Red RC » P On Road

July 1, 2022

Exotek lightweight F1 spool set

From Exotek comes this extra lightweight carbon fibre and 7075 alloy clamping spool set for F1 cars with a 1/4 rear axle design such as for the F1Ultra, X1 and Roche. An F1 spool helps eliminate ‘diffing out’ of the rear pod on extra high grip black carpet conditions and gives your F1 more corner exit speeds. This spool also greatly reduces the weight compared to a gear diff or standard ball diff for a cooler running motor and increased acceleration. The sturdy design eliminates any holes in the shaft for increased shaft durability. The spur mount keys directly into the supplied right side wheel clamp and makes for easier gear swaps as well. Also the right side wheel clamp uses 2 screws style clamping which requires less force on the screws for better clamping force.

View more images of the spool set here

June 30, 2022

Associated belted drag slick tires

Team Associated have introduced new belted drag slick tires. Featuring a soft rubber compound for No-Prep RC drag racing, they have overmoulded polyester belting for better dimensional stability meaning the tires will not balloon during your runs. They have a lightweight carcass design and use a standard 2.2″/3.0″ bead.

Source: Associated [associatedelectrics.com]

June 29, 2022

1up Racing Cruz Missile outdoor tire additive

Introducing the new 1up Racing Cruz Missile outdoor tire additive.. 1up have tested extensively with 1up Racing Factory driver Jacob Cruz to find the best outdoor tire additive across a range of surfaces, temperatures and grip levels. Cruz Missile tackles them all and is capable of setting the fastest laps with feel and grip that remain consistent over a full run. Supplied in a handy bottle with foam applicator.

Source: 1up Racing [1upracing.com]

June 27, 2022

Mon-Tech Racing RS Sport-M 1/10 Mini body

Mon-Tech Racing have released their RS Sport-M, a new body for the M-Chassis category. This body can be mounted on all M-Chassis models, it is made from 0.75mm high quality polycarbonate. The kit includes the fixing screws of the rear wing, the window masks, the headlight decals and the graphics as seen on the body.

View more images of the RS Sport-M here

June 24, 2022

Takashima D-13 multi functional TC set up system

Takashima D-13 have released this multi functional set up system for 1/10 touring. The set allows the user to check the camber of their car, check the car’s balance and even allows you to assemble your car tweak free. All made from carbon to keep things lightweight, the camber gauge can check 1, 1.5, 2 and 2.5 degrees. The gauges do triple duty as they are used alongside the carbon tweak rod to press down on the top deck during assembly and they are also used to support the tweak rod when in the balance mode. The rod is pushed through two adjustable carbon brackets which in turn are attached to the car’s shock tower and when hanging freely you can see the car’s balance and adjust accordingly.

View more images of the setup system here

June 23, 2022

Protoform Nissan Skyline GT-R R34 body

Protoform are bringing one of the most legendary tuner cars ever built to the 1:7 scale Arrma Infraction with the release of the 2002 Nissan Skyline GT-R R34. Perhaps no 1:1 car captures the overpowered, all-wheel-drive, power-sliding, rubber-burning vibe of the Arrma Infraction more than the car they call “Godzilla”. The officially licensed body captures all the exceptional details of its 1:1 counterpart with some added wide-body JDM styling. The extensive decal sheet lets you deck out your R34 with Nismo badges, windshield headers, and tuner-style sponsor logos. The R34 is Made in the USA from durable 1.5mm thick high-quality polycarbonate with paint-then-peel overspray film. Also included are a custom add-on front splitter and rear wing with mounting hardware to complete the super-scale look.

View more images of the R34 here

June 22, 2022

Infinity 0.75mm aluminium spacers

Creation Model have added to their line up of Infinity aluminium spacers with the addition of these 0.75mm thickness versions. This in between size allows for more precise setups with the silver colour used to easily distinguish them from 0.5mm and 1.0mm thickness spacers which are black and red respectively. Sold in a pack of 10 pieces.

View the spacer set here

June 22, 2022

Rêve D aluminium adjustable servo horn

This lightweight and super rigid split servo horn from Rêve D can adjust the distance from the centre of the servo horn to the rod end ball steplessly from 19mm to 23mm with just one screw. It is possible to instantly adjust the lever ratio according to the servo speed and counter timing. There are two types of spline fitting, 25T (for servos such as Futaba and Rêve D) and 23T (for servos such as Sanwa and KO) so that you can choose according to the servo manufacturer you are using. A secure clamp method is used for mounting the horn and can be firmly fixed.

View the different servo horn sets here