December 6, 2011

Sonic Nitro Engines V.12T 2.1cc TC engine

Sonic Nitro Engines V.12T 2.1cc TC engine

Sonic Nitro Engines have released details on their V.12T 2.1cc touring car engine. All components have been made from the finest materials to ensure high durability and reliability. Equipped with a 3 ports sleeve with ‘teardrop’ work and a CNC machined flat piston, the engine provides great power over the entire RPM range while having a very efficient fuel consumption. The 12mm turbo crankshaft is filled with a silicone insert to reduce the inertia and improve the fuel flow while the special back plate, the optimized crankcase and the the ‘knife edged’ aerodynamic connecting rod help even more to reduce turbulence inside the engine. A special turbo combustion chamber with a cooling fin and the super lightweight cooling head ensure best heat dispersion to keep the engine temperature at a moderate level. High quality Swiss ball bearings, a modern composite valve carburetor and a 5,4mm aluminium venturi complete this new high competition engine. All Sonic engines will be available from next week on.

View more images and details here


December 6, 2011

Serpent S411 2mm flex top-deck

Serpent S411 2mm flex top-deck

New from Serpent for the S411 is this 2mm carbon fibre top-deck, which features a new design to allow for more flex on the tracks where this is needed. This new top deck is in addition to the already available 2.5mm and 2.0mm standard configuration top decks as well as the 2.5mm, 2.25mm and 2.0mm chassis plates, allowing you to extensively experiment with chassis torsion.

Source: Serpent [serpent.com]


December 6, 2011

Max Power RP3.5 Racing Edition .12 engine

Max Power RP3 Racing Edition .12 engine

Max Power have released their new .12 competition engine called the RP3.5 Racing Edition. This new engine has a different stroke, a 3 port sleeve, machined piston, hand tuned lightened crankshaft, sealed combustion chamber and new for 2012 cooling head. Available from December onwards.

View the engine internals here


December 5, 2011

Capricorn Lab C02 now available

Capricorn Lab C02 now available

More news from Capricorn with the announcement that their Lab C02 1/10th scale 200mm chassis kit is now available. We have written about the car in the past, but up until now it was only available as an upgrade kit for the C01 car. The Italian company also released photos of the completed car, which you more of below.

View more images here


December 4, 2011

CRC 1S 4200mAh 65C Shorty pack

CRC 1S 4200mAh 65C Shorty pack

CRC have released their new battery for 1S racing, the 1S 4200mAh 65C Shorty. This new pack is built for the new CRC Gen-Xi and gives plenty of runtime and power for spec racing in 17.5 and 13.5 turn. Also, great for 4 minute oval racing, the small sizes allows multiple battery positions. Dimensions are 69x47x18.5mm it is ROAR legal and no effected by ROAR’s new short battery rule.

Source: CRC [teamcrc.com]


December 3, 2011

Mugen Pro Starter B3 starter boxes

Mugen Pro Starter B3

Mugen have made some running changes to their line of on road and buggy starter boxes, the Pro Starter B3. The new boxes now feature a new handle which places the glow connector at an angle for easy access and to prevent it interfering with the bottom of the car. The boxes can now also readily accept LiPo packs.

View more images of the B3 here


December 2, 2011

Motonica P81 RS2 on road chassis

Motonica P81 RS2 on road chassis

Motonica have released the P81 RS2, the next evolution of their 1/8th scale on road chassis. Based off the racing experience gained this year, Motonica takes a further step forward to improve upon the already top performance of their race winning chassis. The new version retains the features already developed in the previous version, keeping the technical features and all the components of the RS version untouched. The most important innovation of the RS2 is the new front hub set that allows the adjustment of the King Pin angle, which can have a considerable effect on the cars performance.

View more details and images here


December 2, 2011

Sonic V.21T 3.5cc on-road engine

Sonic V.21T 3.5cc on-road engine

In a few days Sonic Nitro Engines will release the all new Sonic V.21T 3.5cc on-road engine which is produced by Picco Micromotori and all components have been made from the finest materials to ensure high durability and reliability. Equipped with a 7+2 ports sleeve with ‘teardrop work’ and a CNC machined flat piston, the engine provides great power over the entire RPM range while having a very efficient fuel consumption. The 14mm turbo crankshaft is equipped with two high density weights to improve the overall balancing and filled with a silicone insert to reduce the inertia and improve the fuel flow. The special back plate, the optimized crankcase and the “knife edged” aerodynamic connecting rod help even more to reduce turbulence inside the engine. A special turbo combustion chamber with a cooling fin and the super lightweight cooling head ensure best heat dispersion to keep the engine temperature at a moderate level. High quality Swiss ball bearings, a modern composite valve carburetor and two aluminium venturis (8mm + 9mm) complete this new high competition engine.

View more details and images here