Red RC » P Off Road

April 2, 2013

Team SR RB6 front shock tower

Team SR have produced this front shock tower for the Kyosho RB6 buggy. This part provides additional rigidity over the stock piece enhancing reliability allowing the driver to push the limits further and explore the entire performance envelope on and off the track. Sporting the Team SR signature sealed edges, this heavy duty yet lightweight tower is machined from 4mm carbon fiber while keeping the factory geometry and retaining all factory mounting holes. This is a direct replacement for the stock plastic tower with the kit requiring absolutely no modifications. Expect a RB6 rear tower soon.

Source: TeamSR [teamsr.co]

April 1, 2013

JConcepts Finnisher body for XB4

JConcepts have released a Finnisher body for the new Xray XB4. Increased windshield angle provides a steady force upfront during mid-flight wind gusts on large jumps. Forward cab placement changes performance / visible bias which helps steering rotation in low traction corners. The side-pods have been simplified and JC chamfered to remove unwanted changes in height to neutralize the at-speed handling. The chassis to body fit has been tightened up which eliminates empty voids that contribute to mid-flight directional changes. The rear of the cab has a new step feature which allows the placement of a secondary side window and also a louver which can be trimmed to allow air to escape at the top of the body. In addition to the newly designed body, JConcepts has included 2 of the latest 6.5″ wide Hi-Clearance rear wings.

View more images of the body here

March 31, 2013

PSM Racing RC8.2 & RC8.2e central braces

PSM Racing have produced two new central diff/drake braces for the Associated RC8.2 and RC8.2e. The RC8.2 brace will support the Central diff/brake unit and will keep it fixed even on high temperatures. The set comes with two quality Ball Bearings for the brake cams. The RC8.2e brace is similar but is missing the brake cam holes. Both braces are made from 3mm thick high quality carbon fibre and weight 5.6g and 5.4g respectively.

View the RC8-2e brace here

March 31, 2013

Tourex MBX7 2-piece engine mount

More new items from Tourex who have released this 2-piece engine mount for the MBX7 from Mugen. The set consists of lower mounting blocks which are screwed onto the chassis and the two upper parts which can be screwed to the motor housing and are not removed. Pins which sit on the upper blocks aid the fixing and alignment of the engine in the buggy meaning you can quickly and easily remove and re install the engine without the need to realign the motor. Supplied with all the required screws.

Source: Tourex [tourex-shop.com]

March 31, 2013

Tourex RC8 lower suspension blocks

Tourex have released these new lower suspension blocks C & D for the Associated RC8 buggy. Made from 7075 aluminium they are strong precise and allow you to reach 3 degrees of toe in. They are designed to be used with the original RC8 plastic inserts.

Source: Tourex [tourex-shop.com]

March 29, 2013

JConcepts Escape body for SC10B

Introducing the Escape body by JConcepts, specifically designed for the newly released Team Associated SC10B vehicle. Breaking into the world of Short Course buggy racing, JConcepts has stepped up with the first aftermarket body designed around the new high-energy vehicle. The first thing noticed on the Escape is its narrowed front-end which tucks nicely against the chassis geometry. The increased front tuck tightens up the large gap in-between the chassis and stock SC10B body making the Escape a superior jumping body with its first heavy detail. Just above the tucked portion, in front of the cock-pit area, rests a reverse scoop giving an area to trim for more air-relief. A small ledge entering the cab guides the air slightly further than the original body while the main side-pods have chiseled ducts which wrap around the bolt-on plastic caging. Just behind the roll-cage area, number plates are built into the body giving the body a slightly raked look and appropriate place for small racing numbers.

View more details & images here

March 28, 2013

JConcept precut chassis protective sheet

A high-end item used for many years on the performance side of R/C racing is the chassis protective sheet. For years, drivers have hand-cut and fitted their chassis with a clear material protecting the new chassis look and also providing a smooth or slick surface to decrease friction between chassis and dirt surfaces. JConcepts has hit the easy and glamor button at the same time and is now offering a precut and graphically pleasing chassis protective sheet for the most popular 1/10th off-road vehicles on the market. With 2 pieces included per package, the durable and low-resistance material fits each chassis layout like a glove and adds protection and style in one easy package. Available for the Associated B4.2, T4.2, B44.2, SC10, SC10B, TLR22, 22T, 22SCT, RB6, ZX5 FS2, DEX210 and DEX410.

Source: JConcepts [jconcepts.net]

March 28, 2013

Avid RC shorty battery foam set

Avid RC’s new shorty battery foam set is the perfect compliment for racers running the lightweight shorty battery packs in their B4.2 and T4.2. The set includes 2 large, screen printed foam blocks with perforated cut lines which allow for a mid and offset battery location. Also fits older versions, B4, B4.1, T4, T4.1.

Source: Avid RC [avidrc.com]