Red RC » P Off Road

May 9, 2017

Team Associated B6 gearbox/bulkhead shim set

Team Associated help to add more front and rear tuning adjustments to the B6 and B6D buggies with the B6 gearbox/bulkhead shim set. The front bulkhead shims are used between the chassis and front bulkhead to lower front roll centre which provides a smoother steering response and increases mid-corner steering. The rear bulkhead shims are used between the chassis and rear gearbox, optimising dogbone angle when running at low ride height. The set includes precision-moulded composite parts and all needed fasteners.

Source: Team Associated [teamassociated.com]

May 9, 2017

JConcepts 1979 Ford F-250 SuperCap MT body shell

JConcepts have introduced their new 1979 Ford F-250 SuperCap body shell for 1/10th scale solid axle monster trucks. The iconic body style shaped and revised by Ford, specifically for the 1979 model year, features rectangular headlights and a one-piece centre grille and JConcepts has built a ground-up design which embodies everything that is special about this piece of truck history. To start this project, JConcepts meticulously set their sights on the 1:1 vehicle replicating the finest details of the 1979. The heavily chiselled, square body look with enlarged, flat-top wheel wells set this body off as a favourite. The recessed body line extends down the entire side of the standard cab body and the included decal sheet details this section to appear like the chrome trim of yesteryear. The wrap-around front windshield, recessed side windows are outlined to perfection while the body lines are all in place to show off that vintage look. Perhaps the most important part of the design, the front headlights, grille, taillights and tailgate are replicated with a decal sheet giving that all important, high-impact look. Included in the package, JConcepts includes a separate front and rear bumper which can be attached for the ultimate show and shine ride. The 12.75″ wheelbase gives drivers options for mounting to an extended length chassis while the flat bed area gives plenty of space for body mount locations or customised with bed cover look.

View more images here

May 9, 2017

Reds Racing VX 540 17.5T high torque brushless motor

Coming from Reds Racing is the new VX540 17.5T high torque electric brushless motor. Complementing the already existing 13.5T and 21.5T high torque variants, the motor offers a precision-machined 6061-T6 high airflow can, a balanced sintered rotor as well as low resistance solder tabs. The specially tuned motor will offer increased low-RPM torque while maintaining unchanged top speed, making it ideal for tracks that requires both lots of bottom end power and speed.

Source: Reds Racing [reds-racing.com]

May 9, 2017

RPM DEX8T & Kraton rear A-arms

Coming from RPM and made for the Team Durango DEX8T and Arrma Kraton line of off-road trucks are rear A-arms and mud guards. Starting with the A-arms, the parts are moulded from RPM’s renown nylon compound for rigidity while the design also eliminates slop as the parts reduce the amount of movement of the A-arm at the hinge pins, providing for better suspension response and more consistent suspension settings. The next improvement is the addition of a second shock mount hole further out on the arm, providing for a lower profile suspension set-up. This second shock mount allows the shocks to lay down further and lowers the ride height for a lower centre of gravity. This second shock mount matches the additional shock mount hole on RPM’s DEX8T/Arrma front A-arms. On top of this the arms are about ten percent lighter while also allowing to attach RPM’s optional mud guards. The arms are sold in pairs, they replace the stock Arrma AR330249 and stock Team Durango TD330707 parts and Team Durango’s stock mud guards are not compatible with these A-arms.

Continue reading here

May 9, 2017

LRP tease X22 540-size brushless motors

LRP have released first information on their forthcoming X22 electric brushless motors. Follow-up model of the successful X20 series, that has won three World Championships, multiple European and National as well as ETS and EOS titles, the motors will sport an updated, ultra-lightweight and precision machined 7075-T6 aluminium housing with maximised cut-outs and additional openings on the flat parts to further increase the cooling surface and lower the running temperatures due to improved airflow even at maximum loads. The most noticeable change has been made at the surface of the housing. The X22 comes with the “dark shine black” anodising with X22 engraving that will make it stand out in every chassis.

Continue reading here

May 9, 2017

Exotek introduce new B6 & B64 alloy option parts

Coming from Exotek are new aluminium option parts for the Team Associated B6 and B64 off-road kits. First up is an aluminium front camber mount for the B6 and B6D. The heavy duty 7075 alloy bulkhead is intricately machined to reduce its weight to only 15 grams, which is only four grams more than stock, while insuring its heavy duty construction. The part maintains stock geometry and it is available in polished factory blue or black.

Continue reading here

May 9, 2017

Avid carbon fibre dogbone servo mount spacers

Avid have introduced their new dogbone-shaped carbon fibre servo mount spacers. They come in two thicknesses of 1.5mm or 2.5mm and provide the servo with a rigid mounting surface to ensure that the servo stays tight and the screws do not loosen as the plastic shims compress over time. The spaces can also be used to shift weight around by moving a servo forward or even up in 8th scale vehicles. The spacers come in sets of two in either 1.5mm or 2.5mm thickness.

View the 2.5mm spacers here

May 8, 2017

Raw Speed B6 wing drilling jig

Raw Speed have introduced a wing drilling jig for their own 1/10th buggy wing. Featuring mounting positions for the Team Associated B6-series buggy, the jig allows for centred and square mounting positions, doing away with the need to hand-fit the positions every time. The 3-D-printed jig is available for Raw Speed’s wing only, with more variants for the TLR 22, Kyosho RB6.6, Xray XB4 and Yokomo YZ coming soon.

View more images here