Red RC » P On Road

February 1, 2019

R1 Digital-3 brushless speed controller

New from R1 Wurks comes the LCG Digital-3 2S/1S wireless programmable brushless speed controller. Developed using the most advanced microchip processor and a robust proprietary software, the speedo delivers some of the most technologically advanced features to date. Development of the LCG controller was focused on ultra smooth power delivery needed for modified racing as well as supreme power efficiency for stock motors. The unit features an A.C.L.C. Advanced Component Level Cooling system. This design allows individual encapsulated low resistance Mosfets – inner and outer components – to transfer heat directly to the upper heatsink. The system also comes equipped with an all new zero timing blinky mode for spec racing, using an advanced commutation algorithm called Cool Power to keep the motor cool and deliver powerful, yet ultra-smooth acceleration. The LCG Digital-3 boasts a redesigned case minimising overall weight and lowering the centre of gravity. R1 Wurks have minimised the weight from the upper case while improving heat dissipation, achieved by improving air velocity exits from all sides of the ESC case. All adjustable settings are easily programmed using the R1 Wireless Adapter coupled with an iOS or Android app designed with an intuitive, easy to use interface. The new R1 Digital-3 app also features a super-fast live telemetry and a built in datalogger for after race analysis. Built in Amp draw meter for setting motor timing or for after race analysis. Using the new over the air updates feature, firmware updates are now easily downloaded through our iOS or Android apps.

View lists of the features and specifications here

February 1, 2019

Arrowmax Arrowspace BD9 magnesium chassis

Coming soon from Arrowmax’s Arrowspace series of magnesium chassis is a dedicated variant for the Yokomo BD9. Made of high-quality magnesium material and featuring a ceramic coating for wear, the chassis is about 40 percent lighter than a standard aluminium chassis while offering slightly increased flex compared to an alloy main plate, creating characteristics that range between a carbon and alloy chassis. This allows to further fine-tune torsional flex chassis flex.

Source: Arrowmax [arrowmax-rc.com]

February 1, 2019

Tamiya release new TRF419 XR optionals

Tamiya have announced the soon release of a couple of new optional parts for the TRF419 XR as well as some general accessories. First up is a 2mm 7075 aluminium lower chassis plate for the TRF419 XR. The chassis was developed for the use on high-bite surfaces such as carpet and prepped asphalt. It offers higher torsional rigidity than the carbon chassis for improved handling in high-grip conditions. The chassis is best used with the 1.75mm carbon fibre upper deck and comes black anodised for wear and looks.

Continue reading here

February 1, 2019

GForce Maximum 3200mAh 2S shorty battery pack

Coming from GForce and part of their Maximum series of high-performance LiPo batteries is a new 7.4V 3200mAh pack. The power source is built using 50C/90C cells and it is of a low centre of gravity design, measuring 92.5x46x18mm. It weighs in at only 153g, utilises 4mm bullet-type connectors and it can be used in 1/12th on-road as well as 1/10th on-road and off-road applications.

Source: GForce [gforce-hobby.jp]

February 1, 2019

ARC R8.2 1/8th nitro on-road kit

ARC have released first details of their forthcoming R8.2 1/8th nitro on-road kit. The car is based on the successful R8.1 and features an all new 2-speed adapter that is 4g lighter than the previous part to reduce weight and increase drivetrain efficiency. An all-new rear suspension block moves the suspension pins and thus lower arms 3.5mm towards the centre, creating more side bite and stability while longer arms retain a proper geometry. The arms are optionally available in hard, standard or soft compound to adapt the suspension to all requirements and track conditions. Also new with the R8.2 is a chassis weight adjustment system that allows to change the weight bias in a wide range by using adjustable weights or braces. Another area that received a make over is the upper deck that now incorporates a laydown throttle servo, not only to lower the overall centre of gravity but also to help equalise chassis flex and optimise weight distribution left to right. ARC will also release an electric 4S LiPo conversion kit for the use with shorty batteries, allowing to run the car both in nitro or electric specification.

View another image here

February 1, 2019

Muchmore long belt-type tyre warmers

Made for the use with Muchmore’s CTXW and CTXW Pro tyre warmer units are long belt-type tyre warmers. They are ideal for 1/10th off-road and 1/8th GT tyres due to their 440x60mm dimensions. They easily wrap around larger diameter tyres, are size adjustable using hook and look straps and feature 800mm connector wires for easy handling. The tyre warmers come in 4-piece sets.

View more images here

January 31, 2019

WRC NTX.3 1/10th 200mm nitro touring car kit

Italian company WRC have introduced their new NTX.3 1/10th scale 200mm nitro touring car kit. The car only received some minor upgrades compared to the NTX 1.2, such as new shock absorbers, an upgraded clutch bell and a new plastic composite material for improved quality. Standard features include an aerodynamic ground effect front bumper and rear diffusor, symmetric suspension components for easier spare parts management, optional adjustable balance weights and an innovative magnetic brake return system. Te kit is rounded out by a floating radio plate system.

View more images here

January 31, 2019

Xtreme Aerodynamics EP 1/8th electric on-road body

Xtreme Aerodynamics have introduced their new Diablo EP body shell for the 1/8th scale electric on-road cars. Based on the ultra-successful Diablo, the new body shell is aimed at the growing 1/8th electric classes, being usable with both suspension and pan cars and offering an air intake above the cabin that directscooling air towards the batteries, controller and motor for less power fading in long mains or when running in hot weather conditions. The body comes clear in light and ultra lightweight versions and also as pre-cut variants for the major brands.

View more images here