Red RC » P On Road

February 17, 2023

Xray X4F Alu Flex Chassis 2.0mm

Xray has released a new optional aluminium 2.0mm Flex Chassis for its X4F 1:10 FWD Electric Touring Car. The chassis is recommended for high traction carpet tracks, making the car easier to drive and more stable in high traction condition and avoiding traction roll. Made from 7075 T6 aluminium, it features special cut outs for optimal flex characteristics. The ultra-narrow chassis is only 84mm wide and features special cut outs that provide the chassis flex characteristics suitable for a wide variety of the traction levels. The bottom of the chassis is shaped to reduce contact between the chassis and the ground while turning to improve cornering speed.

Source: Xray [teamxray.com]

February 16, 2023

Maclan DRK 160 RS Edition Drag Race ESC

Maclan Racing has released their new DRK 160 RS Edition ESC intended for the Drag Racing’s NPRC Real Street Class. The speed controller features proprietary 7-Stage launch power control software with all new profiles designed for NPRC Real Street Class. It comes with factory pre-soldered 10AWG wires with DRK Super Capacitor module and is a Fanless design with no need to install the cooling fan. In terms of programming options you can use a ProLink programming card, a Windows PC and Maclan Panel Software (with cable included in the ESC), Use an Android mobile device (5.0 OS or higher) and Maclan Smart Link App (with Type C cable, sold separately) or use an Apple iPhone with Maclan WiFi module (sold separately) with Maclan Smart Link App. The DRK 160+ TSR Edition box includes the DRK 160 RS Edition ESC, 20cm receiver cable x1, ESC power switch x1, USB data cable x1 and a Maclan decal.

Source: Maclan Racing [maclan-racing.com]

February 16, 2023

T-Works Polarity Heatsink Connector

T-Works has released these ‘Polarity Heatsink Connector’ sets. Available in 4 and 5mm, the gold male bullet connectors are low profile. The plug grips are available as a red and black option for easy polarity identification or as a set of black grips for a more stealth look.

Source: T-Works [rc-tworks.com]

February 16, 2023

VP-Pro 1:10 Tyre Mounting bands

VP-Pro has added small size version to their tyre mounting band group specifically designed for 1:10 Buggy and 1:10 Grand Touring. Made from high-elasticity silicone rubber and finished in VP-Pro Brilliant Blue, the bands have 6 outer tabs for even placement on the tyre in preparation for gluing. The bands come supplied as a pack of four bands.

Source: VP Pro [vp-racing.com]

February 15, 2023

Capricorn 1:8 GT tyres

Capricorn RC, under its ONE brand, has announced the release of an all new 1:8 GT range of tyres. With a stylish black rim design, the new rubber has proven extremely durable and high performing right from the first tests. In racing, the new tyre has already showed it’s performance with a strong result from Diego Morganti who took 2nd place over the weekend at the famed annual WinterNats in Florida. The tyres are designed to give the best performance and durability in the hope that it will reduce costs and make a more sustainable tyre for the GT Classes. The new range of tyres also allows you to run Foam and Rubber classes simultaneously without causing issues with GT rubber debris. Available in three compounds, Capricorn say the medium tyre will last over 1-hour maintaining strong performance throughout the race.

View compound chart here

February 14, 2023

Infinity IF18-2 Chassis & Washer Sets

New from Creation Model is this new optional chassis plate for the Infinity IF18-2 1:8 Onroad kit. The rigidity of the rear section of the R0340 chassis can be adjusted by adding a flat head screw. Also new from the Nitro Onroad World Champion manufacturer are stainless steel shims with an inner diameter of 3 mm, outer diameter of 4 mm, and thickness of 0.1 mm. The outer diameter is smaller than that of a standard shim while maintaining an inner diameter of 3 mm, allowing you to make adjustments to the clearance of shafts and other parts that were previously not possible. Finally they have released 3×8 Aluminium washers in 0.5, 1, 2, 3, 4 & 5mm thicknesses which are high-precision machined aluminium with black colour alumite treatment. Larger outer diameter (8 mm) than standard aluminium spacers makes them suitable for use in locations where large forces are applied.

View more images here

February 13, 2023

Awesomatix A12 Alloy Steering Block Post 2 degree

Awesomatix has released these Alloy Steering Block Post 2 degree for their successful A12 1:12 racing chassis. Notching up another international title from the TQ at the recent Snowbird Nationals in Florida in the hands of World Champion Marc Rheinard, the new ST1208-C2AL parts offer a weight reduction of 2,3g/pcs compared to the standard steel ST1208/ST1207 steering post combination.

Source: Awesomatix [Facebook.com]

February 13, 2023

SuperRad SR-05 and SR-03L 1:12 LMP bodies

American race body manufacturer SuperRad Competition Bodyshells has released two new 1:12 LMP models to its line up, the all new SR-05 and the redesigned SR-03L. The SR-05 is the result of several months of testing and development and offers balanced handling and stability and is ideal for stock and super stock racing. Fitting all 1:12 cars, it is available in SuperLite .015” and Lite .020” polycarbonate and is ROAR, BRCA, and EFRA approved.

Read SR-03L details and more images here