Red RC » P Off Road

July 12, 2016

Yokomo Europe YZ-2 & YZ-4 stainless steel weights

Yokomo Europe have introduced new stainless steel balancing weights for the Yokomo YZ-2 and YZ-4 buggies. Made to add weight in the lowest possible position, the parts come in handy especially in high-grip and very bumpy conditions. Available are three different weights, as are a heavy 52g weight for the YZ-2CA/DT, a 26g variant for the YT-2CA/DT and YZ-4 as well as a 11g under motor weight for the YZ-2CA. The 52g and 26g weight can also be used together in the YZ-2CA/DT to end up with an even heavier car. All weights come laser-etched with some cool graphics for a professional look.

View more images here

July 12, 2016

Exotek D216 HD idler gear, Flite top gear & top shaft

Coming from Exotek and made for the HB Racing D216 are a HD idler gear, top gear and top shaft, all made of 7075 alloy. Starting with the idler gear, the part is machined from aircraft-grade aluminium and it improves durability when using high-power motors. The stronger material also prevents the gear from deforming, resulting in improved diff gear life compared to running the stock nylon part. Furthermore the gear is machined for lightness and it comes with smaller 5x10mm bearings for reduced mass.

Continue reading here

July 12, 2016

Arrowmax 7800mAh 2S LiHV battery pack

Arrowmax have introduced their new 7800mAh 2S LiHV standard-size battery pack. Build using high-performance 55C cells the high-voltage 7.6V LiPo pack comes in a protective hardcase with through-type 5mm tube connectors, 2mm balancer port and it sports split stickers to make sure the decals are not pulled off when removing any mounting tape. The battery is good for LiHV charging of up to 4.35V per cell but it is also usable with standard LiPo charging programs.

Source: Arrowmax [arrowmax-rc.com]

July 12, 2016

Tekno introduce new differential outdrives

Tekno have introduced new lightweight differential outdrives for their line of 1/8th scale vehicles. The outdrives, usable at the front and rear of the cars, feature a revised design and they are made using a different steel alloy material and new heat treatment process to extend life and improve consistency. The parts come in packs of two and they are compatible with all EB/NB48 and ET/NT48 vehicles.

Source: Tekno [teknorc.com]

July 11, 2016

Tesla 540-size brushless electric motors

Tesla 540-size brushless electric motor

Capricorn have introduced their new 540-size brushless motors for 1/10th and 1/12th scale applications. Coming with a lightweight can that sports cooling ribs and large vent openings, the hand-built motors feature a balanced rotor and ceramic ball bearings for maximum efficiency and performance. The motor is available as 3.5T to 8.5T modified, 4.0T and 13.5T modified as well as 13.5T, 17.5T and 21.5T stock variant. As for the two 13.5T offerings, the modified motor is making use of a 12.3x5mm rotor while the stock variant comes with a 12.5×7.2mm rotor.

View more images here

July 11, 2016

ZZRacing B6 series titanium screw sets

ZZRacing have introduced two titanium screw sets for the Team Associated B6 and B6D. Made from 304 titanium, the screws offer high durability, corrosion resistance and also a light weight with the B6-specific set weighing in at 30.1g while the B6D kit is slightly lighter at 28.6g. In addition to being light and robust the fasteners also add a certain bling to the car due to their silver finish.

Source: ZZRacing [zzracing.net]

July 8, 2016

MIP TLR 22 3.0 Pucks 17.5 drive system

MIP have introduced the Pucks 17.5 drive system for the TLR 22 3.0 buggy. Designed with stock racing in mind, MIP’s popular Pucks drive system is now also available for TLR’s latest 2WD competition buggy. The multi-piece construction is making it possible to keep the original axles as well as seeing superior wear that comes from a steel yoke. With that change MIP also have upgraded the diff balls to tungsten carbide balls for the ultimate in wear and efficiency. Overall, the race-proven design lightens up the drivetrain’s rotating mass by as much as 50 percent; which means quicker acceleration, less motor fade, and it allows to keep the car’s drivetrain fresh with replaceable Pucks.

Source: MIP [miponline.com]

July 8, 2016

T-Works introduce XB8’16 hardware sets

T-Works introduce XB8'16 hardware sets

Coming from T-Works and made for Xray’s XB8’16 1/8th off-road buggy are several new hardware sets. First up is a 64 titanium turnbuckle set including a total of six links and two suitable wrenches. The high-quality titanium turnbuckles replace the standard spring steel ones for lighter parts that also add some visual impact. Also new are two screw sets, one made of 64 titanium to scrub overall weight while the gold-plated steel screw set adds some bling to the buggy. Last but not least comes a 22-piece 7075-T6 hard-coated aluminium ball set. Included are various pivot balls to replace the standard steel parts for lighter items that scrub a good amount of weight.

View the other new parts here