Red RC » Short Course

February 4, 2020

Reedy Zappers SG3 Competition 2S LiHV batteries

Reedy have introduced their new Zappers SG3 Competition 2S LiHV batteries for the 2020 season. They feature state-of-the-art silicon graphene LiPo cell chemistry with an emphasis on lower internal resistance with improved durability and cycle-life, resulting in more power, improved durability, and high capacity for exceptional performance. Zappers SG3 batteries feature a 7.6 nominal voltage, which means that the battery can be safely charged to 4.35V/cell. Even when the typical 8.40V charging limit is enforced, Zappers SG3 cells shine thanks to their inherently flat discharge curve, which results in higher voltage deeper into the race. The standard footprint stick line-up includes a 9600mAh 85C Stick (25.1mm/335g), 8200mAh 115C Stick (25.1mm/318g), 6000mAh 115C LP Stick (22.5mm/270g), and 5500mAh 85C ULP (19.5mm/230g). The shorty line up feature a 6100mAh 85C (25.1mm/225g), 4800mAh 115C (25.1mm/205g), 4100mAh 85C LP (18.5mm/155g), and a 3600mAh 115C LP (18.5mm/154g) battery pack. A high quality, durable hard case helps prevent damage while embedded socket connectors keep power-robbing resistance to a minimum. Male ESC connectors are included.

View the full line-up here

February 4, 2020

JConcepts BAJR V2 sand rail body shell

JConcepts have introduced their new BAJR V2 sand rail body shell for Slash 2WD and 4×4 trucks. Pronounced badger, the round Baja-esque profile of the cab area gives that familiar desert appearance. As the design develops toward the rear, the pronounced roof stabilising fin is large and in charge and rear deck area makes this body unmistakably JConcepts. An included rear wing with hardware adds rear downforce and aggressive sand throwing looks. The BAJR V2 is all about being unique, competition ready and concept inspired. The body fits the Traxxas Slash 2WD and 4×4 as well as equivalent vehicles and it can be run with a multitude of tyre styles. As usual the body comes clear, including window masks and a decal sheet.

View more images here

February 4, 2020

PerfTec GraviDisk Tungsten balance weights

Dutch company PerfTec have introduced their new GraviDisk Tungsten balance weights. Designed for the use with pretty much every on-road and off-road car, the weights are of a very compact design that could be achieved by using high-density Tungsten metal, a material that offers about double the density of bronze and 2.5-times the density of steel, meaning at the same weight of a bronze or steel weight, Tungsten weights are significantly smaller, allowing for easier placement and less wasted chassis space. The basic disc design was chosen to simplify production of the unique metal in order to keep the discs affordable for racers of all levels. The weight discs have an outside diameter of 13mm and are available in two heights: 2.5mm, weighing 6g and 4.0mm, weighing in at 9.5g a piece. The stackable weights feature an inner 3mm hole, making attachment to chassis plates using spare chassis holes a breeze. The GraviDisk weights come as 2-piece sets of the same dimension/weight or as 4-piece set containing two of each weight. The set also includes stainless steel M3 mounting hardware in the form of countersunk screws and self-locking nuts – all packed in a handy stackable box that can be re-used for storing all sorts of RC hardware.

View the individual weights here

February 3, 2020

Hudy ultra thin double-sided tape

Coming from Hudy is their new ultra thin double-sided tape that is perfect to mount receivers, speed controllers or balance weights. The tape comes in 140x50mm strips and due to being ultra thin it allows to place electronics much lower compared to standard thickness tape, which not only looks a lot neater, it also helps to lower the overall centre of gravity. The tape features extra-strong glue, it is yet super easy to remove and it comes in packs of five pre-cut stripes.

View another image here

February 3, 2020

JConcepts introduce new RM2 tapes

New from JConcepts are the RM2 aluminium reinforced and double-sided heat resistant tape. Starting with the aluminium tape, it allows to protect the inside of any RC body after paint and it provides several benefits including, but not limited to, added paint protection from fuel, scratches and rub marks and with the built-in fibrous material helps with rigidity of the body. The 50mm wide tape comes in 2m rolls.

Continue reading here

January 30, 2020

MaxAmps 2S 4750mAh Graphene shorty LiPo pack

Available now from MaxAmps is their new 7.4V 4750mAh Graphene shorty LiPo battery pack. Built from highest quality cells the battery weighs in at 207g and it measures 95.3×46.4×24.6mm. The black colour hardcase is equipped with 5mm tube-style connectors and due to offering a very low internal resistance and high capacity, the battery is ideal for both modified and stock class racing alike. Included come standard and balance semi-pre-soldered charge leads.

Source: MaxAmps [maxamps.com]

January 27, 2020

LRP Graphene 4 Competition Car Line LiPo packs

LRP have announced the soon release of their all-new Graphene 4 Competition Car LiPo high-performance LiPo battery packs. The batteries use newly developed Graphene 4 cells for higher capacity and further improved performance with Modified and Stock specific packs being available – the latter offering even more power for demanding stock racing classes. New for 2020 is also a new, darker sticker design while the iconic translucent blue cases remain the same as in 2019. The 2020 range will include three Modified specific standard-footprint packs such as the 6700mAh LCG, 5700mAh Ultra LCG and 5200mAh Hyper LCG battery. The Stock specific range includes a 9400mAh, 8100mAh, and 7400mAh standard as well as a 6100mAh LCG battery. As for the Shorty side of things LRP roll out 5900mAh and 4900mAh standard as well as a 4100mAh Stock LCG pack to which add 4600mAh and 4000mAh Modified LCG offerings. The first batch will hit stores beginning of February will full stock being expected for end of February.

View the Stock specific packs here

January 24, 2020

Team Associated DR10 RTR drag race car

Team Associated have introduced their all-new DR10 RTR drag race car. The DR10 drag race car is based on the 9-time ROAR Short Course National Championship winning truck and utilises a moulded low-centre-of-gravity chassis, metric hardware, 18 precision ball beatings, a 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch as well as an adjustable suspension. Other features include a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system, as well as AE’s all-new DVC Dynamic Vehicle Control receiver unit with built-in adjustable digital gyro. Add to that a Reedy metal-gear, digital, high-torque servo and a water-resistant enclosed receiver box. The DR10 is available as ready-to-run package and also in LiPo combo specification including a Reedy Compact Balance Charger and Reedy 7.4V LiPo Battery with T-plug.

View lists of the specifications and features and more images here