Red RC » P On Road

February 24, 2025

Yokomo RD2.0 Aluminium Steering Bell Crank Set

Yokomo has introduced a new Aluminium Steering Bell Crank Set and Steel Front Axle for double bearing for its RD2.0 1:10 Drift Car. The aluminium steering bell crank set has a forward tilt angle on the wiper post to reduce bump changes when the angle of cut is applied, and shows neutral characteristics. The length of the servo rod attachment can be adjusted with a spacer, so the feeling can be changed by the lever ratio with servo activation. The front axle used in the double bearing design for ultimate rolling of the front tire is sold separately. Although made of steel for increased strength, the 3mm shaft and hub shape make it lightweight.

View Front Axles here

February 24, 2025

VP-Pro 1:8 GT Body shell

VP-Pro has released this new 1:8 GT bodyshell which features a streamline shape and special design that focuses on the high downforce to enhances the vehicle’s stability at high speed. Made from high-quality clear polycarbonate with protective film, the lightweight model of 0.8mm thickness helps to improve the vehicle’s speed and handling. The comes with a 1.2mm rear wing, hardware, decals and window masks.

View more images here

February 20, 2025

LRP X22 Stock Spec Motor Series Dual-Use Parts

New from LRP are these Dual-Use parts for their X22 Stock Spec Motor Series. With this system, you can configure your X22 Stock Spec Motor in two ways, Full Competition Mode or Fixed Timing Mode. In Competition mode you have adjustable timing and aluminium screws for maximum performance while in Fixed Timing mode for controlled racing you have fixed 30° timing and steel screws. To switch the motor from one to the other simply swap the components to switch between Timeable and Fixed Timing versions.

View more images here

February 18, 2025

Energy Speed Evo Onroad Fuel

Energy, the well known nitro brand of Italian fuel producer Pepe Group, has released a new formula of its popular onroad fuel. After 6 months of intensive testing, they have introduce the new Energy Speed Evo for the 2025 season. An evolution of the previously offered Speed formulation, in creating Speed Evo they have worked hard to optimise fuel efficiency and make the product even easier to use with it offering better lubrication for superior engine protection.

Source: Pepe Group [pepegroup.net]

February 17, 2025

RC Maker SP-1 Option Parts

RC Maker has released a number of new option parts of its SP1 1:10 Electric Touring Car platform. After rigorous testing across multiple tracks and conditions they have introduced optional ‘soft’ upper arms. These arms provide more caster flex which makes the car less aggressive initially but overall generates more traction in the corner. Also new from the Australian manufacturer are new optional brass battery hooks. Manufactured from brass with black oxide coating, they add weight (12 grams each) down low right next to the battery which is particularly useful when using ULCG Batteries where extra weight is required for correct balance. They can be used on their own in replacement of the kit carbon hooks, or can be used in conjunction with 5014 or 5016 Full Size or Shorty Weights to further increase the amount of weight on the battery side. The other new optional are Short ULCG Battery Posts for the SP1. Manufactured from 7075 T6 Aluminium with black anodising they are intended for use with Low ULCG Batteries Under 20mm in height.

View more images here

February 17, 2025

Destiny DTY-10 Touring Car Option Parts

Destiny has released more new option parts for its recently released DTY10 1:10 Competition Touring Car. The new parts include a 10-gram Motor Mount Weight which mounts on centre of chassis with no effect to car front to rear weight balance. A new 1.6mm Graphite Split Type Upper Deck is intended for high traction asphalt or indoor carpet surface with the effect of making the car easier to drive. The third of the releases are Hex Wheel Washers machine cut by POM. Replacing the kit rubber ring that locks the hex wheel hub these are more durable and reliable.

View more images here

February 17, 2025

MonTech C-Z06 1:10 body

Mon-tech Racing has introduced its latest GT 1:10 body shell with the release of the C-Z06. One of the most popular categories among model enthusiasts and RC racers as bodies used are inspired by real racing cars, the C-Z06 perfectly blends aesthetics and performance. The Italian manufacturer say they have further optimised the aerodynamics of this body, improving race performance. Made from high-quality 0.75mm thick polycarbonate, this body offers the ideal balance of strength and lightness. The body comes complete with window masks, headlights and grille stickers, as well as screws for attaching the rear wing.

View more images here

February 14, 2025

Reds Racing 721 Pista GEN3 .21 Onroad engine

Reds Racing has announced the launch of their new 721 Pista GEN3 engine for 1:8 Onroad. Innovations and improvements on the .21 engine include a new 7-Port Sleeve which has been designed for high torque and exceptional power output across the entire RPM range. The updated exhaust and intake port layout ensures increased performance over previous models. Additionally, the piston and cylinder have been revised through precise fluid dynamic studies to improve filling and optimise washing, enhancing overall performance. A High-Speed Front Bearing enhances engine durability and idle stability, ensuring smoother and more reliable operation. A lower center of gravity has been achieved with a redesigned Cooling Head improving vehicle handling and optimising aerodynamics for reduced drag, and enhanced cooling efficiency. A revamped Carburetor and Venturi features improved internal fluid dynamics, a repositioned high-speed needle, and a completely redesigned mid-range needle for more precise tuning and optimal performance. Additionally, the New Venturi XFlow is available as an optional upgrade, offering improved airflow and enhanced performance.

Source: Reds Racing [reds-racing.com]