Red RC » R On Road

July 8, 2016

BRCA 1/8 Electric On-road National Rd5 – Report

The fifth round of the BRCA National series took place at the Cotswold Model Car Club, returning to this track for the second time this season. Run alongside the Nitro classes, the race would see nice weather and as the 1/8 electric drivers are now figuring out their electronics packages, they’re edging closer and closer to the ultimate pace of the .21 engine nitro cars, all though it is clear to see that the electric cars have huge amounts of torque, the 4S battery limit is making the cars a little slower down the main straight. New comer Alex Thurston was setting the pace and it was looking somewhat ominous for the drivers behind him as he had such a pace advantage. Sunday morning headed into the qualifying which was dry and most drivers managed to get good clean runs in every round. After four rounds of qualifying the Electric A-final would line up as follows:

Continue reading the report here

July 7, 2016

Swiss Racing Cup Rd5 & Rd6 – Report

Round five and round six of the Swiss Racing Cup were recently held at the Sitterdorf track. In the 1/10th 200mm class, Patrick Fankhauser (Xray) qualified on the 4 spot during Saturday’s round five, but winning the semifinals allowed him to grab the pole position for the A-main that then saw Patrick being under pressure of TQ holder Philipp Buehler (Xray). Positions swapped due to a small mistake by Patrick but swift refuelling by his dad got him back into the lead that he would hold onto until the end to take the day’s win from Philipp Buehler with Michael Schäfer (Xray) completing the top 3 result.

Continue reading the report here

July 7, 2016

BRCA 1/8 Circuit Nationals Rd5 – Report

The fifth round of the BRCA National series took place last weekend at the Cotswold Model Car Club, returning to this track for the second time this season. For the first time in quite some time the weather at Cotswold was to remain warm and dry for the weekend ahead. During Saturday’s practice the grip was quite low in the morning with some drivers struggling to get a reference point for setup, but the track came good by around midday and allowed the drivers to start working on their car setup. Mark Green was setting the pace with the usual pack of drivers closely edging towards his pace. Sunday morning headed into the qualifying which was dry and most drivers managed to get good clean runs in every round. After four rounds of qualifying the Nitro A-final saw Mark Green taking the pole position from Tim Wood and Andy Hastings.

Continue reading the report here

July 7, 2016

Carlos Manuel wins at Portuguese IC Track Nats Rd4

Round four of the Portuguese Nitro On-road Nationals was held at the Pista das Travessas in Sao Joao da Madeira. Carlos Manuel would take the TQ after troublefull qualifiers with the Superpole being won by young Tomas Andrade. With track temperatures reaching 60 degree Celsius tyre wear was very high and a new set of tyres only lasted about 15 minutes. The main final was then dominated by tyre tactics and it was the pole setter who made the best out of the conditions, setting flying laps in the first 15 minutes to get enough margin on the second placed driver to change all four tyres. At the end Carlos would bring home the win three laps ahead of runner-up, Hugo Mendes with Tomas Andrade rounding out the top 3 result.

View the final results here

July 7, 2016

Simon Kurzbuch successful at Swiss Nationals Rd4

The fourth round of the Swiss Nitro On-road National Championship was held at the MRC Langenthal club that also celebrated its 40th anniversary that weekend. After four rounds of qualification once again it was Simon Kurzbuch claiming the TQ spot in the 1/8th class. In the main final the reigning World Champion continued to show a strong performance as he crossed the finishing line some two laps in front of Silvio Hächler with Ali Renato securing himself the final podium spot another seven laps down.

Source: Shepherd [team-shepherd.com]

July 7, 2016

Sweep Racing Hydroedge 1/10th wet weather tyres

Sweep Racing have introduced the Hydroedge 1/10th touring car wet weather tyre. Made using a special rubber that is softer than standard and coming with a unique tread pattern the belted tyre is usable in both damp and wet conditions. The tyre with the part number EXP-WT is the official wet weather tyre for the 2016 ISTC World Championships on Beijing and it will complement Sweep’s EXP-36R2PG dry weather hand-out tyre.

View both hand-out tyres here

July 7, 2016

Jin Sawada takes second Speed King Tour win

Round five of the 2016 Speed King Tour was held at the Keitune Racing Speedway, host of this year’s JMRCA Japan Electric Touring Nationals. As the race was the unofficial warm-up, many racers used the event to get some laps under their belts for the nationals at the end of July. For this race the Stock class was also run with 13.5T motors over the usual 17.5T machines to allow for better comparability for the open class racers that have to use 13.5T motors at the nationals. During practice, Yokomo driver Yugo Nagashima showed his speed in the Modified class with team mate Jin Sawada being on the same pace as Yugo. After the practice, most drivers also decided to use the Rush 44 hand-out tyre that will be used at the nationals. Overall the qualifier were pretty challenging with changing track conditions, making setup work a tough task. Ultimately Jin Sawada made the best out of the conditions, taking the TQ while Yugo only qualified for the 7 spot on the grid, suffering set-up issues.

Continue reading the report here

July 5, 2016

Steven Weiss teams up with Team Magic Europe

Team Magic Europe and HRC Distribution have announced the signing of Germany’s Steven Weiss to their team. The former European vice-champion, 6-time European Championship A-finalist and multiple ETS podium finisher will use Team Magic’s E4RS III Plus and he has the following to say about the deal:

I want to thank Team Magic and HRC to offer me the possibility to stay in RC Racing and their trust in me. I am happy to be a part of a still small and young Team with huge motivation and great teamwork. I will give all my knowledge and help into the Team and upcoming projects.

Source: HRC Distribution [hrcdistribution.com]