Red RC » P Off Road

March 23, 2020

Avid roll out new 1/10th buggy chassis protector sheets

Coming from Avid and made for of the latest 1/10th 2WD and 4WD buggies are new chassis protector sheets. Made by Stickit1Racing the chassis skins come pre-cut for easy installation and they help to protect the chassis bottom when running on highly abrasive surfaces or on track with large jumps. They include an extra removable tail piece when the first gets worn out and the stickers are available in black or white designs and for the B6.2 with +3mm chassis, for the TLR 22X-4, the Xray XB2C/D’20, the Xray XB4’20 and the Yokomo YZ2 DTM3.

View the other decals here

March 23, 2020

Speedzone roll out new Evolution LiPo packs

The latest competition LiPo battery pack releases to Speedzone’s Evolution brand include a 2S slim pack, 2S shorty pack and a 4S pack. The 5500mAh 7.4V 130C slim pack measures 139×37.3×24.8mm and weighs 238g, the 5000mAh 7.4V 120C shorty pack measures 96×46.5×24.5mm and weighs 212g, and the 6000mAh 14.8v 120C pack measures 139x47x48mm and weighs in at 534g. All packs were designed to produce high voltage with low internal resistance and utilize 5mm bullet connectors.

View the other new battery packs here

March 22, 2020

SWorkz S35-4 1/8th nitro buggy kit

Following first impressions of their forthcoming new nitro off-road buggy SWorkz have fully unveiled the S35-4 1/8th scale kit. The buggy is designed for pure racing with the geometry of the car providing optimised corner speed paired with easy handling and maximum traction. The S35-4 is based on a new T7075 hard anodised and lightened aluminium chassis that sports a wide layout while the newly developed HET differentials being also included to provide an amount of traction that wasn’t possible with the previous systems. The kit also comes with a lower shock tower layout in the front and rear and the construction of the shocks is adapted to that new optimised layout. The steering geometry, with new Ackermann and steering plates, gives the driver the feeling of total control over the buggy. Also part of the kit are new suspension mounts that utilise new square inserts, allowing the buggy to be adapted to a wide range of track conditions. The lower front and rear arms are moulded using a newly developed composite material and they are of an updated design to fit the new chassis geometry. The side guards were redesigned in the same way. Another development are the totally designed rear hubs. Composite material combined with carbon plates gives drivers the possibility for various setups. The newly developed composite material is working perfectly together with the HET differentials to provide maximum traction. With the new lightened wing support owners can adjust the position and angle of the wing to give the buggy perfect on-track balance and together with the optimised new body shell, the aerodynamic system is working perfectly together. The kit is set for a release in the first half of April.

View a list of the features and more images here

March 20, 2020

Team Associated RC8B3.2 Team Kit 1/8th buggy

Following the introduction of the new RC8B3.2e Team Kit E-buggy, Team Associated also announced the soon release of their new RC8B3.2 Team Kit nitro buggy, the follow-up model to the IFMAR World Championship winning RC8B3.1. The engineers of Area 51 Design Works focused on key components that improved durability, accelerated maintenance, and expanded upon its race-winning heritage within the RC8B3 platform. An all-new suspension arm design improves performance in all conditions: bottom-loaded inserts adjust flex characteristics and longer overall length, with reduced rear arm mount width. A 4-piece centre bulkhead allows for easier access to the center differential, making adjustments even faster. The all-new radio tray design features an enclosed battery box, a larger receiver box, integrated switch and transponder mounting, and adjustable flex configurations. Updated shock caps allow the RCB3.2 to be run with the included new stiff bladders, standard bladders, or as emulsion with no bladders – all with the same cap. The kit is set for a release in May.

View a list of the key features and more images here

March 20, 2020

Team Associated RC8B3.2e Team Kit 1/8th E-buggy

Team Associated have introduced the new RC8B3.2 Team Kit 1/8th scale electric buggy. Already a proven platform, the RC8B3.2e looks to add to the portfolio of victories. No stone has gone unturned when considering the makeup of the RC8B3.2e. The geometry of the suspension has been critically analyzed to determine improved areas of performance, resulting in a new suspension arm design with inserts to adjust flex characteristics and keep dirt out. The combination of a longer rear suspension arm, narrower suspension arm mounts and an overall wider rear track width has proven to increase driver comfort, consistency and speed. Updated shock caps allow the RCB3.2e to be run in two different configurations: As emulsion type with the bleeder screw and seal, or bladder type with the included new stiff bladders, or optional traditional bladders. The side guards have also been improved by changing the attachment method to FHCS that thread into the chassis from the top of the buggy. This increases the durability of the side guard while improving alignment to the chassis. Like the RC8B3.2 the electric-powered kit is set for a release in May.

View a list of the key features and more images here

March 20, 2020

SWorkz S35-4 nitro buggy kit – Coming soon

SWorkz have released first images, as part of a social media video, of their forthcoming new S35-4 1/8th scale nitro off-road buggy. The short video clip actually hides more than it show but we bring you full details on the kit as they surface. The release date is set for April for now.

View more images here

March 20, 2020

T-Works RC8B3.1 DLC coated shock shafts

Coming from T-Works and made for the Team Associated RC8B3.1 buggy are two sets of DLC coated shock shafts. Available as 54.7mm front and 63.8mm rear variants, the shafts offer a slick surface, ensuring exceptionally smooth operation and a long life of both the shafts and the shock seals. Available separately for the front and the rear the sets include mounting hardware for the shock pistons.

View the rear shock shafts here

March 20, 2020

Pro-Line introduce new pre-mounted SC tyres

Coming from Pro-Line are four new pre-mounted 1/10th short course tyres on the Raid removable hex 2.2”/3.0” wheel. The range will include the Badlands SC, Trencher X SC, Sling Shot SC and Street Fighter SC tyres all of which come mounted on the new Raid removable hex wheel that allows to easily change the offset of the wheel to fit different applications by simply changing out the hex. The wheels include a pair of 12mm Slash 4×4 front/rear and Slash 2WD rear hexes as well as a pair of 12mm Slash 2WD front hexes that fit the most popular trucks. Optional 14mm, 17mm and ProTrac offset 12mm hexes are available separately to fit other applications. The pre-mounted tyres come as pair and including closed cell inserts.

View the other new tyres here