Red RC » P On Road

July 20, 2018

Hobbywing XeRun Justock 3650 SD G2.1 stock motor

Hobbywing have announced the soon release of their new XeRun Justock 3650 SD G2.1 electric brushless stock motors. The new generation utilises an updated can that is made of high-quality aluminium for a lower weight with two X-shaped openings further reducing weight while ensuring good heat dissipation. The built-in sensor and fixed timing endbell along with the balanced high-precision rotor ensure smooth and linear power supply and pre-shaped heavy-duty solder tabs make wiring easy and reliable. The motor is build to meet EFRA and ROAR rules and it is available in all popular stock windings from 10.5T up to 25.5T.

View more images here

July 19, 2018

BMT 016GT lightweight rear CV driveshafts

Italian company BMT has introduced a new lightweight CV-style rear driveshaft set for the 016GT 1/8th GT car. Using the set will increase stability while scrubbing weight at the same time as the wheel axles are about 8g lighter per piece.

View another image here

July 19, 2018

Yokomo YD-2/4 adjustable rear aluminium H-arms

Yokomo have introduced their new adjustable aluminium rear H-arms for the YD-2 and YD-4 series of drift cars. The multi-piece wishbones are slightly shorter than the standard parts for improved drift performance while included shims allow to fine-tune the car’s track width to ensure best possible adaption to various track conditions and driving styles. The sturdy alloy material makes for great precision and an optimised weight distribution with the arms being a direct fit on the YD-2EXII car but they require Y2-301D2 and Y2-301E2 rear alloy arm mounts as well as B8-301BS bushings for installation in all other YD-2 and YD-4 kits.

Source: Yokomo [teamyokomo.com]

July 19, 2018

CS Electronic Rocket V5 brushless speed controller

Coming soon from CS Electronic is their new Rocket V5 brushless speed controller for 1/10th scale classes. The 160A-rated ESC utilises an all-aluminium case with built-in on/off switch and it features a greatly improved firmware that allows to use a new yet unexplained Race Mode, as well as adjustable dead band, HV BEC voltage, current limiter, power curve, throttle frequency, RPM limiter, brake frequency, boost start point and boost timing features. The controller is adjustable using an optional programming box or PC interface and it comes pre-soldered including black power wires, a high-performance capacitor and a high-airflow fan.

View a list of the specifications and more images here

July 18, 2018

Schumacher Mi6evo ultra short shock conversion

Schumacher have introduced the ultra short shock conversion kit for the Mi6evo touring car. The conversion provides the car with a lower centre of gravity than the standard kit shocks and towers. Stroke has not been compromised, these shocks and towers actually give more stroke than a standard Mi6evo. The shocks offer enhanced damping characteristics with a new larger diameter while the lower CG reduces the risk of traction roll on high-grip circuits. Included come 3 and 4-hole pistons included that utilise a new improved fixing method using a screw and a new seal pack housing with new O-rings improve sealing to prevent leakage. The kit includes all the parts required to convert to the ultra short shocks, including a new 5.5 turn 1.4mm wire 3.0 (N/mm) Schumacher spring and it has already demonstrated its performance in the hands of Schumacher’s Michal Orlowski with his 3rd place at the ETS Hudy Arena.

Source: Schumacher [racing-cars.com]

July 18, 2018

Arena IF14 1.75mm carbon fibre top deck

Arena RC Racing have introduced a 1.75mm carbon fibre top deck for the Infinity IF14 touring car. An in-between solution, the upper deck adds to the original 2.0mm and the optional 1.6mm top deck to allow for better flex control when running different main chassis. The part is machined from high-quality material and it is a direct fit.

Source: Arena RC Racing [facebook.com]

July 18, 2018

Yokomo Max Power 4600mAh 100C Shorty LiPo battery

Yokomo have introduced the new Max Power 4600mAh Shorty LiPo battery pack. Made from high-quality cells and developed with both drift and 1/10th buggy racers in mind, the 2S battery measures 96x47x24.8mm and it weighs in at about 210g. With a lower price tag than Yokomo’s Racing Performer series the battery targets intermediate level and weekly club racers and it adds to the already introduced 3500mAh type.

Source: Yokomo [teamyokomo.com]

July 18, 2018

Hudy stainless steel 35g & 50g battery weights

Coming from Hudy are their new 35g and 50g stainless steel battery weights. Both were designed to fit into the battery compartments of cars designed for shorty LiPo packs and they help to up weight when needed. The 35g weight measures 95x47x1mm while the 50g measures 95×68.5x1mm, ensuring they can be used with standard 1/10th scale off-road cars as well as many other vehicles.

View the 50g weight here