Red RC » P On Road

December 9, 2016

LapMonitor personal lap timer

LapMonitor is a new personal lap-timer for RC cars that can also be used to time multi-driver races. The device is simple and fast to setup; it will be installed on the outside track, then connected with the Bluetooth of any mobile device and it is good to go. In terms of functionality LapMonitor will not only announce lap times but also a full live race commentary in many languages while also enabling to store and share the timing results. It has been tested and adopted by 2016 European Cup 1/8th IC winner, Stephane Bouche and the LapMonitor Training Pack is now available on Kickstarter with a 40 percent discount. The pack includes one LapMonitor and one transponder. Multi-transponder packages are also available and the system is compatible with both iOS and Android devices and it features a Bluetooth range of up to 80m.

Source: LapMonitor [lapmonitor.com]

December 9, 2016

Xtreme Aerodynamics New Generation body stiffeners

Xtreme Aerodynamics have released information on their New Generation body stiffener set. Developed in cooperation with top drivers such as Robert Pietsch and Simon Kurzbuch and made from genuine Lexan material, the newly designed stiffeners are specifically moulded to perfectly match all Xtreme Aerodynamics 1/8th scale body shells. The parts come laser-cut meaning they are usable instantly and plastic rivets are supplied in the set so that the only work required is to drill a couple of 3mm holes in both the body and the stiffener, and to snap the rivets in place. As an add-on the set also includes an adjustable wing with plastic screws and nuts.

View another image here

December 8, 2016

Sanwa SRG-LS Black low-profile brushless servo

Schumacher Racing, Sanwa distributor in the UK, have introduced the SRG-LS Black low-profile brushless servo. The SSR and High Response mode compatible digital servo features a full metal gear train, double ball bearings, 2-cell HV-compatibility and it comes with a black-colour aluminium middle heatsink. At 7.4V input the SRG-LS pulls up to 12.8kg-cm at a speed of down to 0.08s, making it ideal for 1/10th touring and 2WD buggy applications.

Source: Schumacher [racing-cars.com]

December 8, 2016

Roche Rapide P12-2017 1/12th scale pan car kit

UK Roche distributor Zen Racing has released first images and information on the Rapide P12-2017 1/12th scale pan car kit. The car builds on the 2016 IFMAR World Championships and ROAR Nationals winning car and it utilises a newly designed 2.5mm carbon fibre chassis and rear power pod plate. Other areas that received a make over are the floating servo plate, the front lower aluminium bulkheads, the rear alloy chassis brace and the low centre of gravity motor mount. The rear centre top plates also are of a new design to accommodate the Rolling Friction Adjust System RFAS and included in the kit are furthermore a new big bore centre shock and new diff and clamping wheel hubs that allow the use of M2.5x8mm screws. The kit is rounded out by redesigned alloy side spring mounts and aluminium steering turnbuckles. More information and images should become available in time for the release.

View a list with the new features and more images here

December 7, 2016

ProTek Silicon Graphene HV LiPo batteries

ProTek have introduced their new Silicon Graphene HV LiPo battery packs. Made from 100C LiHV cells the packs offer a lower internal resistance and improved efficiency which results in lower operation temperatures, better runtimes, increased voltage and doubled charge cycles. Ideal for 17.5 racers the batteries are lighter and can be charged at rates up to 10C and they available are ten different configurations to support all popular forms of electric R/C racing. There are three shorty packs, a new low CG touring car pack, as well as several 4S and 2S stick packs.

Source: ProTek [protekrc.com]

December 7, 2016

Fenix Extra Mile High oil & Black Syrup grease

Fenix Racing have two new chemicals available in the form of the Extra Mile High ball bearing oil and Black Syrup thrust bearing grease. Starting with the oil, the chemical is a genuine aircraft-grade lubricant, usually used in high-speed turbines. The synthetic oil is oxidation and corrosion inhibited and shows great stability in low and high temperatures. It comes in a 10ml bottle with needle applicator for precise application. Also new is the high-grade Moly-based Black Syrup thrust bearing grease. It is ideal for all high-pressure applications and thus not only usable with thrust races but also driveshafts, gears and more. Last but not least comes a 12ml syringe with curved tip that can be filled with your choice of oils or greases. The curved applicator helps to easily rear almost any area of an RC car.

View the other new products here

December 6, 2016

Shepherd Velox F1 1-piece aluminium servo mount

Coming from Shepherd and made for the Velox F1 formula car is a 1-piece aluminium servo mount. Designed to give optional chassis flex characteristics the part replaces the standard centre post and it also acts as a floating mount, improving the car’s balance or as a chassis brace, increasing overall stiffness on high-grip tracks. Successfully used by Germany’s Tim Benson at the recent ETS season opener in the Czech Republic, the CNC-machined part is made from high-quality 7075-T6 aluminium and is available in blue or black anodising.

View the black anodised part here

December 6, 2016

Tamiya M-05 Mazda2 Demio M-chassis kit

The latest addition to Tamiya’s M-chassis range is the M-05-based Mazda2 Demio. Resembling Japan’s car of the year 2014/15 the kit utilises a front-driven M-05 chassis and it includes the highly detailed 4th generation Mazda2 Demio bodyshell. A comprehensive decal sheet including grille, head and tail lights as well as window details is also included as are replica wheels and high-grip treated tyres. The kit will become available in Spring 2017.

Source: Tamiya [tamiya.com]