Red RC » P Off Road

December 4, 2019

Muchmore Fleta ZX V2 ER Spec titanium rotor motor

Muchmore have introduced their new Fleta ZX V2 ER Spec stock class brushless motor that comes including the MR-FZR21X 12.5×7.25×24.2mm [X] titanium rotor. Available as 17.5T and 21.5T variant, the motor will produce increased torque which comes in handy especially for blink buggy classes and when running in high-bite traction conditions. Besides the rotor, the motor makes use of the same features as the standard ER Spec series, meaning it utilises the highly machined Flow-Max 2 aluminium can, a high-power stator, heavy-duty solder tabs and an adjustable timing end plate.

Source: Muchmore [muchmoreracing.net]

December 4, 2019

Dash RC anti-tweak sensor wires

Dash RC have announced the release of their new anti-tweak sensor wires. Available in 50mm, 100mm, 125mm, 150mm, 175mm, 200mm, 250mm, and 300mm length, the high-quality sensors wires are very soft, ensuring easy routing and very little influence on chassis and power pod tweak when used in pan car classes. Additionally the flat design allows to route the wires underneath motors or speed controllers which comes in handy for touring cars and buggies.

View some of the other wires here

December 3, 2019

Leadfinger Racing A319 A2.1 Tactic body shell

The latest 1/8th buggy to receive Leadfinger Racing’s A2.1 Tactic body shell treatment is the Agama A319. First introduced in mid-2019, the A2.1 Tactic body design has proven itself on the track with a handful of different platforms. Fitment, performance and looks are key in every design, and every platform presents different challenges with each layout. The Agama was no exception. Fuel tank location, and the position of throttle and brake bias linkages needed to be taken into consideration. LFR were looking for a low profile and sleek design to fit the A319 perfectly. The designers were able to combat these differences by stretching the rake of the windshield and adding to the size of the side pod scoops for just the right amount clearance. To keep performance in check, additional down force was added to the rear of the side pods and rear centre of the body. As things started to come together, Leadfinger Racing topped off the cab with a shark fin for stability. To finish off the design the body includes a front scoop for even more tuning ability. As usual the body comes moulded from high-quality polycarbonate material and it includes window masks and a decal sheet.

View more images here

December 3, 2019

JConcepts Detox Aqua compound 1/8th buggy tyre

Available soon from JConcepts is the Aqua compound Detox 1/8th buggy tyre. Designed for demanding track conditions, the closely spaced tread creates the ultimate long main event tyre and combined with the compounds such as blue, green, R2, O2O2 and Y2 and now, aqua gives racers an option for just about any temperature requirement. The design revolves around the centre structure which has hefty lugs arranged in a stacked configuration. The lugs have strategically placed cuts and grooves to allow flex in dusty conditions to perform even if the track is deteriorating while a long main is in progress. The outer portion of the tread fits together like building blocks, with shapes placed together that nest well but also work together to flex laterally to provide steadfast side-bite. The tread tapers off cleanly to the outer side-wall giving a smooth transition during hard cornering. The tyre comes including Dirt-Tech closed cell inserts.

Source: JConcepts [jconcepts.net]

December 3, 2019

JConcepts Ellipse 2.2” 2WD & 4WD front tyres

JConcepts have introduced the 2.2” 2WD and 4WD front tyre variants of their popular Ellipse tread. The Ellipse, named after the centre bar built into the tread, is a compliment to successful tyres such as the Dirt Webs and Space Bars. The “web” style tyre was built to compete on smooth high-grip indoor and outdoor surfaces which require a finely detailed connected bar pattern. The centre section of the tire is a home run utilising a diamond “home plate” footprint to provide massive surface area for better footprint and increased longevity. The web of extensions are unique and have a directional touch giving the racer the ultimate tune-ability. Jason Ruona explains, “The Ellipse front tire has a slightly wider carcass, it allows the driver to attack high-speed sections with more comfort and smooths the steering of a 2WD buggy. The “home plate” and connected web of tread has a large footprint and 1000’s of edges to produce steering connection. Connected tread wears together which is useful racing indoors where a racer requires surface area to produce steering.” The Ellipse tyres are available in a huge selection of compounds such as blue, green, aqua, gold and the ROAR National Champion, silver compound. Included in each package, the Dirt-Tech closed cell inserts known for their durable nature and grey colour complete the race tuned package.

View the 4WD front tyres here

December 3, 2019

RudeBits R2.1 lightweight off-road rear wing

RudeBits have introduced the lightweight variant of their popular R2.1 1/10th off-road rear wing for 2WD and 4WD buggies. The R2.1 has been designed for a slick look with plenty wheel clearance and it was extensively tested to provide better cornering ability. Its straight rear edge allows the air to force down evenly across the rear and it features a built-in 4 degrees base angle. Made from lightweight polycarbonate material the wing weighs in at only 16g.

Source: RudeBits [rudebits.co.uk]

December 3, 2019

RC-Project MBX8 Ackermann steering kit

Coming from RC-Project and made for the Mugen MBX8 series of vehicles is an Ackermann steering kit. The set was developed to optimise the steering characteristics of the vehicles by allowing for full steering lock and increasing the steering angle of the outer wheel by 12 degrees. This results in better turn in and more consistent cornering while making the car easier and more precise to control in fast sections also. Part of the package are redesigned outer steering spindle plates that offer two different steering link positions, the standard “S” marked position for high-grip and a new aggressive “A” geometry for slippery tracks. The set is machined from high-quality 7075-T6 Ergal material, the parts come with a black surface coating for wear and looks and also included are Reverse-type pivot balls whose updated geometry fine-tune the whole steering system.

Source: RC-Project [rc-project.it]

December 3, 2019

JConcepts JCI Creep 12.3″ wheelbase body

JConcepts have introduced their new JCI Creep 12.3” wheelbase crawler body shell for trucks such as the Traxxas TRX-4 Sport, the Element RC Enduro and the Axial SCX10. The Creep began a hard life working the local farms, occasional fair and eventually into the mud pits. Pulling the Creep from the hard work of a farm truck wasn’t easy, however, JConcepts has dropped the cloth on a new crawling legend. Starting with a crisp front-end, the narrow truck has a skeleton like grille and beady eyes that have an angular V shape structure setting up the hood line and front-end clip. The long nose dead-ends into the V-shaped windshield which transitions into a large single cab providing that all-important vintage feel. It was important for this body shell to have a bed area that allowed ample mounting space for different chassis combinations but also space a user can experiment with their own accessories. Behind the rear cab bracing, a bed area rests with hard rails up top for strength and security. A dove-tailed rear end gives clearance and a rather experimental aggressive look to the rear panel. The front and rear are equipped with a flange style, sheet metal appearing, wheel well housings which gives the Creep its military fit and finish. The body includes window masks and a detailed JCI Creep decal sheet.

View more images here