The latest Hudy car bag to surface is a dedicated item for 1/10th Formula cars. Measuring about 43x22x8cm the bag takes a single chassis including mounted front and rear wings and it is made using brightly coloured fabric material, decorated with the renown Hudy graphics. The bag sports padded walls and a rubber strap, the latter to make attaching the bag to Hudy’s travel bag easy.
Source: Hudy [hudy.net]
HRC Distribution have introduced the HRC Racing 68124HVBL high-voltage digital brushless servo. Designed for 1/8th on-road and off-road classes the servo offers sturdy metal gears, a powerful brushless motor, dual ball bearings and it is high-voltage compatible, allowing to use it with 2S LiPo receiver battery packs. The standard-size servo pulls up to 24kg-cm of torque at a speed of down to 0.09s and it features a red anodised middle heatsink section.
Source: HRC Distribution [hrcdistribution.com]
Trinity have introduced two new flat-style sensor cables in a bright purple colour. Available as 105mm and 170mm variant the cables feature industry-standard connectors, making them compatible to all current controllers and motors, and they are made using super-flexible wires, allowing for neat and easy installation.
Source: Trinity [trinityrc.net]
Following the introduction of a 3-D-printed chassis protector for the Roche Rapide P12-2016 car, 3DRC from Germany now also made a dedicated 2017 version available. Designed to be a direct fit on the latest incarnation of Roche’s P12 platform, the 2017 variant sports an updated shape while still offering exceptional chassis protection and a low weight. The part is available through 3DRC’s Shapeways store.
Source: 3DRC [shapeways.com]
Coming from Exotek is a new aluminium clamp-on fan mount for 1/10th buggies, trucks and touring cars. Machined from aluminium and available in anodised black, blue or orange colour, the included mounting bracket has multi-mount features that allows the fan to be angled or parallel with the motor can. The angled design allows easy mounting of fans in 2WD buggies and trucks with laydown style gearboxes while for sedans the secure bracket holds the fan at a distance from the armature to avoid the magnetic fields of the motor disrupting the fans motor. The mount can also hold the fan at the end bell in cramped 4WD buggies by using camber shims for spacing. The mount is designed for use with high power 30mm fans and it fits all standard 540-sized 35.8-36mm diameter brushless motors.
Buri Racer have introduced an upgrade kit for the E1.2 4WD electric on-road car that allows to use split 2S LiPo battery packs instead of a single 4S brick. The kit relocates the receiver and controller to the left side of the centre belt, making for an improved weight bias, optimised tweak and an extremely low centre of gravity. The conversions requires the use of a low-profile servo and it includes redesigned carbon fibre parts such as the upper deck, battery mounts and front plate as well as all needed mounting hardware including hook and look battery straps.
Coming from T-Works is the extra hard foam bumper for the Yokomo BD8 and BD7 touring cars. Made of a special foam the bumper is much harder than T-Works’s already existing hard variant while at about 19g it is also about 12g heavier which allows to adjust the car’s weight bias by just changing the bumper. The bumper also extends 6mm further out the front compared to the kit part to eliminate the need to apply additional foam pieces when the bodyshell is mounted further forward on the car.
Source: T-Works [rc-tworks.com]
Kyosho have introduced the PureTen FW-06 GP Audi R8 LMS Red ReadySet 1/10th scale nitro on-road kit. The proven, shaft-driven FW-06 4WD chassis offers mild control responses, making it the perfect introduction to GP touring cars. A 2-speed automatic transmission and the high-power GXR15 engine combined with the same rear suspension as the World Champion V-One RRR also meet the demands of expert-level drivers, making the car race-worthy as well. Included with the ready-to-run package also comes a 2.4GHz Syncro KT-231P transmitter with failsafe function and the kit is decked off with a red Audi R8 LMS bodyshell.
View the features and more images here
