Red RC » P Off Road

February 8, 2016

Flash Point pre-oiled air filters & .21 exhaust gaskets

Flash Point have new pre-oiled air filters for a range of off-road vehicles as well as .21 exhaust gaskets available. Starting with the air filters, they come in packs of four and in a specified Mugen or a general variant with the latter being usable with 8ight, RC8B3 and D815 vehicles. The 2-stage filters come pre-oiled and they allow for exceptional airflow and maximum engine protection. Also new are the high temperature .21 exhaust gaskets that can be used where the tuned pipe manifold attaches to the rear of the engine. The gasket is also good for tuned pipe exhaust systems to seal the connection between the pipe and the manifold.

View the other new parts here

February 8, 2016

Xray XB2 1.5mm Lexan rear wing

Coming from Xray and made for the XB2 2WD buggy is an extra strong rear wing made from genuine Lexan material. The thicker 1.5mm polycarbonate material makes for increased stability, durability and lifespan of the wing and it can also improve traction due to more efficient aerodynamics, but at the same time steering might be slightly reduced. The wing fits the XB2 and all buggies with comparable wing mounts.

Source: Xray [teamxray.com]

February 8, 2016

Exotek Exo22SCT aluminium & carbon chassis kit

Exotek have introduced the Exo22SCT aluminium and carbon fibre conversion kit for the TLR22SCT and SCT 2.0. With its simple and efficient layout, the chassis design offers improved rearward weight positioning of the battery and electronics to better suit a variety of track conditions while also allowing for the faster and easier to drive side ways mounted shorty battery positioning. The chassis set includes the machined and black anodised 2.5mm 7075 aluminium main chassis, 5mm carbon side rails and a redesigned battery mount that also acts as the top deck. The increased chassis footprint allows for more electronic layout options and proper weight balancing while maintaining a low centre of gravity. The conversion kit is available soon and it requires a TLR22SCT or SCT 2.0 truck in mid motor configuration.

Continue reading here

February 6, 2016

STRC Slash limited edition black alloy parts

ST Racing Concepts have expanded their range of exclusive limited edition black anodised Slash 2WD and 4×4 option parts. Available as a very limited production run are now also CNC-machined aluminium skid plates, steering bellcranks, hub carriers, A-arms and the motor mount.

View the other new parts here

February 5, 2016

Reds Racing Durabell clutch bell

Reds Racing have introduced the Durabell 1/8th off-road competition clutch bell. Made of high quality steel and sporting a special coating treatment the teeth last longer compared to standard clutch bells, making for greater consistency and reliability. A special vented design also guarantees lower temperatures and improved clutch shoe engagement for a longer life of both the bell and clutch shoes. The Durabell is available in 13 and 14 teeth version only and it is suitable for Kyosho, Mugen, JQ, Xray, Associated, Hot Bodies, Serpent, and Xray but it does not replace Reds Racing’s standard 13 and 14 teeth clutch bells.

Source: Reds Racing [reds-racing.com]

February 5, 2016

Xray XB2 Dirt Edition 2WD buggy – Coming soon

Coming soon from Xray is the XB2 Dirt Edition 1/10th scale 2WD electric buggy kit. Based off of the already available XB2 Carpet Edition the Dirt-specific kit was developed for lower traction tracks such as dirt and natural clay. Full details on the buggy along with proper production kit images will become available soon.

Source: Xray [teamxray.com]

February 5, 2016

Exotek TLR22 3.0 battery post & twist nut set

Exotek have introduced a battery post and twist nut set for the TLR22 3.0 buggy. The lightweight and secure design does away with the stock body clip system with the set including two machined aluminium posts, two knurled twist nuts as well as mini rubber O-rings that stop the twist nuts when tightened them down, to prevent the nuts from accidentally loosening.

View more images here

February 5, 2016

Kyosho Optima 4WD buggy re-release

Following a first teaser Kyosho have now officially introduced the Kyosho Optima 4WD buggy re-release. Redesigned by the original designer, the Optima has been carefully redeveloped from ground up to bring back the best of the buggies in the good old days and to offer a true fun to drive feel. The “2016” Optima is designed based on the original version released in the 1980’s, it features several updated areas without compromising parts compatibility with the original chassis. The upgrades and updates include 6061-T6 aluminium chassis material, the drivetrain can be build with the original chain or and optional belt drive, the diff gears are ball-raced, all gears are modern 48 pitch gears, and a slipper clutch allows the use of more powerful motors. The tyres offer a slightly modified tread and they are made using softer rubber and included in the kit is also all-hex hardware as well as two different front bumpers.

Continue reading here