March 16, 2018

Race Opt MTS T2 limited edition conversion kit

Race Opt have introduced a limited edition chassis conversion kit for the MTS T2 electric touring car. The set included a new carbon fibre lower deck, a new 1-piece upper deck, as well as updated front and rear bulkheads and bulkhead covers for easier belt tension and diff height adjustment. Also included are improved anti-roll bar mounts for reduced play, an updated inner servo mount that allows for proper LiPo battery spacing, a single piece motor mount with chassis flex adjustment and last but not last a centre carbon fibre brace to adjust pitch flex.

View more images here

March 15, 2018

Xray teasing electric-powered RX8 1/8th EP kit

Xray’s own Martin Hudy has shared the image of a prototype RX8E 1/8th electric on-road car on social media. The car is based off of the nitro-propelled RX8 and seems to use a drop fit electric conversion consisting of an updated radio tray assembly that takes two 2S shorty LiPo batteries and the speed controller while the motor mount houses an 1/8th-class motor with incorporated fan mount. We bring you more information on the subject as it surfaces.

Source: Xray [teamxray.com]

March 15, 2018

Serpent Project 4X Evo 1/10th touring car kit

Following extensive testing and several teasers, Serpent have officially announced the release of their new Project 4X Evo 1/10th 4WD electric touring car kit. The car makes use of the proven 4X platform but features several updates and improvements to further improve durability, performance and ease of maintenance. On the chassis side of things the Evo variant comes with a vertical top deck for less tweak issues, the chassis received an update to make for better flex characteristics and the new motor mount offers improved flex control. The suspension compartment features bigger heave dampers that hold more oil and utilise larger springs while fixed length moulded pull rods make setup more precise and convenient. New to the Evo are also lower mounting positions foe the RRS links, updated front and rear brackets improve durability, a blade-less front spool makes for better performance as do improved centre shaft holders. Last but not least come an updated steering system for a more linear feel, as well as new front and rear bumpers for easier access and improved performance. The kit will hit stores by end of March.

View more images here

March 15, 2018

PSM X1’18 battery positioning system

PSM have introduced their new battery positioning system for the Xray X1’18 formula car. This battery positioning system was designed to hold the battery securely in place while maintaining the option to move it forward and backwards in order to fine-tune the weight bias. In addition PSM have added the possibility to hold it down with the included O-ring to make battery changes easy while because of its special design, the battery mount will not affect the chassis flex at all. Manufactured from PSM’s proven quality carbon fibre and including all necessary hardware, the assembly weighs in at only 9 grams in total.

View another image here

March 15, 2018

Xray RX8 extra eccentric steering blocks

Coming from Xray and made for the RX8 1/8th on-road car are steering blocks with two additional eccentric roll centre positions to make it a total of six. The small yet tough steering blocks are moulded from a special composite material for great durability and additional mounting holes allow the use of carbon fibre aero discs. The steering blocks are available separately for the left and the right hand side of the car from now on.

Source: Xray [teamxray.com]

March 15, 2018

Shepherd Velox E8 4S 1/8th electric on-road kit

Shepherd have introduced the new Velox E8 4S 1/8th electric on-road kit. Based on the Velox E8 platform, the car was developed to meet the demand for a cost-efficient and high-performance electric car that complies with the regulations of the newly created EFRA 1/8th electric on-road class. The updated radio-plate now takes two shorty-LiPos as well as the speed controller. The batteries are centred in the middle of the vehicle allowing for optimal balance. By positioning them as far backward as possible the traction was improved significantly, which is required when using high-torque electric motors. The speed controller is mounted directly on the chassis for easy access and good cooling efficiency. The redesigned motor mount accommodates a variety of different 1/8 electric motors and a built-in carbon fibre fan mount allows the installation of a large 40mm fan. The symmetrical chassis plate is characterised by ventilation openings and supports the cooling of the electronic components. The kit will hit stores very soon.

View more images here

March 15, 2018

Layne Spec NoHeat fan mounts

Layne Spec have introduced their new NoHeat fan mounts for Awesomatix and Xray touring cars. The mounts are of the proven duct design with a built-in shroud, dropping motor temperatures by about 10°C. They install easily on both platforms with one screw and use standard 30x10mm fan units.

View more images here

March 14, 2018

Arena 0.5mm carbon fibre touring car wing endplates

Arena RC Racing have released a 4-piece set of 0.5mm carbon fibre touring car wing endplates. While adding visual impact the plates add stability to the outer portion of the wing while still being very light of weight. The endplates are made from high-quality carbon fibre and measure 20x40mm, meeting most governing bodies’ requirements in terms of dimensions, however they may not be actually race legal in your area due to being considered a risk to other cars as well as marshals or the track surface because of their thin and rigid nature. The 4-piece set equips two standard touring car rear wings and it is available now.

Source: Arena RC Racing [facebook.com]

Mibosport
VP Racing
T-Works