Red RC » P Off Road

December 6, 2019

RC Maker 3D Pro ESC wire organiser

RC Maker have introduced their new ESC wire organiser for the use with most brushless electronic speed controllers. Wiring is difficult, especially on the new mid motor chassis with the ESC behind the motor. The belt is in the way and there really isn’t much room. That is why the designers have gone and made it a whole lot easier for the drivers. 3-D-printed from high quality composite material, the wire organiser keeps all three motor wires, plus the sensor wire bunched together, and stuck down. The part is also very useful for keeping the wires organised in 1/12th on-road, and 1/10th off-road chassis and it accepts any wires, 12 gauge or smaller, and all sensor wires, flat or bunched. The organisers is usable floating or taped down using optional double sided tape.

View more images here

December 5, 2019

Kyosho Speed House Torx 10 brushless motors

Kyosho have announced the soon release of their all-new Speed House Torx 10 540-size brushless motors. The sensored motors were developed for high-performance competition use, offering high efficiency, a low weight and exceptional heat dissipation thanks to a highly machined case. Sturdy heavy-duty solder tabs and a rearward-facing sensor port round out the package. The 5.5T to 10.5T modified motors will come equipped with a 5.0×12.3×24.0mm rotor while the 13.5T to 21.5T stock motors are tuned using a 5.0×12.5×24.2mm rotor.

Source: Kyosho [kyosho.com]

December 5, 2019

Xray XB2 aluminium steering optionals

Xray have introduced new aluminium option parts for their XB2 series of off-road buggies. First up is an aluminium steering arm set machined from high-quality 7075-T6 material. The black coated parts feature an added steering linkage mounting position on the right hand arm for an additional steering setup possibility and the set includes two steering arms.

Continue reading here

December 5, 2019

FastRace 1/8th off-road V2 centre drive joint

Coming from FastRace are new lightweight V2 centre drive joints for Team Associated, Mugen and SWorkz 1/8th off-road kits. Machined from high-quality Ergal material and featuring a lightweight design, the coupler offers exceptional durability due to four steel pins that prevent the driveshaft’s drive pins from grubbing into the coupler’s aluminium surface over time. An additional surface coating ensures further improved wear characteristics.

Source: Planet Racing [planetracing.it]

December 5, 2019

Redcat International Scout II Gen8 AXE Edition crawler

Redcat Racing have introduced their new International Scout II Gen8 AXE Edition RTR crawler. The vehicle is the world’s first Ready-to-Run scale crawler using a brushless motor and ESC as it features a Hobbywing Xerun sensored AXE system including a brushless motor and ESC, Reefs RC 422HD V2 metal gear waterproof servo, and Flysky GT5 6 channel radio. The new Gen8 AXE is all about precision control, as well as durability. The Reefs 422HD V2 steering servo has an extremely high 30kg-cm torque rating for ultimate steering power, while its digital coreless motor offers incredible precision. All of this power and precision is transferred through steel internal gears for durability. This allows the driver to manoeuvre the Gen8 AXE through the toughest obstacles with precision and authority.

Continue reading here

December 4, 2019

VRP D819/E819 V3 rear shock tower

New from VRP is the V3 rear shock tower for the HB Racing D819 and E819 line of buggies. The tower features new shock mounting holes that are mid spaced. This is the newest mounting positions being ran on the HB buggies. Another feature added to the V3 tower is the wing mounting holes. There are sets of holes that allow drovers to use the stock wing mount in the stock locations as well as move them up, or use the MBX8 wing mount for a finer wing height adjustment. The V3 shock tower is available in silver anodised aluminium as well as carbon fibre.

Source: VRP [visionracingproducts.com]

December 4, 2019

RudeBits SRX2 & SDX4 shock tower protectors

RudeBits have introduced their new front shock tower protectors for the Serpent SRX2 and SDX4 buggies. 3-D-printed from high-quality material the add-on protectors save carpet and astroturf tracks from shock towers digging in, resulting in longer life of both the track surface and also the shock tower and upper shock caps. The protractors are light of weight and easy to attach using the included hardware and they are available for the SRX2 Gen3 gullwing front shock tower, the Gen3 kit front shock tower and the SDX4 front shock tower.

View more images here

December 4, 2019

Muchmore Fleta ZX V2 ER Spec titanium rotor motor

Muchmore have introduced their new Fleta ZX V2 ER Spec stock class brushless motor that comes including the MR-FZR21X 12.5×7.25×24.2mm [X] titanium rotor. Available as 17.5T and 21.5T variant, the motor will produce increased torque which comes in handy especially for blink buggy classes and when running in high-bite traction conditions. Besides the rotor, the motor makes use of the same features as the standard ER Spec series, meaning it utilises the highly machined Flow-Max 2 aluminium can, a high-power stator, heavy-duty solder tabs and an adjustable timing end plate.

Source: Muchmore [muchmoreracing.net]