Red RC » Short Course

August 16, 2018

RPM Castle Sidewinder 4 ESC cage

Made for Castle Creation’s Sidewinder 4 speed controller is the new Traxxas-compatible ESC cage from RPM. The cage allows to securely mount the controller without having to use unreliable tape or zip ties as it secretly clamps the controller while being attached to the chassis using existing mounting positions. RPM also include a separate, encased on/off switch mount that bolts directly to the cage in one of four locations for extreme versatility. Since the switch attaches to the cage, no extra time is needed to remove it during maintenance or if owners decide to swap the ESC between vehicles. The cage is available in black or blue colour and it fits the Traxxas Stampede 4×4, Slash 4×4, Slash 4×4 LCG, Slash 2wd, Slash 2wd LCG and Rally as well as the Stampede 2wd, Rustler and Bandit, the latter three require the use of the Traxxas #3725 mounting plate.

View another image here

August 13, 2018

Yeah Racing M3 aluminium servo washers

Yeah Racing have introduced their new threaded M3 aluminium servo mount washers. The were designed to ensure better and more reliable servo fitment as they fit into the servo’s mounting lugs, making for more evenly spread force while preventing the servo from moving under load or in the event of a crash. the washers come pre-threaded for easier installation and removal and they are available in red, blue or black colour.

View the colour variants here

August 10, 2018

Team C shock & diff stand

Team C Racing have introduced their new shock and diff stand constructed from carbon fibre and polycarbonate. The tool is usable for both 12mm and 16mm shock absorbers and three machined pockets allow to place 1/8th and 1/10th scale gear differentials during building, setup and maintenance. The stand is made of high-quality carbon fibre and clear polycarbonate for a low weight and cool looks.

Source: Team C Racing [teamcracing.net]

August 9, 2018

JConcepts AE 6.1 aluminium C-block

Made for Team Associated’s 6.1 line of buggies and trucks is the new aluminium C-block from JConcepts. Available in blue and black colours, the precision-machined piece is carefully crafted to accept the standard Team Associated pill inserts. The suspension mounts are a critical piece of any vehicle, they provide the base for adjustments such as toe-in, anti-squat and wheel base. A stout suspension mount can go a long way to assuring your vehicle is technically correct and up to specification. The JConcepts mounts are light-weight enough for the weight conscious racer but beefy enough to stand-up to the rigours of high-end modified buggy racing. The mounts feature chamfer highlighted edging which improve the curb appeal and bring out the luster in any show or race ride. The C-block fit the B6.1, B6.1D, T6.1 and SC6.1 vehicles.

View more images here

August 9, 2018

Pilot RC Products X-Rings shock seals

Pilot RC Products have introduced their new X-Rings shock seals for 1/10th Team Associated vehicles and other brands. The shock seals are made of a special material that will do away with swelling issues, ensuring smooth and like-new shock action over a very long time. The result is better bump absorption and a more predicable ride over the course of a race weekend. Included comes a sample of Pilot’s Orange shock grease and the X-rings are completely able to be wiped off, greased and re-installed time and time again. The seals come in a sealing container and are usable for Team Associated, Serpent and Kyosho 1/10th cars.

Source: Pilot RC Products [pilotrcproducts.com]

August 9, 2018

RPM Pit-Pro Extreme car stand

RPM have introduced their all-new Pit-Pro Extreme car stand that has numerous adjustability options to fit virtually any 1/12th to 1/8th scale chassis and more. The infinitely adjustable support arms can sweep out to roughly 155mm all the way in to 54m). There are also 28 different mounting points for the support posts, giving owners added versatility to make sure their ride sits exactly how you want it to sit on the stand. The adjustable support arms sit on top of a swivel platform that allows the vehicle to rotate a full 360 degrees and tilts by as much as 45 degrees. Tilt angle is easily locked down with the included wing nut. All this sits atop an ultra stable base, with four load-spreading legs that can be moved to any position required. For transportation and storage the top easily slips off without any tools and the legs fold in for easy and compact storage. The pit stand is sold with all necessary hardware and comes complete with twelve soft, self-adhesive, slip free pads for the legs and the adjustable arms to prevent the vehicle and Pit-Pro Extreme from moving from exactly where you put it.

View more images here

August 8, 2018

Redcat Racing Camo TT & X4 PR RTR kits

As part of their new Summer 2018 line-up Redcat Racing have introduced the Camo TT trophy truck and Camo X4 rock racer 1/10th scale RTR vehicles. The Camo line utilises a new chassis design that offers the realistic driving characteristics of a full sized desert racer thanks to its 4-link suspended, solid rear axle and independent front suspension for a true desert and rock racing experience. The Camo TT and X4 are ready to run once owners supply the required batteries and charger and they are 2S LiPo-ready. The Camo was designed to be an all around great performer, as well as a stunning display piece while not in use. The TT’s realistic cockpit seats a driver and navigator, strapped in safely, with the spare tire captured inside the realistic roll-cage directly behind them. The scale body design allows the roll-cage to be seen as the Camo TT screams across the desert terrain while the X4 sports a full roll cage, and a detailed cockpit with scale driver and navigator. Additional scale details, like the fire extinguisher, round off the X4’s scale appearance. The aggressive off-road tyres grip the toughest terrain, and look awesome doing it. The unique horizontal tread design work well on both loose and hard surfaces alike. Both vehicles will hit stores this August.

View a list of the specifications and more images here

August 8, 2018

Axon Hyper Fan 6V motor & ESC fans

Coming from Axon are their new Hyper Fan 6V motor and speed controller fan units. Developed to deliver a maximum of cooling efficiency at 6V input the fans will be best used directly from a spare receiver channel. The 30mm and 40mm fans sport a black receiver wire while the 30mm ESC-specific unit comes with a standard black and red lead as well as a white 2-pole connector.

Source: Axon [team-axon.com]