Red RC » P Off Road

April 1, 2015

Tekno EB48SL 1/8th ‘Super Light’ Buggy Kit

Tekno EB48SL 1/8th 'Super Light' Buggy Kit

Tekno introduce the new EB48SL Super Light 1/8th scale racing buggy kit. Based on the SCT410.3 1/10th scale short course truck the buggy is a lightweight alternative to the somewhat heavy standard 1/8th buggies and ideal for tight and twisty indoor tracks. The buggy shares around 95 percent of parts with the SCT410.3 with all of the new improvements and features put into the truck are all present in the buggy, along with a couple others specifically for the 1/8th kit. Lightened differentials, a lightened driveline, and lightened aluminium parts are standard and used throughout. 16mm bore, aluminium threaded body, long travel shocks are standard and the updated SCT410.3 suspension geometry is standard as are a split centre diff mount and the lightened chassis. The buggy is designed for the use with Pro4 motors, brushless speed controllers and 2S LiPo battery packs to make for a much lower weight compared to its heavy 4S siblings and thus improved acceleration, corner speed and jump handling.

Click here to view more photos

March 31, 2015

Insane Carpet Fighter 1/10th SC tyres & foam inserts

Insane-RC Carpet Fighter 1/10th SC tyres & foam inserts

Russian company Insane-RC introduce the new Carpet Fighter 1/10th scale short course truck tyres and a line of foam inserts. Starting with the tyre, it is developed for high-grip indoor carpet racing and it sports specially designed inner ribs for improved carcass stiffness which makes for much better stability especially in high-speed corners as the ribs minimise the gab between the tyre and the wheel. The tyres are made in Russia from 100 percent natural rubber which is meant to stay consistent even in freezing weather conditions which can be important when racing on outdoor carpet or astroturf tracks. Also new are foam inserts for all Carpet Fighter tyres. Available in three different hardness of standard, hard and super hard the cut inserts are ideal for carpet racing.

Click here to view more photos

March 28, 2015

MIP 5ive-T Real Brakes Kit

Introducing a system that looks and works much like disk brakes on motorcycles, bikes, and large cars, MIP’s all new Real Brakes are here for the Losi 5ive-T. Consisting of proper and replaceable brake pads for stopping power and a disk rotor that is sure to last the life of the car, this system is sure to stop Losi’s large scale truck on a dime. With the updated brakes adjusting the pitch of the car in the air is a synch and as the car reacts in the air the brake rotor will not get cocked forward or backward due to special brake guide. This system has been tested for months by MIP’s product development team and is attributed with the 2014 West Coast Nationals Win and 2015 Nitro Challenge wins.

Click here to view the features and another photo

March 27, 2015

JConcepts green compound Smoothies slick tyres

JConcept’s Smoothies 1/10th buggy slick tyres are now also available in green compound in addition to the already released gold compound tyres. Released as a 60mm bead mounting diameter, the tyres mount straight to the latest generation wheels. The carefully profiled tyre carcass rolls through the turns with efficiency while the maximum smooth surface area grips the speciality surfaces. The tyres include Dirt-Tech 60mm inserts and they are available as 2WD buggy front and 2WD/4WD rear tyre.

Click here to view the rear tyre

March 27, 2015

Exotek DEX210 RM HRC bulkhead conversion

New from Exotek comes the rear motor 7075 aluminium bulkhead conversion for rear motored DEX210 series cars including the v1, v2 and ST. Co-designed with the Team Durango race factory and produced by Exotek the new concept rear motor bulkhead was used by Jörn Neumann to win the 2014 Euro Championships. Made of high-strength 7075 alloy and machined down to reduce overall weight, the new RM bulkhead provides lower inner camber link mounting points for improved high roll centre options as well as chassis mounted alloy inner ball stud mounting. The construction also re-locates the shock tower to be in front of the rear shocks and it changes the flex characteristics of the chassis and gearbox. On top of that the design makes for easier gear box access and removal and the wing can be mounted more forward or in the rear stock gearbox location. The set is available in factory gold or black anodising and it is recommended for experienced modellers as it requires hand cutting of the stock plastic gearbox.

Click here to view more photos

March 26, 2015

Exotek DEX210v2 carbon rear shock tower

New from Exotek and made for the Team Durango DEX210v2 is a rear carbon fibre shock tower. Offering a heavy duty design and a stealthy matte finish the tower, made from 5mm thick material, is much stiffer and stronger that the stock part for consistent damper action while being still light of weight due to its extra machining. Also the wide open shape allows air to pass through for better wing aero. The shock tower weighs in at 12.5g and fits the original DEX210 as well.

Click here to view another photo

March 26, 2015

Team C TC02C Evo rear bulkhead & alloy servo washers

Team C Racing introduce an aluminium rear shock tower mount for the TC02C Evo buggy as well as aluminium servo washers for general usage. Starting with the rear shock tower mount, the part is CNC-machined from aluminium and it replaces the standard composite part for a more durable one. The part offers improved support for the shock tower and it prevents the camber link ball studs from becoming ripped-out on impacts. The bulkhead sports mounting positions for the rear swaybar and it comes orange anodised to match the remainder of the car’s alloy options. Also new are 4.3mm aluminium servo washers whose design allows them to interlock with the servo’s mounting lashes to ensure a rock-solid installation as the servo cannot move in any direction even in harsh racing situations. The aluminium washers come orange anodised, in sets of four and they fit most standard-size and low-profile servos.

Click here to view the servo washers

March 25, 2015

JConcepts Mono & Bullet disc wheels

JConcepts introduce the new Mono wheels for the front of the TLR 22-4 buggy as well as the Bullet 4.0″ 1/8th truck wheels. Starting with the 1/10th wheels, they are designed in the popular dish style and available in bright white and fluorescent yellow. They offer the maximum size allowed under ROAR rules and make a statement with their large appearance, flat dish shape and inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. The wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.

Click here to continue reading