Red RC » P On Road

July 13, 2016

Yokomo Europe BD7 silver brass -1mm arm mounts

Yokomo Europe have introduced new silver brass -1mm suspension mounts for the Yokomo BD7 touring car. The parts are machined from heavy silver brass material, making each about 10g heavier than the respective alloy counterparts for added weight at one of the lowest points of the chassis. In addition to allowing weight bias fine-tuning and gaining overall weight, the parts are also 1mm lower that the standard alloy suspension hangers, making running lower suspension pin settings possible; something the Yokomo team drivers have been using with great success at select races. Available is a full range of split and 1-piece front and rear mounts.

Source: Yokomo Europe [teamyokomo.eu]

July 13, 2016

Xray NT1’16 1-piece brass engine mount

Xray NT1'16 1-piece brass engine mount

Xray has introduced an optional brass engine mount for the NT1’16 1/10th 200mm nitro on-road kit. Providing solid engine mounting and easy gear mesh adjustment the part also adds a certain weight which can be beneficial in various track conditions as the mount moves the weight balance further back, improving the rotation of the car in medium-high traction conditions.

Source: Xray [teamxray.com]

July 12, 2016

RDRP Ultra Camber Gauge R2 version

Revolution Design Racing Products popular Ultra Camber Gauge is now available in the R2 version. Offering a slightly updated design, the tool, made from aircraft-grade 7075-T6 aluminium, now also comes in a choice of five different colours including red, orange, black, dark blue and light blue. Apart from that the functions remain the same with the gauge being usable for 1/12th to 1/8th scale vehicles, it is made from durable yet lightweight material and its laser-etched markings make it stand out from the crowd.

View the colour variants here

July 12, 2016

Arrowmax 7800mAh 2S LiHV battery pack

Arrowmax have introduced their new 7800mAh 2S LiHV standard-size battery pack. Build using high-performance 55C cells the high-voltage 7.6V LiPo pack comes in a protective hardcase with through-type 5mm tube connectors, 2mm balancer port and it sports split stickers to make sure the decals are not pulled off when removing any mounting tape. The battery is good for LiHV charging of up to 4.35V per cell but it is also usable with standard LiPo charging programs.

Source: Arrowmax [arrowmax-rc.com]

July 11, 2016

Reflex Racing RX4-16 chassis & T4 shock towers

Coming from Reflex Racing and made for the Xray T4 touring car are the RX4-16 quasi carbon fibre chassis and 4mm carbon fibre shock towers. Starting with the chassis plate, the RSD RX4-16 was developed for the Xray T4 and it is made from RSD’s own quasi isotropic 2.0mm carbon fibre for more rigidity, translating into increased response, grip and a lower centre of gravity over the stock unit. The shape profiles for the chassis have been developed over the past year with a focus to provide a more consistent car feel and less tyre overheating over a run. The design moves the flex to the bulkhead areas which results in a car that rotates faster and harder all while maintaining a higher level of grip. Additionally the chassis has been made completely symmetrical so that the left to right flex of the car can be equalised as much as possible.

content

July 11, 2016

BRP TRF102 black 1.5mm V2 FRP T-bar

The Border have introduced the new 1.5mm V2 FRP T-bar for the Tamiya TRF102 formula pan car. Designed especially for indoor carpet tracks the part offers a good balance between flexibility and stiffness, making it ideal for mid to high-grip conditions. Stronger than the original Tamiya T-bar and being a direct replacement the part, made from 1.5mm high-quality FRP, simply drops into place.

Source: The Border [the-border.com]

July 11, 2016

Tesla 540-size brushless electric motors

Tesla 540-size brushless electric motor

Capricorn have introduced their new 540-size brushless motors for 1/10th and 1/12th scale applications. Coming with a lightweight can that sports cooling ribs and large vent openings, the hand-built motors feature a balanced rotor and ceramic ball bearings for maximum efficiency and performance. The motor is available as 3.5T to 8.5T modified, 4.0T and 13.5T modified as well as 13.5T, 17.5T and 21.5T stock variant. As for the two 13.5T offerings, the modified motor is making use of a 12.3x5mm rotor while the stock variant comes with a 12.5×7.2mm rotor.

View more images here

July 9, 2016

Xenon announce new VSS 1/12th front end kit

Japanese company Xenon have announced the release of a new optional front end kit for all 1/12th pan cars that use a Team Associated R5 compatible front suspension. The kit is of a damped design and it includes the VSS front shock stay, front shocks, upper arm links with eyelets and front end castor blocks. It is of the proven Xenon design and quality and all parts are also available separately. Also available are 65m VSS side links compatible for Associated R5, Roche Rapide P12, Kyosho Plaza and Morotech kits.

View the side links here