Red RC » P Off Road

September 14, 2016

Traxxas Bigfoot 1/10th 2WD RTR monster truck

Coming from Traxxas is the Bigfoot 1/10th scale 2WD ready-to-run monster truck. Named after the iconic Bigfoot full-scale monster truck the 1/10th scale variant captures the power and spirit of the original with its high ground clearance 2WD chassis, the officially licensed truck body – available in two colour variants – and authentic shaved monster truck tyres. The vehicle comes factory assembled and it features Traxxas’ proven Magnum 272 gearbox with slipper clutch, the suspension is equipped with oil-filled shock absorbers and the truck comes including a 12T 550-size brushed motor, the waterproof XL-5 speed controller and enclosed receiver compartment. Also included is the TQ 2.4GHz radio system, a Traxxas iD-equipped 7-cell NiMH battery pack and a 4-amp DC peak-detecting fast charger.

View more images here

September 14, 2016

Fastrace RC8B3 aluminium option parts

Italian company Fastrace have introduced a range of aluminium option parts for the Team Associated RC8B3 buggy. Available are a 6mm front and 4mm rear shock tower, an upper servo saver plate, a ball-raced centre differential plate for the nitro variant of the B3 as well as A, B, C and D suspension hangers. All parts are of a heavy-duty design for increased durability, they are machined from high-quality Ergal material and come with a hard-anodised surface for reduced wear and cool looks.

View the other new parts here

September 13, 2016

Spektrum SRS2100 DSMR micro race receiver

Spektrum have introduced the SRS2100 DSMR built-in antenna micro race receiver. Designed to eliminate the usual wire antenna and to offer a less cluttered electronic layout the receiver features an internal antenna that additionally improved the RF performance of the overall package. The receiver delivers a 5.5ms frame rate when coupled with Spektrum’s DSM2 or DSMR transmitters, it is of a 3-channel design and it offers extra protection of a waterproof Reliakote conformal coating that seals its electronics from the elements and other corrosives like nitro methane or motor spray. Measuring 17.6×25.5x25mm the high-voltage compatible receiver weighs in at 5.5g and it is available soon.

View the specifications and another image here

September 13, 2016

Exotek Flite V2 aluminium wing buttons

Exotek have introduced the Flite V2 aluminium wing buttons. Made from 6061 aluminium and coming in a range of colours the buttons are now of a lighter and sleeker design, ideal for both 1/10th buggies and touring cars. A large 16mm diameter securely holds the wing while offering a large surface area for protection from crashes. The buttons use 3mm countersunk screws and they are available as pairs in “Tamiya” light blue, “Associated” blue, “Team Durango” gold, “TLR” gun metal, “HB and Xray” orange as well as “Kyosho” red anodising.

Source: Exotek [exotekracing.com]

September 13, 2016

Team Associated FT turnbuckle wrench

Coming from Team Associated is the Factory Team turnbuckle wrench. It is designed for the use with 1/10th scale 3.2mm and 1/8th scale 5.5mm turnbuckles and its design allows for a long reach for tight areas while providing extra leverage. The tool is made of hard-anodised steel for wear and it is available now.

Source: Team Associated [teamassociated.com]

September 12, 2016

Tested RC 1/8th & 1/10th carbon fibre setup boards

Tested RC, the new brand of Ryan Lee, have introduced three new carbon fibre setup boards. The design with a Nomex honeycomb core and laminated outer carbon fibre plates makes for high precision, a completely flat surface and a very light weight, making these boards ideal especially for travelling and also weekly racing. The boards are available in three sizes, a large 455x570mm board that weighs in at 830g, a slightly smaller 475x380mm board weighing in at 830g an a small 425x310mm board weighing in at 630g. The latter is ideal for 1/10th touring cars with the larger ones are best suited for 1/8th buggies, truggies and on-road cars. All offer a low-profile 10mm height and they are available now.

Source: Tested RC Products [testedrc.co.kr]

September 12, 2016

STRC release new Axial aluminium option parts

ST Racing Concepts have introduced new aluminium option parts for a range of vehicles including the SMT10, Yeti, RR Bomber and the SCX10 II. First up are the aluminium lower suspension link reinforcement plates. Designed for the use with the SMT10, Yeti and RR10 Bomber, the CNC-machined aluminium upper and lower link plates offer improved durability and looks. The plates bolt right on through the existing holes of the nylon lower links and greatly increase the durability and rigidity of the suspension. They reduce flex in the lower suspension links, allowing the suspension to soak up the bumps and jumps properly. Each pack features four aluminium plates that are in the same shape and profile as the plastic lower links with light weight cut-outs and all the necessary hardware to install them and they are available in blue, black, green, gun metal, and silver.

Continue reading here

September 9, 2016

Beta aluminium rear wing buttons

Available soon from Nemo Racing are the Beta aluminum wing buttons. Made from aluminium and coming black anodized and with white laser-etched markings the buttons are usable for screw-type 1/8th off-road buggy and truck wing mounts and they help to improve wing fitment and mounting security over conventional plastic buttons.

Source: Nemo Racing [nemoracing.com]