Red RC » P Off Road

October 12, 2016

JConcepts B6 3-gear Honeycomb laydown motor plate

Coming from JConcepts is a honeycomb design laydown motor plate for the Team Associated B6 2WD buggy. Being of a lightweight yet rigid design the motor plates does away with bending issues often associated with flat surface plates as the 3D honeycomb design makes for improved rigidity in multiple directions. The honeycomb features also add a 3D look as they remain natural aluminium while the rest is available in blue or black anodised colours. Slight chamfering on the 3mm thickness material allows the rather beefy direct-replacement plate to look quite slim and trim.

View more images here

October 12, 2016

AKA Double Down 1/8th buggy tyre

AKA’s 2016 IFMAR World Championship winning Double Down tyre will soon become available for the public. Seen for the first time during last week’s worlds and designed to fit between the Impact and the Zipp in the AKA tyre line the tyre is best used when having a slightly dusty track and when better wear characteristics are needed. The pin size and spacing has been designed to give more room for dust to clear the tread pattern yet still have the pin density across the carcass to give it great wear characteristics. The Double Down will be available in standard soft and super soft compound as well as long wear medium and super soft variants including red inserts or as pre-mounts on white or yellow disc wheels.

Source: AKA [raceaka.com]

October 12, 2016

Serpent SRX2 optional A-arms & MH wing mounts

Serpent have introduced a range of new A-arms for the SRX2 buggy. First up are new hard-compound front arms. Almost flex-free yet very durable the arms are best used in very high-grip conditions such as carpet, astro turf and prepped clay. Next up are updated rear arms for the SRX2 and also the SRX4. The new design allows to run the shock absorbers both in the front and the rear of the arm. The wishbones are available as standard and hard variant as well as longer variant for improved track width and the use on lower grip track, again available as standard and hard compound variant. The long wishbones need to be run with the optional longer rear driveshafts. Last but not least come the new shorter MH type SRX2 wing mounts that are usable with setups that utilise rear dampers that are mounted in front of the rear A-arm.

View the other new parts here

October 12, 2016

Kyosho MT-4WD Psycho Kruiser VE 1/8th monster truck

Kyosho have introduced the MT-4WD Psycho Kruiser VE 1/8th scale ReadySet monster truck. The vehicles is based on a low-profile 4WD 3-differential chassis comparable to the popular Inferno truggy and it is equipped with a 1500kv Team Orion Neon 7 brushless motor and a 6S LiPo-compatible brushless controller. A shock-resistant, hardened battery case protects the LiPo battery while big bore threaded aluminium shock absorbers, aluminium shock towers and front and rear anti-roll bars keep the truck on track despite the extreme power it is able to develop. The included Syncro KT-201 2.4GHz radio system offers a fail-safe function for the unlikely event of signal loss and the included KS-203 steering servo was taken over from the 1/7th scale Scorpion XXL to ensure steering authority when the going gets tough. The ready-to-run truck is rounded out by an aerodynamic bodyshell and grippy tyres on multi-spoke rims.

content

October 11, 2016

Dragon-RC pre-mounted 1/8th truggy tyres

Coming from Dragon-RC is a pre-mounted set of tyres for 1/8th truggies. Offering a fine pin tread for great traction on most surfaces the tyres come as pairs, factory-assembled including white rims, foam inserts and they are ready for use.

Source: Dragon-RC [dragon-rc.com]

October 11, 2016

Avid release new B6-series titanium option parts

Avid have introduced a range of titanium option parts for the Team Associated B6 and B6D buggies. First up are titanium battery posts that are of a very minimalistic and lightweight design. Weighing in at only 1.2g per set the mounting hardware allows to lower the battery brace by 0.5mm for those slim packs and included in the set come two billet 6AI-4V titanium posts and a pair of 7075-T6 aluminium nuts.

Continue reading here

October 11, 2016

LRP Dynamic 8 2400kv brushless motor

LRP have introduced the 2400kv variant of their successful Dynamic 8 brushless motor. Closing the gap between the 2200kv and the 2600kv the 4-pole motor, winner of the Italian championships and runner-up at the 2016 EFRA Euros, offers a balance between power and run time and it features a machined alloy case with heatsink design, a precision-balanced sintered rotor and pre-soldered silver-plated heavy-duty connectors.

View the specifications and another image here

October 10, 2016

DMS 1/14th Trim2Tune foam tyre inserts

X-Factory UK have introduced the DMS Trim2Tune tyre inserts for 1/14th scale micro off-road cars. The idea behind the inserts was that micro racers were always requesting different width inserts to fine-tune the grip levels on their micro buggies to differing tracks. Unlike many other classes the ranges of inserts on offer were quite minimal, so options were greatly reduced. DMS’s open cell inserts come very specifically as 50mm wide as the most popular width in use is still 25mm and for those racers happy with this width, they can simply cut them straight down the middle. For those who wish to create their own width specific to their requirements, they can be trimmed with conventional scissors to any width desired. The inserts come as pair, allowing to cut at least four inserts from a pack and they are available in a soft, medium and firm variant.

View more images here