Red RC » P Off Road

December 31, 2017

PSM B64 V2 carbon fibre shock towers

PSM from Germany have introduced their new V2 carbon fibre shock towers for the Team Associated B64 buggies. Both offer a refined suspension geometry with fewer holes for the upper shock mounting and camber link positions which translates to easier vehicle setup and improved overall rigidity. The front tower is machined from heavy duty 5mm material while the FXO rear shock stay is cut from 3.5mm material. Both offer a double stacked design, they weigh in a 9.3g and 11.5g respectively and both qualify for PSM’s unique DRS damage replacement service.

View the rear shock tower here

December 30, 2017

STRC TRX-4 brass C-blocks & portal drive covers

Coming from ST Racing Concepts and made for the Traxxas TRX-4 trail truck are brass front castor blocks and portal drive outer housings. The parts increase the weight and add a combine total of nearly 170g to the lower portion of the vehicle. Having more weight towards the lower part of the scale crawler can help with stability and climbing capability of your vehicle and brass option parts with its combination of durability and heavier weight can help achieve this performance edge on your crawler. They are available separately, come as pairs and are black treated for a realistic look and durability.

View the axle covers here

December 29, 2017

JConcepts Triple Dees 1/8th truck tyre

JConcepts have introduced their new Triple Dees 1/8th truck tyre. Based off of the iconic Double Dees design the tread was developed for loose and tacky track conditions that require small pin designs. Starting with finely spaced square mini lugs, the JConcepts design team spent considerable time proofing this design. Centre bar structure is important for wear characteristics and an overlapping and blended centre bar was created. The bar draws up the side of the pin to maintain all important support but the main stance is low so the tyre maintains its clean-out ability during acceleration. The main-stay of the design is the angled and sharp pins which spread across the carcass in an open pattern touching off the track surface like no other. Near the side-wall the pins have been trimmed and angled to give racers a smooth driving experience as they enter and exit tacky turns or slightly rough terrain. Available in grippy compounds such as blue, green and long-wear R2 the new tyres are packaged in reusable packaging for freshness and convenience and they come including grey Dirt-Tech inserts.

Source: JConcepts [jconcepts.net]

December 29, 2017

T-Works B6 series steel CV driveshaft set

Coming from T-Works and made for the Team Associated B6 series of 2WD off-road buggies is a new steel rear driveshaft set. The 65mm long CV-style shafts are made from high-quality material and they come black coated for wear.

Source: T-Works [rc-tworks.com]

December 29, 2017

Exotek EB410 rear brass weight set

Exotek have introduced a brass rear weight set for the Tekno EB410 buggy. Made of brass and black coated to reduce corrosion, this weight set is designed to easily bolt on to the rear of the EB410 with an extra low profile. The main weight is 40g and included are two add on 8g weights so that drivers can tune the rear weight of the buggy as needed. The weight set is also slightly angled off of the chassis to maintain chassis flex. Sold separately are additional 8g weights to add extra grams if needed.

View more images here

December 29, 2017

JConcepts MT410 protective overtray

Coming from JConcepts and made for the Tekno RC MT410 monster truck is a protective overtray. When racing or bashing on a loamy or top-soil dirt surface, the inside of the MT410 chassis can become loaded with dirt or debris which creates extra weight. With the overtray these worries are minimised as the accessory fits snug around the entire chassis structure while being attached along the sides of the chassis with hook and loop tape for easy access. The overtray is built with height to provide extra room for various electrical and battery configurations but is still low enough for a clean fit and installation. There is a slight opening at the front-end which manoeuvres around the steering assembly and top-deck and also an open rear-end to provide some natural air-flow in and out of the closure. The tray has large front and rear trim-able openings which can be detailed for air-in and escape. The overtray comes clear and untrimmed.

View more images here

December 28, 2017

Losi 1/6 Super Baja Rey 4WD RTR desert truck

Coming soon from Losi is the 1/6 Super Baja Rey 4WD brushless RTR desert truck. The truck offers realistic handling characteristics like the big boys, thanks to the long travel solid 4-link rear axle and independent front A-Arm suspension. Four long-travel coil-over shock absorbers soak up any form of terrain and the chassis is equipped with an aluminium main plate and a sturdy 4×4 driveline with adjustable differentials. The truck is topped it off with an authentic four piece body, full bodied roll cage, and driver figures. A Dynamite Fuze 1200kv 6S-capable motor and 160A speed controller help to propel the truck to speeds of up to 80km/h and the control is taken care of by a Spectrum DSMR radio system with Active Vehicle Control technology.

View the features and more images here

December 28, 2017

SWorkz S12 series aluminium rear hub carriers

Coming from SWorkz and made for the S12 series of buggies is an aluminium rear hub carrier set. It is made from high-quality alloy for improved durability and offers an updated design with six new upper camber link mounting positions for enhanced tuneability. In addition the hubs are usable with the smaller 6x12x4mm ball bearings for a lower weight.

View another image here