Red RC » P Off Road

March 23, 2017

JConcepts YZ-2 elephant trunk style chassis brace

JConcepts has added a new item to their Shapeways store for Yokomo YZ-2 owners using a laydown transmission. The elephant trunk style chassis brace replaces the stock unit and uses a single column support which promotes flex characteristics giving traction gains associated with these types of adjustments. With the single post, there is also increased clearance around the motor and tabs for easier soldering and wire routing. The built-in ledge helps minimise issues with the battery brace popping out during hard landings and crashes. The mount attaches at the top and bottom with stock hardware and it is available directly through JConcepts’ Shapeways store.

View another image here

March 23, 2017

HB Racing D413 hard suspension arms

Coming from HB Racing are hard suspension parts for the D413 1/10th 4WD buggy. Available for the front and the rear, the arms are moulded from a harder composite material for increased overall stiffness and thus improved handling on high-bite surfaces while also reducing the buggy’s sensitivity to changing traction conditions.

View the rear arms here

March 23, 2017

Losi Desert Buggy XL-E 1/5th scale electric RTR

Losi have introduced the Desert Buggy XL-E 1/5th scale 4WD electric RTR buggy. The all-wheel drive ready-to-run buggy builds on its nitro sibling but features a revised shock package with new O-ring and shock guides to provide improved feel, enhanced performance and upgraded tunability. The 4WD chassis is equipped with an aluminium centre differential for added strength and durability while new chassis brace plates add rigidity and stability. The Dynamite 800kv brushless power system with 8S Fuze brushless controller is good for speeds of up to 80km/h when on 8S power and the built-in Active Vehicle Control system and Spektrum DX2E transmitter keep things in control no matter how intense the action gets. The package is rounded out by MAXXIS Creepy Crawler tyres, a bright LED light bar and your choice of grey or black bodyshell designs.

View the features and more images here

March 23, 2017

Team Magic E5 series machined spur gear

HRC Distribution have introduced a machined spur gear for the Team Magic E5 series of trucks. Of a heavy duty design the part is especially useful when running high power brushless motors. The 46T gear is usable with the all E5-series trucks including the new E5 HX.

Source: HRC Distribution [hrcdistribution.com]

March 23, 2017

Exotek release new B6 & B64 option parts

Exotek have introduced a range of new option parts for the Team Associated B6 and B64 buggies. First up is an aluminium motor plate with POM spur gear cover for the B6. The vented 7075 motor plate for the 3-gear laydown gearbox is of a lightweight design for a lower centre of gravity with venting openings adding airflow and cooling. Included with the motor plate comes a machined POM spur gear cover that keeps the body from running and tearing up both the spur and body paint.

Continue reading here

March 22, 2017

Serpent SDX4 roll centre spacer & SDX8 servo arms

Serpent have introduced new optional parts for the SDX4 and SRX8 off-road buggies. Starting with the 1/10th scale part, the roll centre spacer for the SDX4 4WD buggy is machined from aluminium and it is 2mm thick, allowing to raise the gearbox and suspension mounts, resulting in improved traction and steering at the expense of a less easy driving feeling. The part is machined from aluminium, it comes anodised for wear and interlocks with the existing chassis slots. The spacer is usable separately or even as a sandwich of two for an even higher diff and arms position.

Continue reading here

March 22, 2017

JConcepts 8ight 4.0 front scoop

Made for the 4.0 series of TLR 8ight off-road buggies is JConcepts’ new front scoop. It serves as a front nose-cone on the vehicle but with a front wing design that has shown to produce enhanced steering characteristics. The front scoop can be painted, left clear or frosted for the desired look, fit and finish. Reports from the pit area revealed an increased feel and sensitivity in the larger sweeping sections and helped jumping attitude in the most difficult driving sections.

Source: JConcepts [jconcepts.net]

March 22, 2017

RPM Kraton & DEX8T front arm set

RPM have introduced an upper and lower front arm set for the ARRMA Kraton and Team Durango DEX8T trucks. Designed primary for strength and durability the arms offer a few extra features in as well. First is slop elimination. The A-arms reduce the amount of movement of the A-arm at the inner mounts, providing for better steering response and more consistent camber, caster and toe angle settings. Next improvement is the addition of a second shock mount hole further out on the arm, providing for a lower profile suspension set-up, allowing the shocks to lay down a little further, dropping the ride height for a lower center of gravity. As an added bonus, the front A-arms are roughly 10 percent lighter than stock while also being designed with leading and trailing 30 degree chamfered edges for smoother transitions over obstacles too tall for the suspension to clear. The arms fit the ARRMA Kraton, Talion and Outcast trucks as well as the Team Durango DEX8T and two sets are needed for a complete conversion.

View another image here