Red RC » P Off Road

June 30, 2015

T-Works XB4’15 floating servo mount

T-Works XB4'15 floating servo mount

T-Works have a new floating steering servo mount for the Xray XB4’15 buggy available. Doing away with the need to run the standard parts that connect the servo with both the chassis and the side pod the mount makes for a more equal left-to-right chassis flex as it utilises the “floating”, centre-mounted design most of today’s touring cars use. Included in the set comes an aluminium centre mount, an outer aluminium post and a sturdy carbon fibre upper plate.

Click here to view more photos

June 29, 2015

JConcepts Ruptures 2.2″ crawler tyres

JConcepts Ruptures 2.2" crawler tyres

New from JConcepts comes the Ruptures 2.2″ crawler tyre for vehicles such as the Axial Yeti. The extremely tacky yet versatile tyre offers a layout of individual “large islands” that react to directional and forward loading characteristics like a soft gummy candy. The long horizontal attack bars are connected with solid sidewall detail which braces the sidewall for the high impact situations. The centre “mini islands” help maintain spinning speed and at half height provide some space to sling clean during those dirtier runs. The entire top level of tread has built-in cuts and recesses which provide a sharp edge. A sidewall radial rib connected with a dual position arrow help maintain stability and help the driver squeak out of a tough situation. The carcass itself is extremely pliable which conforms to the vast majority of obstacles. Inside the carcass, the tyre features a connected “Y” loop ribbing design which blends carefully into the sidewall. The bracing supports the lower half of the tire while maintaining the upper flex characteristics. The 154mm tall tyres include a soft open cell foam insert capable of standing up the super soft compound but flexible enough for sharp terrain.

Source: JConcepts [jconcepts.net]

June 29, 2015

Shepherd Premium Thrust Bearing Grease

Shepherd have announced the expansion of their range of lubricants with another product, the Premium Thrust Bearing Grease. The mineral oil based, water resistant and rust inhibiting lubricant can be used under high temperatures while thanks to its good mechanical stability only a small amount of grease is needed to extend the life and reduce the wear of any thrust bearing. The lubricant comes in a handy 6g container with a sticker on the lid for easy identification.

Source: Shepherd [team-shepherd.com]

June 28, 2015

STRC Yeti blue anodised aluminium parts

ST Racing Concepts now have a range of Axial Yeti aluminium option parts available in blue anodising. The series includes a HD front shock tower, steering knuckles, C-hubs, steering brace and a HD diff cover all of which come in a blue colour and with laser-etched markings. All parts are direct replacements for the stock items and they not only look the part but also improve durability and performance.

Source: STRC [teamstrc.com]

June 27, 2015

MIP B5M Eco All-in-1 box set

MIP’s Box gearbox for the Team Associated B5M has received a running change in the form of the MIP Eco All-In-1 Box that accommodates all current Team Associated and MIP topshafts on the market for the B5M and T5M platforms. Generally the gearbox bridges a gap and gives the mid motor vehicle all the benefits of the rear motor car but less drag and more initial punch with one less idler gear. The all-aluminium construct offers an advantage pertaining to more precise internal gear mesh, less overall heat, and stiffer bracing, better bearing seats and over 10 percent of the gear box weight reduced from the original box.

Click here to view the features

June 26, 2015

JConcepts Axial Yeti Vengeance 2.2″ wheels

JConcepts Axial Yeti Vengeance 2.2

Coming from JConcepts and made for the Axial Yeti equipped with 2.2″ tyres are the new 2.2″ Axial Yeti 12mm glue-on wheels. The 8-spoke 1-piece wheel is a smooth design, incorporating a triangle type cut-out of spokes around the centre for heavy street appeal. The design leaves the natural colour of the wheel showing inside the spokes which adds a touch of mystery and depth. In-between the spoke design rests the dividing sections which break up the pattern adding a bit of bite to the overall design. The entire face of the wheel has been plated with a silver coating which gives the Yeti owner a little more luxurious look to match-up to a variety of imaginary looks. Each package contains four wheels, 12mm plastic hexes, wheel adaptors to give the user a front and rear wheel offset and hardware to make the installation complete. The adaptors attach with the included eight, 2.5x8mm screws to provide beefy security. In addition, each wheel includes a solid and open centre cap which are attached with the included eight, 2.5x6mm socket head cap screws.

Click here to view more photos

June 26, 2015

Pro-Line Jeep Comanche full bed rock crawler body

Pro-Line have introduced the Jeep Comanche full bed 12.3″ rock crawler body for 1/10th scale and crawler rigs with 12.3″ wheelbase. This body is constructed out of a single piece of high-quality Lexan, doing away with the need of handling multiple body pieces. Included comes a comprehensive decal sheet containing grille and light details among others.

Click here to view more photos

June 26, 2015

Bittydesign Zefirus 1/8th off-road Lexan wing

Designed in cooperation with Italian and UK top drivers is Bittydesign’s new Zefirus Lexan rear wing for 1/8th off-road buggies and trucks. Light of weight thanks to its design and the polycarbonate material used, the wing helps to lower the car’s centre of gravity without compromising aerodynamics. The design of the wing allows to fine-tune the downforce created by adding or modifying the included gurney flap and by using or leaving away the optional side dams. By opening airflow vents the wing is further tuneable and in its lightest configuration 50 percent lighter than a standard plastic wing. Made in Italy and coming made from clear and high-quality Lexan material the wing set includes the gurney flap, side dams, mounting hardware, and a decal sheet. Furthermore the wing is also available pre-painted in black, white and fluorescent yellow.

Click here to view more photos