Red RC » P Off Road

September 3, 2015

Ielasi Tuned IDT.21-4CQ buggy engine

Ielasi Tuned have introduced the IDT.21-4CQ 4-port “square” engine. The company’s most powerful off-road engine so far is designed to offer great power at both low and high RPM while the 4-port setup makes for a linear power output and low fuel consumption. The engine comes with a R7 conrod which is machined from light aluminium and ultrasonic-checked for improved reliability. Other features include a selected and matched piston/liner assembly for best possible compression and durability while the carburettor used is a reverse-type Novarossi offering to provide high idle stability, precise tuning and higher mid to top range power. The package is rounded out by a new cooling head with etched Ielasi Tuned logo.

View the specifications here

September 3, 2015

EXC AMP 1/10th monster truck & desert buggy

Horizon Hobby have introduced the new ECX AMP line of 1/10th 2WD ready-to-run off-road cars. Coming as monster truck and desert buggy both vehicles offer a tough construction as well as waterproofing, making them the ideal for all-weather bashing and as beginner’s cars. Building on a tough nylon composite chassis the cars feature oil-filled shock absorbers, a 2WD transmission with gear differential, captured hinge pins as well as a 540-size 20T brushed motor and a full-range 2.4GHz transmitter. The package is rounded out by a 7.2V NiMH battery and a Dynamite wall charger. Both the buggy and the truck are available in two different bodyshell designs.

View the features and more photos here

September 2, 2015

Avid RC8B3 5mm carbon fibre shock towers

Coming from Avid and made for the Team Associated RC8B3 buggy are Avid’s carbon fibre shock towers. Machined from high-quality 5mm material the towers scrub 33 percent of weight compared to the stock aluminium parts while the rear tower also places the rear wing 1mm further back. Being a direct replacement the Avid shock stays maintain the stock suspension geometry. The parts are available separately or as a set including the front and rear tower.

Source: Avid [avidrc.com]

September 2, 2015

JConcepts Finnisher 8ight-T 3.0 bodyshell

The latest off-road vehicle to receive JConcepts’ Finnisher body treatment is the TLR 8ight-T 3.0 1/8th scale truggy. The slight cab forward design, raked windshield and aggressive stance highlight a performance-oriented core while the wide front hood scoop allows plenty of clearance for the unique 8ight-T 3.0 shock geometry. An extended front chin spoiler, headlight and grill protect the front-end from unwanted up-drafts during flight while a built-in air escape passage on the roof allows the customer to fine-tune the body for maximum outdoor performance. The new body includes champion rear name plates which provide additional high-speed stability and the overall handling has been improved by balancing the bias between the cab location and rear wing placement which control the majority of the aero affects of the aggressively styled body.

View more photos here

September 2, 2015

Serpent Spyder SRX4 1/10th 4WD buggy kit

Serpent’s Spyder SRX4 1/10th 4WD was first seen in prototype stages a while ago and the kit is finally available for the public. The buggy, that was steered to the runner-up spot at the 2015 EFRA Euros, is based on a 2.5mm carbon fibre chassis and it features a dual-belt drivetrain with fluid-filled gear differentials, a 3-pad slipper clutch, front clicker unit and a 3mm aluminium motor mount. The front part of the drivetrain is housed in a central spline that also makes for a strong chassis backbone. The car is designed to use saddle pack batteries, it utilises a low profile steering servo and it comes with 4mm carbon fibre shock towers, big bore shock absorbers and the kit is rounded out by a mid-cab design bodyshell, high downforce wing and a set of white disc rims.

View the features and more photos here

September 2, 2015

VP-Pro 1/8th off-road Lexan wing

VP-Pro have introduced a polycarbonate rear wing for 1/8th off-road vehicles. Made from 1.5mm Lexan material the wing offers a very low weight and a high durability. The design allows to fine-tune the downforce and drag created by the wing by adding or modifying the included gurney flap and by adding or leaving away the optional side dams.

Source: VP-Pro [vp-racing.com]

September 1, 2015

TLR 8ight Electric Clutch System

Coming from Team Losi Racing and made for the 8ight-E line of 1/8th scale electric buggies and trucks is the electric clutch system. It converts electric 1/8th scale buggies and trucks to a nitro-style clutch system, providing smoother throttle response, especially on bumpy tracks. The clutch provides instant power while increasing traction and decreasing the load on the drivetrain while the slip system of the clutch allows improved throttle modulation on bumpy tracks as it will slip under a heavy or abrupt load allowing the vehicle to remain stable. The clutch system also allows for full brake usage without the need for mechanical brakes due to the preloaded clutch shoes. The set includes two alloy and two composite clutch shoes, three different spring sets but not clutch bell and it is a direct fit on the 8ight-E 2.0, 8ight-E 3.0 and 8ight-E T 3.0.

Source: TLR [tlracing.com]

August 31, 2015

Arrowmax 7800mAh 2S LiPo hardcase battery pack

Arrowmax have a new high-performance battery available in the form of the 7800mAh 2S LiPo pack. Built using high-capacity 55C/110C cells the battery comes in handy for all power hungry applications such as 1/10th touring cars as well as 1/8th E-buggies. The protective hardcase features standard 4mm bullet-type connector tubes which are accessible from both the top and bottom side and it is of standard 2S dimensions.

Click here to view another photo