Red RC » P On Road

December 27, 2016

Motiv 2017 Defy LiPo battery line up

Coming from Motiv are the 2017 Defy LiPo battery packs for a range of applications. First up is the Defy V6000 2-cell pack, especially made for stock racing the chemistry will hold higher voltage at the top of the discharge curve, equalling more power at the end of the run. The pack weighs in at about 306g, making it also ideal for modified applications. Also new is the V4000 Shorty, a 2-cell offering that weighs in at 206g and that is intended for both stock and modified racing. Last but not least come two 1-cell batteries of 6000mAh (150g) and 7800mAh (155g) with the first being ideal for stock racing thanks to its special high voltage stock racing chemistry while the latter is intended for demanding modified racing with its high capacity of 7800mAh.

Source: Motiv [motivrc.com]

December 26, 2016

Yeah Racing T4’17 carbon fibre option parts

Coming from Yeah Racing is a range of carbon fibre option parts for Xray’s T4 2017 touring car. First up are two equal flex carbon fibre chassis plates of harder 2.25mm and softer 2.0mm specification. Both offer a symmetrical design with mirrored motor cut-outs that make for equal left-to-right flex characteristics. The chassis are direct replacements for the stock main plate and they are available separately.

Continue reading here

December 26, 2016

T-Works 1/10th touring car aluminium shock nuts

T-Works have announced the release of aluminium shock nuts for 1/10th scale touring cars such as the Yokomo BD7 and BD8 as well as the Xray T4. The spring preload adjusters are machined from high-quality 7075-T6 aluminium, they come black anodised and feature a laser-etched marking to make equal left-to-right adjustment easy. On top of this each nut sports individual corner markings for easy identifications of the left and right, front and rear shocks. Included comes a set of O-rings to securely retain the adjusted spring tension.

View another image here

December 23, 2016

Tekno RC bearing sleeve set

Tekno RC have introduced a bearing sleeve set for 8x14x4mm ball races. These bearing sleeves will save 1.3g of rotating mass per bearing meaning outfitted on all three differentials on a typical 1/8th vehicle, they are saving 7.8g of precious weight. The bearing sleeves are compatible anywhere an 8x16x5mm bearing is used, however, Tekno mostly recommend them for differentials. The set included six bearing sleeves and it is available now.

View another image here

December 23, 2016

BMT 984 low-friction pulley set & long ball cups

Italian company BMT have new optional parts for the 984 1/8th on-road car available. First up is a low-friction belt pulley set that uses a newly formulated composite material which creates a super-smooth surface for a more efficient drivetrain and overall upped performance. As the material is softer than the standard parts the wear rate is slightly higher. Included in the set are all drivetrain pulleys including the front spool and rear axle parts. Also new for the 984 is a set of extra long ball cups that come in handy when building longer rear shocks which can be helpful in certain track conditions.

View the extra long ball cups here

December 23, 2016

LRP FlowX competition brushless speed controller

LRP have officially announced their long-awaited new competition brushless speed controller, the FlowX. Follow-up model to the popular Flow, the all-new ESC (that we exclusively featured back in September) sports an all-aluminium case that comes in a new dark-blue anodising. The power wires are now of an all-black colour as are the flat receiver and switch wires all of which makes for a cool factory team appearance. Also new is the flat power capacitor board that makes for easier mounting. Inside the case the ESC houses new high-end FETs exclusively customised for LRP and a redesigned heavy duty power board with both features allowing for up to 220A constant current. Furthermore the controller features the new V4.1 firmware for easy on-board programming and a heavy-duty standard voltage 6V/6A BEC system. Included with the speedo comes an optional fan unit as well as two sets of alloy screws for standard as well as thicker heavy duty fans. The speed controller is set for a release at the beginning of January.

View the specifications here

December 23, 2016

Exotek Exo-Six flex top plate & TRF titanium rear axles

Coming from Exotek are the Exo-Six 2mm flex top plate and titanium rear axles for the Tamiya Evo6 and TRF419. Starting with the top plate, the part is made from 2mm carbon fibre and its design, with a full-length slot down the middle, offers more flex and traction for the Exo-Six conversion. The part is cut from US-made carbon fibre and it is available now.

Continue reading here

December 22, 2016

Tesla T12 V3 Black Edition 2.1cc nitro engine

Coming from Tesla is the new T12 V3 Black Edition 2.1cc nitro on-road engine. The competition power plant features an updated, silicone-filled crankshaft with different timing setting while the crankcase uses newly shaped transfer ports. Both updates will result in increased bottom end power while a new, black anodised and laser-engraved cooling head makes for optimised heat management.

View more images here