Team Associated have introduced the new 540-M3 12.0×5.0x24.2 Mod Rotor, Reedy’s latest tuning rotor designed for modified on- and off-road racers. Using the rotor will smooth out the low-end throttle inputs while maintaining strong mid-range power and top speeds. When competing on small and/or low-grip tracks the reduction in initial power delivery will help to provide more consistent lap times.
Source: Team Associated [teamassociated.com]
Coming from Team Associated are the SC10.3 Lucas Oil Brushless and JRT Brushless RTR short course trucks. Features include a water-resistant high-power Reedy brushless speed control, Reedy 3300kV brushless motor, and a water-resistant enclosed receiver box. The suspension received an upgrade with the addition of adjustable blue anodised aluminium V2 coil-over shocks while the gearbox now comes with a heavy-duty sealed gear differential and the externally adjustable V2 slipper clutch. The short-course hex-drive wheels come standard on the SC10.3 with high-traction racing compound rear tyres for more grip.
View the features and more images here
MIP have introduced the carbide diff rebuild kit for all TLR 22 series vehicles. This package includes tungsten carbide diff balls, diff rings, a 2-piece captured thrust assembly, machined aluminium T-nut, as well as a new spring and screw. The entire diff rebuild combo pack replaces all necessary diff components and it fits all 22 series buggies and trucks.
Source: MIP [miponline.com]
Kyosho’s Ultima RB6.6 1/10th 2WD electric buggy is soon also available as factory-assembled ReadySet ready-to-run kit. While the kit version of the RB 6.6 features four transmission setups, the Readyset version includes the 4-gear midship transmission with its more controllable feeling. As the basic configuration of the chassis and components are the same as in the kit version, the same wide setting options allow the chassis to be competitive on the race track straight out of the box. The all-important power train is equipped with a G15 15T brushed motor for controllable speed and exceptional drivability. The ReadySet includes nearly all items needed, except for batteries for buggy and transmitter. The set is rounded out though by a Syncro KT231+ 2.4GHz radio system and a powerful steering servo.
View the features and more images here
SWorkz have expanded their range of 1/8th scale pinion gears by 18T, 19T and 20T variants. The module 1 gears are precisely cut, they feature laser-engraved markings for easy identification and they are usable for all 1/8th vehicles with module 1 main gears.
Source: MW RC Cars [mwrccars.at]
T-Works have introduced their new twin motor starter box for 1/8th scale off-road and GT vehicles. Using a laser-engraved black aluminium case with adjustable rubber chassis stops the box makes use of dual 775-class motors that offer a high torque, ensuring easy starting even of factory new engines. A tough drivetrain helps with reliability and the box can be powered by dual NiMH or LiPo packs as well as a 12V lead-acid battery.
Tekno have introduced a complete line of Low Frequency springs for the SCT410.3 and EB48SL vehicles. The new design improves traction by reducing chassis oscillation on rough track surfaces and large jump landings. Better stability of the vehicle is achieved, providing more forward grip, increased corner speed and quicker lap times. The spring length has been reduced by 13mm in front and 15mm in the rear to allow for lower ride height adjustments which in turn increases corner speed under high traction conditions, such as carpet or astro-turf, where lower ride heights are essential. With additional coils as well as a larger wire diameter, the new LF springs feature a natural silver finish with a colour indicator for easy spring identification. They directly replace existing springs and are intended to be used on the SCT410, SCT410.3 and the EB48SL vehicles. The set includes two springs and available are five front and five rear sets.
Coming from VRP is an aluminium servo mount for the HB Racing E817 off-road buggy. The mount takes the place of the stock plastic mount, which can be sloppy and move under load from the servo. The VRP mount is CNC-cut from American grade 7075 aluminium, it comes black anodised and laser-etched, and it includes three aluminium servo mount posts to secure the mount to the chassis.
Source: VRP [visionracingproducts.com]
