Red RC » P Off Road

September 2, 2014

Kyosho MP9 short wing stay

Kyosho’s 1/8th scale wizard Yuichi Kanai has released first information on the forthcoming short wing mount for the MP9 buggy. Thanks to two different wing mounting plates the wing mount allows to use three mounting positions; standard kit, standard kit height but 9mm more forward as well as third position 9mm more forward and 5mm lower than standard. The height and position of the wing has direct influence on the rear traction available and is a fine tuning tool to adapt the buggy’s jumping characteristics also.

Click here to view another photo

September 2, 2014

Vampire Racing 2S LiFe receiver battery packs

Vampire Racing’s popular Lithium-Ferrite receiver battery packs are now available in a 2014 edition. Coming in industry standard “straight” or “hump” pack dimensions the 2S packs with a voltage of 6.6V allow the direct use with standard voltage receivers and servos without the need for a voltage regulator as 7.4V LiPo packs do. The straight pack makes use of 1600mAh cells while the hump pack comes built from high capacity 1900mAh cells. Both packs are pre-wired with XH balancer connectors and a JR/Futaba compatible universal plug.

Click here to view the other new battery

September 2, 2014

Kyosho 1/10th Mad Bug VE ReadySet

Coming soon from Kyosho is the 1/10th scale Mad Bug VE ReadySet off-road buggy. The shaft driven 4WD vehicle can handle just about any type of rough terrain thanks to its large 100mm diameter tyres on inch up wheels and the aluminium oil shocks. The bathtub chassis is equipped with a heavy-duty suspension, slipper clutch and metal diff gears in the high durability drive train that can take plenty of punishment from hard driving. Included with the factory assembled kit comes a genuine Team Orion Neon One 2400kv brushless motor, a Team Orion R10 One speed controller and a waterproof high torque steering servo. The set is rounded out by a 1800mAh NiMH battery pack, a wall charger and your choice of a blue or white bodyshell.

Click here to view the feature and more photos

September 2, 2014

Yeah Racing Tritronic 60A brushed speed controller

Along with the release of their Hackmoto V2 brushed motors Yeah Racing also introduce a suitable speed controller in the form of the Tritronic 60A ESC. Made for 1/10th scale applications with 2S to 3S LiPo packs or 5 to 9 cell NiMH batteries the speed controller features dust and water protection, a 5V/2A BEC system, and three running modes including FWD/Brake and FWD/Brake/Reverse. With its 60A rating the speedo allows to run brushed motors down to 12T with a 2S LiPo pack and it will become available separately or as a combo set including a Hackmoto V2 brushed motor.

Source: Yeah Racing [yeahracing.com]

September 1, 2014

Yeah Racing Hackmoto V2 540-size brushed motor

Yeah Racing Hackmoto V2 540-size brushed motors

Yeah Racing introduce the new Hackmotor V2 540-size brushed motors for all die-hard “vintage” technology fans. Coming in several winding options, such as as a mild modified 13T and a spec racing 23T variant, there are also three very high turn 35T, 45T and 55T motors available. All feature black cans with high-strength magnets, vented motor heads with large solder tabs and cooling towers for the brushes as well as dual ball bearings. The motors are fully rebuildable and available now.

Source: Yeah Racing [yeahracing.com]

August 29, 2014

JQ Products THEeCar steel centre dogbones

New from JQ Products come steel centre dogbones for THEeCar 1/8th E-buggy. Made to replace the standard aluminium dogbones, the parts offer improved durability when running extreme power setups or on tracks with very high traction and/or large jumps. The driveshafts are a lot less prone to bend under heavy loads and available now.

Click here to view the rear dogbone

August 29, 2014

Arrma Kraton 6S BLX speed monster truck

The Kraton 6S BLX speed monster truck is Arrma’s second 1/8th scale kit following the introduction of the Typhon 6S BLX buggy. The truck builds on a black anodised aluminium chassis plate and features a heavy duty 3-diff drivetrain, long suspension components, aluminium big bore shock absorbers and front and rear anti-roll bars from stock. Universal driveshafts transfer the power of the 6S compatible sensorless brushless motor to the multi-spoke rims with dBoots MT tyres. All electronic components such as the high-torque steering servo and the 180A speed controller are full waterproof while being protected by an inner roll cage at the same time. The truck comes ready-to-run including a 2.4GHz radio system and a pre-decorated bodyshell with a green/carbon or blue livery.

Click here to view more photos

August 29, 2014

LRP NiMH receiver & 1/18th micro batteries

LRP have new receiver and 1/18th micro battery packs available. Starting with the receiver packs, the XTEC 2/3A NiMH batteries are available in straight or hump configuration and with your choice of JR/universal or BEC compatible plugs. The 5-cell packs are built using high capacity 1600mAh cells and are usable for on-road and off-road applications alike.

Click here to continue reading