Capricorn have introduced the One .12 Tuned Miami Edition 2.1cc nitro on-road engine. The limited edition offering features a new timing, an updated liner as well as a larger head, the latter will improve cooling efficiency in difficult conditions. The competition engine also features a DLC-coated crankshaft and it is available now.
Source: Capricorn [capricornrc.com]
Coming soon from RCON is the R4WRC WorldRX and TCR body shell for short wheelbase M-type chassis. The body is made of 1.0mm polycarbonate material and it is usable for rally or touring car applications as it can be used as a WRX rally or TCR on-road body shell. The lid offers a 208mm wheelbase and at a width of 168mm and it comes including window masks, a decal sheet and an add-on rear wing.
Source: RCON Design [rcondesign.com]
Tamiya USA have announced the RC replica of the Toyota GAZO Racing TS050 Hybrid. The World Endurance Championship race car competed throughout the WEC 2018-2019 season and this specific kit celebrates Toyota’s first ever win at the famed 24 Hours of Le Mans. The Tamiya replica sits atop the 2WD F103GT Chassis, which is easy to build and maintain, thanks to its simple 2WD direct drive system with grippy rubber tyres that supply plenty of traction. The chassis’ FRP double-deck frame employs 1.5mm upper and 2.5mm lower decks, cushioned by link-type arm and coil spring left/right independent front suspension. An FRP T-bar is the centrepiece of the rigid rear suspension setup, working in tandem with the friction plate and coil spring unit to provide a smooth drive. The height adjustable gear case allows a range of ground clearance settings, and contains a high-performance ball differential. Front uprights give a 3 degrees caster angle, and are equipped with 850 ball bearings. The kit is set for a release in January 2019.
View a list of the features here
Xray have introduced their eccentric ball bearings clamps for the X1 and X12 cars. The rear axle mounts allow to adjust the wheelbase for a short and a long setting, differing by 1mm. The black-coated alloy parts do not use composite hubs for the bearings and generally a shorter wheelbase car rotates faster in slow corners and has improved forward traction whereas a longer car is freer in high-speed corners and will feel more linear, especially during fast direction changes. The clamps fit the X1 and X12 cars and they come in pairs.
Source: Xray [teamxray.com]
Following their successful 1/10th 200mm World Championship winning campaign, Infinity has released a new optional hard chassis as used by their drivers during the Miami event. Featuring a stiffer rear section, this results in both increased traction and response compared to the standard IF15 kit chassis.
Source: Creation Model [creationmodel.net]
Xpress have introduced their new aluminium layshaft bulkhead for the Execute XQ1S and XM1S on-road kits. The part replaces the standard items for alloy pieces to increase rigidity when opting to run higher power motors. The alloy bulkheads will ensure the layshaft stays straight under hard acceleration and braking. The set includes two red anodised alloy bulkheads that are a direct replacement.
Source: Xpress [rc-xpress.com]
Coming from SWorkz and made for the S35-GT kit is a laydown shock tower conversion. The set includes 5mm Pro-composite carbon fibre shock extensions that attach to the front and rear lower arms, moving the lower shock mounting position further out by 15mm. Using the conversion will improve corner speed especially on high-speed tracks. Also included in the set are optimised front and rear carbon fibre shock towers to support the new suspension geometry and it is rounded off by suitable mounting hardware.
Following the “Nineteen” conversion kit for the Velox V10 1/10th 200mm nitro on-road kit, Shepherd now also announced the full Nineteen specification car kit. The car features a new rear axle geometry, making it more controllable when braking even under difficult track conditions or when hard braking is required. This was achieved by a wider rear lower wishbone distance and an updated upper wishbone mount with optimised upper camber link positions. The updated lower wishbone mounts are manufactured from high-quality 7075-T6 aluminium while the upper wishbone mounts are milled from high-quality German carbon fibre material. The lower wishbones have been completely redesigned to match the updated geometry and are moulded from high quality plastics. The rear anti-roll bar linkage is located slightly more to the outside of the wishbone for improved responsiveness and softer steering. Furthermore, the 7075-T6 aluminium chassis of the 2019 car has been optimised. Thanks to improved production and milling techniques and a slightly different layout, the chassis bends significantly less, even under heavy loads, which significantly increases its durability. An improved exhaust pipe holder makes the use of different pipe/manifold combinations of all manufacturers significantly easier and more comfortable and high-quality ball bearings with full metal seals complete the changes to the new car. The kit has already proven its capabilities by taking the 3rd place overall at the recent IFMAR 200mm Worlds in Miami, Florida is the hands of Shepherd pilot Edu Escandón.
