Red RC » P Off Road

March 3, 2010

DE Racing XD rear skid plates

DE Racing, makers of the original skid plates, have released their latest product, the XD rear skid plate. Never satisfied with good enough, they have raised the bar and created the “ultimate rear skid plate”. Featuring a new leading edge for greatly improved longevity and performance and new stronger screw countersinks, they are now ultra thin which eliminates the need for longer screws. Race proven using the highest quality engineering resin they wear like aluminium at a fraction of the price and weight. Sold in packs of 3 these new plates are currently only available for the Losi 8ight line of buggies and truggies as well as the Mugen MBX-6 buggy and truggy.

Source: DE Racing [deracing.net]

March 2, 2010

Pro-Line Caliber 2.2″ M3 tires

Following the sneak peak last week, Pro-Line have released their popular Caliber tread for 1:10 Off-Road buggy both front and rear. The Caliber takes tire technology to the next level by optimizing traction, control, balance, and tire wear with its dual-stage design. The smaller top pin penetrates through loose dirt while delivering unbelievable side and forward bite. The base pin works as a support for the top pin while acting as a dual-stage design once the top pin is worn down. You can rely on the base pin for greater tread life wear and it works well on those tracks that are prone to blue-groove or have a super clean surface.

Click here to see the front tire

March 2, 2010

PSM Racing TRF801X CVD axles

PSM Racing have introduced new front/rear and middle CVD axles for the Tamiya TRF801X. Made from 7075 aluminium, for high performance and low weight, they are manufactured with low tolerances to fit perfectly. Designed to improve the weight and acceleration of your rotating parts, they´ve added extra pin positions so you have three positions to change to in the event of wear.

Source: PSM Racing [psm-racing.com]

March 1, 2010

Novarossi 2660 & 2084 tune pipes

Novarossi have introduced 2 new tuned pipes for the 2010 season, the first of which is the EFRA 2660 which is for the 1:10 Touring category. This new pipe may look similar to the last one, but some internal changes means that on the track this new pipe performs better throughout the rev range. Also new for the 1:8 Off-road category is the EFRA 2084, where the company’s quest for better drivability and lower fuel consumption resulted in this new tuned pipe. Falling into the ‘Super Strong’ range, it is more resistant to the rough world of 1:8 scale Off-road competition. Expect to see both in mid March.

Click here to see the 2084 pipe

February 28, 2010

Losi 8ight Titanium parts & Great grease

Team Losi have introduced a number of optional titanium parts for their range of 8ight buggies and truggies. For the 8ight buggy their is this turnbuckle set (above), while there is a similar set for the truggy, both of which consist of 6 pieces and because of their new material, are super strong yet lightweight. For both cars there is also a set of 4 x 21mm hinge pins and also a set of 4 shock stand offs, also made from titanium. Losi have also released their simply named ‘Great Grease’. This is a high grade synthetic grease that stands up to both heat and cold as well as wet and dry with exceptional adhesion qualities. Ideal for spiral gears, CVDs and areas where you want the grease to adhere to moving parts it is supplied in an 8cc tube.

Click here to see the other products

February 26, 2010

MIP Traxxas Slayer & Summit options

MIP have released a number of new products for the Traxxas Summit and Slayer, starting with these spline and center CVD kits, which replace the plastic drive shafts with hardened high strength alloy, used for high power electric systems. MIP Spline technology accommodates both long and short travel suspensions and comes with 6mm bores for new style output shafts. MIP have also introduced an adjustable 2 hole clutch kit for the Traxxas Slayer that has two sets of holes for light or heavy setting and are pre-cut to ensure symmetrically even wear. Easy installation and operation, they offer great durability and wear resistance.

Click here to see the other products

February 26, 2010

O.S. Max-25XZ Truggy engine

New from O.S. Engines is the Max-25XZ Truggy Engine, that utilizes the best balance of power, fuel mileage, size and weight within ROAR regulations to give racers optimum performance at 1/8 truggy and stadium track events. This motor is designed to have more power than .21 class engines, yet less than the .28 class, for better fuel mileage, lighter weight and lower centre of gravity. The supplied double adjustable type carb gives smooth acceleration from low, mid and high speeds.

Click here for the specifications

February 26, 2010

Pro-Line 2.2″ 1/10 buggy Calibers

Pro-Line have released a little sneak peak at the new 2.2″ 1/10 Buggy Caliber rears, that are set to become available next month. Also working on a 4WD front version, which should be ready by April, Brian Kinwald, who has been testing them on his 1/10 truck had the following to say about the new tires: “The Calibers were really dialed…. definitely gunna be a great tire… at a lot of tracks… I think they will become your best seller eventually…once they’re popular…. most club tracks cater to a tire like that and they will last long …. So I think the average guy is gunna love em…”

Source: Pro-Line [prolineracing.com]