Red RC » P On Road

October 31, 2023

Kurzbuch is Top Seed in Japan

Simon Kurzbuch is the Top Seed at the IFMAR 1:8 Onroad World Championship, the Mugen Seiki driver setting the fastest 3-consecutive laps of the day in the fourth & final round of timed practice in a great battle with Capricorn’s Toni Gruber. The duo swapped position at the top of the timing screens, their engine tuner Daniele Ielasi finding it hard to keep up with which of drivers was currently fastest, but at the end of the 7-minutes it was Kurzbuch who was 2/10ths faster than Gruber. That time would give the very much back in form 2015 World Champion the tiebreaker in the final seeding points ranking as himself and Gruber both count a P1 & P2 each. Fastest in the second round, Infinity’s Naoto Matsukura would put himself out of contention for the confidence boosting Top Seed status when he crashed out just before the final 2 and a half minutes of the run which is when the times start to tumble. Another contender, having topped Round 3, Dario Balestri could not match the lead pace and finished with the third fastest time just ahead of Infinity team-mate Jesse Davis. Overall that would seed Balestri third.

Continue reading here

October 29, 2023

Double TQ for Payne at Masters of Foam

Schumacher’s Ollie Payne has pulled off the TQ double at the annual Masters of Foam event in Belgium. The British driver, who is the reigning Champion of what has become one of the big 1:12 races in Europe, dominated Modified qualifying topping all five rounds. Behind him Xray’s former World Champion Alexander Hagberg secured P2 on the grid with Marcus Mobers completing the Top 3 for Sunday’s triple A-Main. In 13.5, Payne took four of the five rounds after a DNF in Q2 which went to the similar car of Morgan Williams who lines up P2 on the grid ahead of Awesomatix’s Max Machler. In the GT category, it is good to see the next generation coming through with Louis Mobers, son of 1:12 stalwart and 2023 Mod class runner-up Marcus, taking the TQ after topping 4 of the 5 qualifiers.

Image: Schumacher [Facebook]

October 27, 2023

Xray X12 ‘24

With the IFMAR 1:12 World Championship just over a month away Xray has released their latest 1:12 chassis, the X12 ’24. What Alexander Hagberg will use at Beachline Raceway in Florida in his quest for a second World title in the category, the most visual difference on the new car is the all-new 3D printed rubber bumper. This improves body shell support for more aerodynamic efficiency and the 3D printed material doesn’t fold or break, and improves front grip by allowing more airflow under the body. Also new are graphite front lower suspension arms that are 2mm wider each side and improve cornering speed and handling precision. Thinner 2.0mm side braces increase traction for more forgiving handling and new side spring retainers, made from steel instead of composite, produce more precise and more consistent side dampening action. Another improvement on the X12 ’24 is the centre shock gets new geometry with the mounting point moved further back for quicker direction change, as well as improved on-power steering. The shock features a new stiffer spring for improved steering and response.

View the full X12’24 presentation here

October 26, 2023

LRP ‘Highflex’ V2 Sensor Wires

LRP has introduced a new range of ‘Highflex’ V2 Sensor Wires. Based on their popular original sensor wires they get further improved specification and the addition of 175mm length which is perfect for 1:10 2WD use. Also available in 70mm, 95mm, 150mm and 200mm, each sensor wire is packaged 3 wire strands next to each other and stacked in 2 rows on top of each other, perfectly positioned with a shrink tube, which is not too tight and not too loose with further improved crimping. This gives a tight fit to the motor and ESC sensor ports.

Source: LRP [lrp.cc]

October 26, 2023

MXLR ONE/TT01/TT02 FlexBumpers & T-shirt

MXLR has extended its FlexBumper production line with addition of models for the Iris Racing ONE / ONE0.5 / ONE0.5 FWD and Tamiya’s TT01/TT02 1:10 Electric Touring Cars. The ONE FlexBumper matches the original footprint but has a lower overall profile. A direct replacement for the kit foam it lowers overall profile helping to keep the weight in an acceptable range. Featuring two MX logos on the backside to prove the originality the MXLR FlexBumper weighs 8.5grans compared with the original kit bumper at 6grams. The MXLR FlexBumpers are 3D printed with thermoplastic polyurethane for the optimal strength and flexibility and bsorbs hits better and don’t transfer them as much into the chassis structure. For the Tamiya TT01/TT02 they are also a direct replacement with a small and large option available. In addition to new stuff for your car MXLR has something forthe driver with the release of their first ever t-Shirt. Inspired by a famous motorsport design, the MXLR RC Motorsport T-Shirt is made from 100% cotton with a high quality DTF transfer print on the front and back side.

View more images here

October 26, 2023

Mugen Seiki MTX7R 1:10 nitro touring car

Mugen Seiki has announced their new MTX7R 1:10 nitro touring car kit. The car gets new front and rear suspension geometry with longer arms to reduce the unexpected behavior and make the vehicle more predictable. The front arms are 1mm longer and the rear arms are 4.5mm longer, and the front/rear wheel offset has been optimised. The car also gets a new Chassis plate, new Rear Lower Bulkhead, new Rear Anti-Roll Bar Φ2.1, Axle Shaft, and 5mm Alu Wheel Hub.

View more images here

October 25, 2023

Iris ONE One-Piece Topdeck 2.0mm

New from Iris Racing is this 2.0mm One-Piece Topdeck for use on its ONE and ONE.05 1:10 Electric Touring Car. The optional part provides an additional setup option that makes driving easier and more predictable, whether it’s on an asphalt or carpet race track. It stiffens the car especially in the area of the motor mount, making it a bit stiffer overall.

Source: IRIS [iris-racing.com]

October 23, 2023

T-Works MTC2R Lower Arm Pivot Insert Nut Driver

T-works has released a Nut Driver specifically designed for the Lower Arm Pivot Insert on the Mugen Seiki MTC2/MTC2R 1:10 Electric Touring Car. The Hard Coated 7075-T6 driver features a specially machine tip for easy mounting and removal of the lower arm pivot inserts.

View close up of tip