Red RC » P Off Road

March 22, 2010

ST Racing Concepts SC options & tool updates

ST Racing Concepts has released a complete steering bellcrank set for the HPI Blitz. Because of the type of nylon composite material used on the Blitz, while durable for suspension components, it tends to make the steering components flex under heavy load or from high-torque servos. STRC’s aluminium steering bellcrank system add great precision to the steering and take away any flex. A full set of 4 ball bearings are also included to make sure the bellcrank system operate smoothly and it is available in orange, gun metal, silver and limited edition red. STRC have also introduced a CNC machined aluminium adjustable position battery plate for the OFNA Hyper 10SC that allows owners to adjust the weight distribution of the battery side on the truck. The plate allows for 10mm, 20mm, 30mm move back towards the rear of the truck from stock battery position (In 10mm increments). Available in gun metal or limited edition silver. Finally on to tools where the CNC machined aluminium 4mm/5mm universal turnbuckle wrench is now available in anodized Black, while their popular shock shaft pliers are now available in limited edition blue. Also the CNC machined aluminum 17mm/23mm combo wrench is also now available in red and black.

Click here to see the other new items

March 20, 2010

Associated B4.1 body & wing

Team Associated have made available the B4.1 body and wing in a clear unpainted version. This new shell features Interceptor 2.0 styling along with unique side scoops that give plenty of room for electronics and can be opened up for cooling vents in hot weather. Suitable for the B4 and B4.1 RTR, it comes supplied with 6.5″ high downforce wing, window mask and B4.1 decal sheet.

Source: Associated [rc10.com]

March 19, 2010

Mega 7P & 3P DS4 buggy engines

Following on from the release of the new DS4 on road engines earlier in the week, Mega have introduced their new DS4 buggy motors. The result of continuous development in cooperation with the Mega team and Picco, the new ZX12 DS4 comes in a 7 port and 3 port version with the former featuring improved liner fit, which is set a little higher in the crankcase than the previous version creating a better alignment with the ports. The engine also sports a new lightweight cooling head and finned combustion chamber as well as a new carburetor with improved needles. Also available in an EM version, it has a black case, improved lightweight crankshaft, hand selected piston/liner and work done to the ports of the liner. The 3 port engine is a basic buggy motor which also comes in pull start version.

Click here for more engine photos

March 19, 2010

JConcepts debut new SC items at Cactus Classic

JConcepts send us a quick mail to say that they are debuting three new products for Short Course trucks at this weekends Cactus Classic. The new items are Double Dees and Subcultures SC tires along with Tense wheels for the Slash 4×4. We expect to see the official release very soon along with detailed descriptions and details.

View the other new items here

March 18, 2010

AKA Enduro & Wishbone SC tires & Grooved inserts

AKA have announced the release of the Enduro and Wishbone tires, designed specifically for 1/10 short course trucks and to fit the stock wheels from all the popular brands. Gil Losi, Jr. and Mark Pavidis designed these tires which feature 2.2”/3” bead design and an inner carcass design made to perfectly fit the industry standard AKA closed cell foams. This results in a much more controlled outer sidewall for more consistent handling and tread wear meaning no more cranking in tons of camber to keep the tire patch flat on the ground. The AKA Enduro tread pattern is an all round good tire for just about any surface condition, while the Wishbone is suited to high bite blue grooved clay tracks or indoor clay tracks. AKA have also released of their next generation of tire foams. Based on the original industry standard closed cell foam insert, their new grooved insert is designed to take advantage of the radial ribs the carcass of their Wishbone and Enduro tires while still providing great performance in the other treads. This new grooved insert design is replacing our original non-grooved insert.

Source: AKA [raceaka.com]

March 18, 2010

TQ Racing SX8 Evo Team Spec race roller

TQ Racing have released details on their newest competitor in the 1/8 scale pro market, the SX8 Evolution Team Spec race roller. The buggy sports a narrowed chassis for better weight balance and cornering and optimized gear ratio for US style tracks and jumps. The car features lightweight differentials, titanium hinge pins, turnbuckles & diff cross pins, as well as captured hinge pins and captured hub bearings.

Click here for more images of the buggy

March 18, 2010

HPI Racing Blitz lightweight options

HPI Racing have released a number of new items for their Short course truck, the Blitz. This heatsink motor plate is precision machined from high strength 4mm 7075S aircraft grade aluminium for extreme durability and anodized brown to match other BLITZ aluminum option parts. The plate uses heat sink fins to draw heat away from the motor to keep it running cool, for longer run time and extended motor life. A new lightweight mud flap set helps you save critical weight and still keep the authentic short course look. There is also new aluminium step screws that are approximately 70% lighter than the stock steel screws. They are sold in sets of 10 and available in brown, orange and silver. Other lightweight parts include new aluminium thin lock nuts, a replacement parts for Z663 steel M3 lock nuts. Again sold in packs of 10 and available in orange and silver. Finally there are two new aluminium ball studs, 4.8x12mm and 4.8x15mm, which are sold in packs of 10 and offer 70% weight savings over the stock steel part. Most of these parts are also suitable for the E-Firestorm truck.

Click here to see the other option parts

March 18, 2010

Hudy 1/10th off road set-up system

Hudy have released a set-up system for 1/10 off-road buggies with 4.7mm wheel axles, with both pin and hex drive wheel adapters. Used for super-precise measurement and setting of front/rear camber, toe, steering throw and caster, its wobble-free mounting of the fully ball-bearing equipped set-up stands gives ultra-smooth, ultra-precise movement and operation. The set-up stands are CNC-machined, hard coated high-grade aluminium, while the toe/steering plate is CNC-machined, tough acrylic plastic. All components feature precision engraving for instant, reliable readings. Also new from Hudy are a set of four CNC-machined alu nuts for quick and easy use with the 1/10 off-road set-up system stands. Each end of the nut has a different thread with one side M4, while the other side is 8-32 UNF thread (for American cars).

Click here for more images