November 5, 2015

TLR22 3.0 mid motor 2WD buggy kit

TLR22 3.0 mid motor 2WD buggy kit

With the TLR 22 3.0 Team Losi Racing have introduced the latest incarnation of the popular 22 1/10th 2WD buggy. The 3.0 has been designed to give racers a versatile platform that easily adapts to changing track conditions without requiring a lot tuning changes. First up is the all-new 3-gear transmission with revised motor location that places the motor 12mm closer to the diff gear to increases the rear weight bias, providing better rear grip on exit, more entry steering and a buggy that, overall, is easier to drive. The new layout also decreases chassis roll, greatly improving the vehicle’s stability, consistency and braking. A 4-gear transmission is available separately for lower-grip tracks and different driving styles.

Continue reading here


November 5, 2015

Flash Point 6000mAh 4S LiPo battery pack

Flash Point 6000mAh 4S LiPo battery pack

Flash Point R/C have introduced their new 6000mAh 4S LiPo battery pack. Build using high-performance 90C cells the hardcase battery target racers and bashers alike and its standard 138×46.5×45.5mm dimensions makes it usable for all 1/8th vehicles that use brick-type battery packs. The pack weighs in at 600g, it comes pre-wired with an industry standard balancer connector but no power connector, allowing to use your choice of battery/ESC plug.

Source: Flash Point [flashpointrc.com]


November 4, 2015

Dark Matter Coldback super cooling fans

Dark Matter Coldback super cooling fans

Dark Matter have introduced their new Coldback super cooling fans. Available in the industry standard sizes of 25mm, 30mm and 40mm the precision-moulded fans are made from premium nylon material and they utilise dual ball bearings to ensure ultra smooth, fast and silent performance. Usable with 6V to 8.4V input the 30mm fan rotates with up to 24,200RPM while the larger 40mm offers up to 15,500RPM. Included come ultra flexible silicone extension wire.

Source: Dark Matter [darkmatterproducts.net]


November 4, 2015

Exotek Flite 48dp spur gears

Exotek Flite 48dp spur gears

Coming from Exotek and made for their slipper eliminator hubs are the Flite 48dp spur gears. Machined from high-quality POM material to ensure true roundness the extra interior machining does away with unnecessary weight for reduced rotating mass. The gears are meant to be much stiffer and truer than moulded nylon spur gears, they are available as 66T, 69T, 75T and 78T and they weigh between 2.5g and 4.6g each.

View more photos here


November 4, 2015

Flash Point All-Purpose Cleaner

Flash Point All-Purpose Cleaner

Flash Point’s new All-Purpose Cleaner was specially formulated for all R/C vehicles as it removes grease, oil, exhaust residue, and dirt. The cleaner is simply sprayed on the desired area and then whipped away with a brush or a towel and then blown off with an air compressor. It can be used to clean and degrease plastic, rubber, aluminium, steel, lexan, vinyl, and just about any other material and it is also safe on the materials at the same time. The chemical can also be used on cars, planes, motorcycles, boats, bicycles, and much more.

Source: Flash Point [flashpointrc.com]


November 3, 2015

PR Racing SB401 aluminium rear hubs

PR Racing SB401 aluminium rear hubs

PR Racing have a new option part for the SB401 4WD buggy available in the form of aluminium rear hubs. The lightweight CNC-machined hubs provide strength where it’s needed while offering new optional camber link holes to allow for more roll centre adjustability.

Source: Hobby Pro USA [hobbyprousa.com]


November 3, 2015

LRP introduces Antix brand

LRP introduces Antix brand

LRP have introduced their new cost oriented Antix brand. First products up for grabs will be a line of high-quality LiPo hardcase battery packs built from 45C cells. Available will be two 2S packs with 4800mAh and 5000mAh capacity, two 3S packs of 4300mAh and 5600mAh as well as a 4S 5400mAh pack. All come pre-wired with US-style connectors and LRP promises a high quality standard for all products but a budget price tag to make the products attractive for average modellers without compromising performance and durability.

Source: LRP [lrp.cc]


November 3, 2015

Mugen Seiki anti-slip pit mat

Mugen Seiki anti-slip pit mat

Mugen Seiki have a new anti-slip pit mat available. Cut to a large 60x120cm dimension the mat offers plenty of working space while keeping the pit table clean. The special structure and anti-slip material prevents small parts and tool to rolling off the table while being lightweight and easy to clean at the same time. Available in black and blue colour the mat features the Mugen Seiki logo on the bottom right hand corner for looks and to ensure everyone is aware of your passion to everything Mugen.

View the black colour mat here


Tonisport
Mibosport
LC Racing
VP Racing
T-Works