During this week’s 2016 Beijing Hobby Show Serpent is displaying two forthcoming, electric-powered 1/8th scale RTR vehicles. Adding to the company’s impressive +30 cars line-up soon are the Cobra RTR E-Truggy and the Cobra RTR electric monster truck. More information on the 6S LiPo-compatible vehicles will become available in time for the release.
View the Cobra E-based monster truck here
Xtreme Racing have released a range of carbon fibre option parts for the Kyosho Optima re-release buggy in the form of a radio tray as well as front and rear shock towers. The radio tray is cut from 2mm carbon material and it replaces the standard fibreglass part with a better looking and more rigid solution. The plate matches the stock dimensions and it is a direct replacement. The front and rear shock towers are cut from 3mm material to replace the kit’s aluminium parts. The towers match the stock suspension geometry and they are available separately.
In addition to the Mini Pin 2 rear tyre, Schumacher now have also introduced the Mini Pin 2 4WD front variant. The version 2 front tyre was designed to match the super high grip Mini Pin 2 rear tyre which is popular on lower traction multi surface venues. The tyre offers maximum steering response and it is available as tyre only or pre-glued on Schumacher’s 12mm hex Flexlight wheel.
Source: Schumacher [racing-cars.com]
Following a first teaser image Exotek have now released full details on their all-new LCG gearbox set for the TLR 22 3.0 buggy. Centred around an aluminium gearbox with 3-gear setup the concersion let the three transmission gears operate in a straight line for an extra low centre of gravity and a smoother running idler gear. The diff case is machined from 7075 aluminium and the new motor plate is of a vented design to lower the motor temperatures. In addition to the lower centre of gravity the gearbox stiffens up the rear of the chassis as well as the shock tower for improved consistency on high-bite tracks. Using the gearbox requires to drill two extra holes into the chassis although the original gearbox can still be used, allowing for gearbox swaps if conditions call for it. Included in the set comes the black anodised and laser-etched gearbox, the alloy lightweight motor plate, a Delrin diff cover, carbon fibre battery strap with alloy hinge as well as alloy waterfall spacers, the chassis drill template, hardware and full instructions.
Coming from Schelle Racing Innovations are lightweight vented motor plates for the Team Associated B5M and the TLR 22 3.0. Cut from high-quality aluminium and coming in an anodised finish the motor plates offer minimised weight, increased airflow, and maximised rigidity. The unique vent slits are machined partial depth on the back side of the motor plate to create two tiny slits in the plate. These slits will keep air flowing through, and everything else outside and the plates are fully machined to keep them from warping under extreme stress and heat and they weight in at only 12.95g for the B5M and 13.8g for the TLR plate. They are available as B5M 3 or 4-gear variant in black or blue colour and as black or hard anodised finish version for the 3-gear TLR 22 3.0.
JConcepts have introduced a titanium front axle set for the TLR 22 3.0 2WD off-road buggy. Designed especially for the 3.0 the user-friendly and lightweight axles are of a single piece design, allowing the use of a traditional 4mm lock-nut instead of the stock screw type design originally used on the 22 platform. Titanium material lowers the weight, increases strength over aluminium and increases the bling factor by 10-fold. This design can easily be installed on the 22 3.0 buggy by using the existing hardware from the TLR kit.
Source: JConcepts [jconcept.net]
Ielasi Tuned have announced the soon release of three new nitro engines. The range will include a 7-port .21 buggy engine as well as two all-new on-road sport engines, a .21 5-port and a .12 3-port. The engines add to the already existing high-performance competition line and more information about features and specifications will become available shortly.
Source: Ielasi Tuned [ielasituned.com]
JConcepts have introduced the Fin titanium turnbuckle set for the TLR 8ight 4.0 nitro off-road buggy. The base of the six main suspension turnbuckles centers around a beefy 5mm square titanium base. The light-weight yet durable material is gradually machined down and tapers into a thread base design which accepts the rod ends featured in the kit. The unique JC set also features two additional turnbuckles, one for the throttle and one for the steering linkage.
Source: JConcepts [jconcepts.net]
