Filling a gap in the existing range of front anti-roll bars for the Xray XB8 buggy is the new 2.5mm diameter variant. Cut from high-quality, heat-treated spring steel wire and marked for easy identification the 2.5mm variant is the second hardest front swaybar wire in the range and ideal for the use on high-bite surfaces.
Source: Xray [teamxray.com]
Following the respective modified variants Team Corally have now introduced the Dynospeed 3.0 Spec racing brushless motors. They utilise a machined T6 aluminium can with airflow openings, high-purity copper windings, heavy-duty solder tabs and sintered neodymium magnets. An improved stator design makes for high efficiency and the motors also sport dual sensor ports, adjustable timing and they comply with IFMAR, EFRA, BRCA and ROAR rules. The Spec motors are available in the four stock specific variants of 10.5T, 13.5T, 17.5T and 21.5T.
View the features and another photo here
Round two of the Swiss 1/10th Electric Off-road Nationals was held at the HVBRS indoor track in Islikon. The qualifiers would be won by Nico Schmid in the 4WD class while Fabian Widmer grabbed the 2WD TQ honours. The 4WD A-mains then saw Patrick Hofer taking advantage of a mistake of Nico in A1 but the latter stroke back in A2 and A3 to take the overall win from Patrick Hofer and Romeo Grass in second and third respectively.
Continue reading the report here
Coming from Samix and made for Axial’s SCX-10 crawler are upper and lower titanium link sets. Machined from high-quality material and coming surface treated and laser-etched the parts not only add strength at a minimum of weight but they also make for some visual impact at the same time. The links are available as front upper, front lower, rear upper and rear lower sets with each containing two links and they are direct replacements for the stock parts.
Source: Samix [rcsamix.com]
Hobbywing’s long awaited XR10 Pro brushless speed controller is finally available to the public. The follow-up model of the successful Xerun V3.1 features an aluminium case and an efficient hear dissipating system for maximum cooling even in high ambient temperatures and in demanding racing conditions. Taken over from the V3.1 is the build-in on/off switch that keeps external wires to a minimum while offering a maximum of protection thanks to being completely waterproof, dustproof and shock resistant. Another feature is the switch mode BEC that allows to select standard 6V or high-voltage 7.4V output while delivering up to 4A of current for power-hungry servos. On the software side of things the XR10 Pro offers 10 pre-set programmes for 1/10th and 1/12th classes as well as on-road and off-road racing. Adjustable throttle and brake PWM frequencies allow for precise and accurate throttle and brake control for both modified and stock racing and on top of this Hobbywing’s top-of-the-foodchain 1/10th speedo also supports wireless programming, updating and data reading with the help of an optional WiFi module. For those who prefer a more standard programming, the controller utilises a separate programming and fan port as seen on the previous V3.1. The controller is available in a range of colours including black, orange and red to match with the car’s colour tone and it is available from now on.
View the features and more images here
Following first images of Motogo Seiki’s MSLowRider conversion for Tamiya’s TRF201XMW buggy, we now have new images available of the updated V2 variant that is being tested at the moment. The current car features a fully CNC-machined aluminium chassis to replace the standard alloy part with the Motogo Seiki chassis offering milled sections underneath the steering servo, electronics, LiPo battery pack and the motor in order to lower the centre of gravity and to allow the use of additional weights. The pockets also lower the motor position with the V2 motor plate placing the motor closer to the chassis from what is understood. Also part of the V2 chassis are incorporated side rails to do away with the kit’s composite parts. The buggy is currently in use by young Japanese driver Kouki Kato and we bring you more information on the conversion as soon as they surface.
Coming from X Factory’s Infinity range of option parts are the Wingbats wing reinforcement spacers for the Team Associated B5 and B5M. The little carbon fibre braces are available in two designs, one for the standard wing mount posts with body clips and one for the use with 3x8mm countersunk screws. Both are cut from high-quality carbon fibre with the countersunk variant also includes the necessary hardware. Wingbats for other popular buggies will become available soon.
Team Corally have introduced the Dynospeed 3.0 MODX sensored brushless motor series. Based around a T6 aluminium can the motors feature a high airflow design, high purity copper windings, heavy duty solder tabs as well as sintered Neodymium magnets. Other features include adjustable timing and dual sensor ports. The high performance competition motors comply with IFMAR, EFRA, BRCA and ROAR rules and they are available in 3.5T to 10.5T modified variants.
View the features and another image here
