Red RC » P Off Road

February 27, 2019

Mon-Tech Racing body hole protectors

Mon-Tech Racing from Italy have introduced their new 20-piece set of pre-cut body post hole protectors. 0.30mm thick the self-adhesive rings are made to protect the body post holes of new or used body shells, ensuring longer life by reinforcing the highly stressed area. In addition the stickers also prevent the paint from becoming scratched, making the body look good for longer. Each pack contains 20 rings, enough to outfit five on-road body shells.

Source: Mon-Tech Racing [mon-techracing.net]

February 27, 2019

Samix adjustable servo horns

Coming from Samix are adjustable servo horns for 23T and 25T spline servos. The arms are machined from high-quality aluminium and their design, that utilises flippable and interchangeable inserts, allows to access 17mm, 18mm, 19mm or 20mm centre hole distances, giving the ability to fine-tune steering throw and speed. The arms are of a clamping design to provide additional security and reliability when accidentally loosing the main servo horn screw and they come laser-engraved for easy identification.

View more images here

February 26, 2019

Team Associated CR12 Tioga 1/12th scale trail truck

Team Associated have introduced the CR12 Tioga 1/12th scale trail truck, the latest in AE’s line of CR12 series ready-to-run vehicles. The 4×4 rig comes RTR with Reedy Power electronics and meets S.O.R.R.C.A. class 1 and 2 rules right out of the box. No need to prep or build your rig; just charge it and you’re ready to hit the trails. Designed not only for scale looks with realistic wheels, tires and body, the CR12 is built for performance as well. The steel ladder frame chassis provides the perfect backbone for this rugged rig. The 4-link suspension, threaded shocks, and soft rubber tires give the grip and performance needed to climb over the roughest terrain. Transferring power to the rocks is a compact 3-gear transmission, plastic low-friction slider-type drive shafts, front steel CVA axles, and metal-shield ball bearings. The truck is rounded out by a molded rear cage with hinged body mount.

View a list of the features and more images here

February 26, 2019

Xray XB4 low height front & rear springs

Xray have announced the release of new low height front and rear springs for the XB4 off-road buggies. The 42mm front and 57mm rear springs are 3mm shorter compared to the previous 45mm and 60mm variants, allowing for lower read heights when running in high grip track conditions. The springs are available as softer “2 dot” to harder “4 dot” variants and they are manually measured, selected and matched into pairs to guarantee precisely equal length and damping characteristics.

View the other new springs here

February 26, 2019

HPI Racing Jumpshot ST & MT wheelie bar set

HPI Racing have introduced a wheelie bar set for the Jumpshot ST and MT 1/10th scale 2WD trucks. This wheelie bar will stop the Jumpshot truck from flipping over when using full throttle, and it features adjustable mounting that will allow to alter the wheelie angle so drivers can pull perfect wheelies every time. The set includes everything needed to assemble and install a unique wheelie bar on the rear of the Jumpshot MT or ST and it will also fit the Jumpshot SC with the removal of the rear bumper.

View more images here

February 25, 2019

Xray XB2 gearbox height adjustment plates

Xray have introduced new carbon fibre gearbox height adjustment plates for the XB2 series of buggies. Machined from 2mm carbon fibre the plates are available in two designs, a T-shaped spacer to raise both the gearbox and rear suspension mounts by the same amount and also a smaller plate that only raises the gearbox. An optional -2mm aluminium motor plate will ensure the motor sits as low as possible, ensuring a low overall centre of gravity. Raising the gearbox, or lowering the chassis, will ensure optimised driveshaft angles, a lower centre of gravity and thus less rolling in corners in high to very high bite conditions. All parts are available separately to help create the desired setup.

View the other new parts here

February 25, 2019

T-Works RC8B3 series alloy wheel hubs

T-Works have introduced new aluminium wheel hubs for the Team Associated RC8B3 series of buggies. Machined from aircraft-grade 7075-T6 aluminium and coming black anodised for wear and looks, the wheel hubs are available in standard, +1mm or +2mm offset configurations, allowing to adjust track and overall width easily. The standard offset hubs come as 4-piece sets while the +1mm and +2mm kits include a pair of hubs with the letter two sporting laser-etched markings for easy identification. The wheel hubs fit all RC8B3 and B3.1 buggies.

View the +1mm and +2mm hubs here

February 25, 2019

Exotek YZ-2 series LiPo tab set

Exotek have announced the release of carbon fibre LiPo tabs for the Yokomo YZ-2 and YZ-2T. Designed to replace the stock plastic tab with simpler, more secure and better working large sized carbon fibre tabs, the set includes two battery hold downs cut from carbon fibre as well as hardware and an instruction sheet. To make the set work on the YZ-2 buggy, the it requires the side rails and LiPo cups from the YZ-2T truck which are a direct fit on the YZ-2.

View more images here