Red RC » P Off Road

January 24, 2020

Castle Creations 2028 Extreme 800kV sensored BL motor

Castle Creations have introduced their new 2028 Extreme 800kV sensored brushless motor for large scale applications. The 4-pole 12-slot motor is of an updated design for improved efficiency and less heat build-up. Running modes include sensored and an ultra-efficient sensorless mode and high-strength, high-temperature grade neodymium sintered magnets combined with high-strength Kevlar wrap ensure the integrity of the rotor is not compromised during harsh running conditions. In addition do oversized NMB bearings and a vibration dampening system ensure the longest bearing life possible. Castle’s proprietary winding techniques also allow to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor and dual sensor ports ensure optimal installation in pretty much every large-scale vehicle such as the Losi 5ive-T, 5ive-B or DBXL-E.

View a list of the specifications and more images here

January 24, 2020

Yokomo roll out new YZ-2CAL3/DTM3 alloy optionals

Coming from Yokomo and made for the YZ-2CAL3 and DTM3 buggies are new aluminium steering and rear suspension optionals. Starting with the front of the car, new are aluminium bellcranks, a centre link and a bellcrank base, all machined from high-quality aluminium and featuring a black surface coating for wear and looks. The parts are direct replacements for the standard kit items but due to being stronger, they help to improve steering emphasis especially on high-bite surfaces. The bellcrank set, steering link and steering base come separately and they will hit stores very soon. Also new is an aluminium rear upper arm mount for the YZ-2DTM3. It matches the wide suspension mount standard of the dirt spec buggy and due to its geometry it optimises the camber change during suspension compression. The part offers three inner ballstud mounting positions and it come machined from high-quality aluminium and with a black surface coating. Last but not least is an aluminium rear hub carrier set that was designed to support 3mm outer suspension pin setups. The multi-piece rear hubs feature separate camber link ballstud mounts, allowing to easily adjust the turnbuckle length while vertical ball studs make roll centre adjustments a breeze. The set includes composite inserts to change the suspension pin height and using the alloy rear hubs will increase traction on a variety of surfaces while adding overall rigidity and stability.

View some of the other new parts here

January 23, 2020

Reds Racing 721 Scuderia Gen2 – Coming soon

Reds Racing have announced the soon release of their 721 Scuderia Gen2 3.5cc engine. The power plant will become available in two cooling head colours; a black anodised and a red toned, allowing racers to choose their favourite colour or match the cooling head with the body shell colour. Check back soon for full details on Reds Racing’s latest 7-port competition off-road engine.

Source: Reds Racing [reds-racing.com]

January 23, 2020

Kyosho MP10 heavy duty front arms

Available soon are new heavy duty front lower arms for Kyosho’s MP10 buggy. Sturdier than the stock arms due to additional ribbing, the heavy duty variants will come in handy when the going gets tough or when running in higher ambient temperatures or traction conditions where the arms can increase steering precision. Included come a left and a right hand arm and the sets are available in hard and soft variants to further fine-tune the front end feel.

Source: Kyosho [kyosho.com]

January 23, 2020

Axial Yeti Jr. aluminium & steel optionals

Coming from Axial Racing and made for their Yeti Jr. off-road vehicle are several new aluminium and steel optionals. The range includes steering knuckles, C-hub carrier sets including king pin bushings, rear axle shafts with integrated 8mm hub, a steering rack set as well as rear aluminium lockers. All parts are machined from high-quality 6061 aluminium and they come with a hard anodised surface finish for wear and looks. Also new are 48.5mm front axle shafts and a steel rear driveline that replaces the stock plastic driveline parts for increased strength.

View the other new parts here

January 23, 2020

Hipex EFRA 2135 Evo3 exhaust pipe

Just announced from Hipex is their new EFRA 2135 Evo3 exhaust pipe for .21 engines. The EFRA-homologated 3-chamber pipe is an alternative to the 2135 Evo2 and features a different position of the pressure intake, resulting in optimised fuel consumption. The exhaust is best used in combination with the Hipex 21 L50 manifold.

Source: Hipex [hipex.it]

January 22, 2020

Ruddog RP541 540 sensored brushless motor

Ruddog Distribution from Germany have announced the release of their all-new RP541 540-size sensored high-performance brushless motor. Designed and engineered in Germany the motor utilises a completely new design with a lightweight aluminium can ensuring a low weight of only around 153g while the new slotless stack design ensures increased performance and efficiency due to the lack of performance-killing milling for the long motor can mounting screws. This was made possible by using a new can design with a 1-piece front section and a short rear can that uses vertical mounting screws. Also new for the RP541 is a machined collector ring that comes silver-plated for the modified variants while the stock motor specific ring is gold-plated for an even lower internal resistance. Other differences between the stock and modified motors include performance enhancing ceramic ball races for the stock motor while the modified motor is equipped with high-qualify steel ball bearings. Part of the package are also optimised magnets that are able to withstand higher temperatures for longer, ensuring less power fading during a run while increasing overall durability. The magnets are also optimised for the RP541’s new slotless stack design. The motors are rounded out by new low-resistance solder tabs and a flat 150mm sensor wire and they are available as 4.5T to 9.5T modified, 6.5T 1S 1/12th scale modified as well as 10.5T to 21.5T stock variants.

View more images here

January 22, 2020

GForce Classic Pack 7.4V 2100mAh LiPo battery

GForce from Japan have introduced their all-new Classic Pack 7.4V 2100mAh LiPo battery that mimics the appearance of a NiCD racing pack battery. The lightweight battery weighs in at only 105g and it is built using high-quality 40C cells, ensuring good power supply for mild brushless and brushed motors while the black and golden appearance suits many vintage RC cars as does the oval diameter that is ideal for all cars that require a so called racing pack specification. The battery comes pre-wired with a Tamiya-style power connector and an industry standard balancer port and it will become available by early February.

Source: GForce [gforce-hobby.jp]