December 31, 2020

Rebellion RC T4’21 Crossflex aluminium chassis

Following on from yesterday’s release of the Rebellion RC Crossflex aluminium chassis for the Awesomatix MMX, there is now a version for the T4’21. Just like the MMX version this too is much narrower than the previous version, at only 76mm it improves roll-behaviour and prevent the chassis from touching the ground. The holes for the short swing arms were removed which made it possible to make the rear end narrower which leads to improved on throttle traction. In the front the Crossflex inserts were replaced by the new Y-Stiffener as well as a new X-Stiffener for forward Servo mount which gives you a lot more flex-setting options. Last but not least they have made new floating-plates for ESC and Electronics, that are available in brass for stock and aluminium for modified for perfectly adjusted car-balance depending on batteries used. Due to the re-positioned battery holder holes the chassis comes with a set of longer carbon battery holders.

View more images of the chassis here

December 31, 2020

Arena RC T4’21 single side upper deck set

Arena RC Racing have released this graphite single side upper deck set for the Xray T4’21. Similar to the previous iteration for the 2020 T4 but updated for the latest car, the single sided design claims to offer improved cornering speeds due to optimised flex characteristics and the top deck comes including 1mm carbon fibre shims that further add to the new torsional flex behaviour. The top deck is machined from high-quality 2.0mm carbon fibre.

Source: Arena [facebook.com]

December 30, 2020

Rebellion RC MMX Crossflex V2 aluminium chassis

Rebellion RC’s new Awesomatix MMX Crossflex V2 aluminium chassis is much narrower than the previous version, at only 76mm it improves roll-behaviour and prevent the chassis from touching the ground. The holes for the short swing arms were removed which made it possible to make the rear end narrower which leads to improved on throttle traction. In the front the Crossflex inserts were replaced by the new Y-Stiffener which gives you a lot more flex-setting options. Last but not least they have made new floating-plates for ESC and Electronics, that are available in brass for stock and aluminium for modified for perfectly adjusted car-balance depending on batteries used.

View another image here

December 30, 2020

Xpress spur gear support plate

Designed specifically for Drift cars, mount your spur evenly with this aluminium spur gear support plate. The aluminium plate creates an evenly distributed load which allows for a more precise and quiet drivetrain. Comes in the signature black with red highlighted edges and laser engraved Xpress logo.

View the mounted plate here

December 29, 2020

T-Works Kyosho GT3 gearbox plate

For the Kyosho GT3, T-Works have released this graphite centre gearbox plate. Featuring two bearings for the brake cams, the plate is a direct replacement for the kit metal version, reducing weight and adding that factory carbon look.

Source: T-Works [rc-tworks.com]

December 28, 2020

Fenix Racing G12 & G56 front end options

From Fenix Racing for their G12 and G56 come some new front end option parts. For the G12 and G56 there is now the ability to run the CRC long upper arms using a new carbon brace and upper arm mounting plates for each car. Exclusively for the G56 there is a wider front suspension mounting plate and brace that is 4mm wider than the regular part which allows the user to mount the wide CRC front end, suitable for fast flowing tracks.

View the new parts here

December 26, 2020

Yeah Racing Hackslider mini gyro V3

Hold that perfect drift angle combined with high speeds with this Hackslider mini gyro V3 from Yeah Racing, pre-loaded with a customised firmware for Drifting. It comes with aluminium Heat-sink case for high efficiency cooling and features adjustments to suit every servo on the market, ranging from analog to digital servos and you can also reverse the direction which the gyro acts. The gain (or sensitivity) can be adjusted on the fly for drifters with transmitters featuring more than three channels and also can be adjusted on the gyro itself. With the super small footprint, you will be able to mount this gyro anywhere and create very clean installs.

Source: Yeah Racing [yeahracing.com]

Tonisport
Mibosport
LC Racing
VP Racing
T-Works