Red RC » 2013

May 14, 2013

Vrielijnck makes it 2 from 2 in Dutch 1/8th Nationals

Last weekend the 1/8 onroad Dutch nationals were held on the very bumpy track of Groningen in the far north of Holland. The weather forecast predicted lots of rain for the whole weekend but turned out to be just some showers during the training days and a full dry and sunny race day, with just a drying track at the start of the first qualification session. At the end of NK qualification it was RickV making the fastest time taking the pole for the A semi final folowed by Robin d’Hondt who had the pole for the B semi final. Further on in the qualification ranking they were folowed by Steven Cuypers, John Ermen, Gunther v. Steay and Danny Leewis. After 2 very fast and thrilling semi finals the main final had RickV on pole. At the start of the main final RickV had a good start and was pulling away followed by John Ermen, Gunther v. Steay and Robin d’Hondt. Gunther had to retire after 20 minutes of the 30 minutes final promoting Robin to 3rd.

Continue reading the report here

May 14, 2013

Exotek TLR22 battery hold system

Exotek have released this new battery hold system for the TLR22, 22T and 22SCT. Easy adjust twist nut and strap system for perfect battery retention which attaches to a heavy duty machined alloy battery tray. The battery tray has 2 stock bolt locations but then a 3rd location is added at the front which allows you to mount it even closer to the battery (in rear motor configuration). The tray offers a perfect tighter fit around current 7.4v full packs and shorty packs although not for use with saddle packs. The entire battery hold set weighs only 15 grams.

View the mounted battery hold system here

May 14, 2013

Reedy 4600mAh 55C 14.8V LiPo battery

Tested and developed by the championship-winning factory team drivers, Reedy’s new 4600mAh 55C 14.8V LiPo battery is a must-have for the hardcore 1:8 buggy racer who seeks maximum power output and run time in a compact package. The battery’s weight makes it easier to achieve perfect left/right weight distribution while 5mm power sockets offer the same convenience and low-resistance operation that 1:10 and 1:12 drivers have enjoyed for years. A durable hard case protects the battery from damage while three 2mm balance ports allow for balance charging using the included balance charge harness. Two 5mm sockets are also included.

View the battery specs here

May 14, 2013

KM Racing joins Euro Nitro Series

KM Racing joins Euro Nitro SeriesKMLogo

With final preparations well underway for the first race of the Euro Nitro Series, the organisers of the exciting new championship for onroad nitro racers today announced that reigning 1:10 200mm World Champion manufacturer KM Racing will join the series coming on board as a Primary sponsor of the two race ‘Pilot Series’. Set to release its first 1:8 Onroad contender, the K8, which is currently under going final development testing, KM Racing join Xray, Shepherd Micro Racing and Novarossi as the key sponsors of the inaugural season of the ENS.

View the complete announcement here

May 14, 2013

Cabezas takes victory in Rd2 of Spanish Nationals

The second round of the Spanish 1/8th onroad Nationals was held in Madrid under sunny conditions and good temperatures. Qualifying saw Oscar Cabezas get the pole-position, being the only driver to make 14 laps on the way to a new track record, while in second position was Carlos Peracho. In the final Cabezas led the entire race and won by more than a lap advantage over Nacho Lopez in 2nd and three laps over Carlos Peracho in 3rd. Oscar leads the National standings with two wins from two races ahead of the third and final race on the 14th of July in Vigo, next to the beach.

View the final standings here

May 13, 2013

RDRP Ultra Shock stand

The RDRP Ultra Shock Stand is designed for the use with 1/10 scale standard and big bore shock absorbers and makes for a secure stand for the shocks while building, maintaining and setup work. CNC-machined from solid 7075-T6 aluminium, it sports a shiny black anodising and laser-etched markings. Additional markings and dents in the top and bottom part allow for easy rebound measurement and adjustment to help you build the ultimate shocks.

Source: RDRP [revolution-rc.com]

May 13, 2013

Double win for King at JBRL Rd2

Paul King reports from last weekend’s JBRL Nitro round 2 held at Palm Desert RC Raceway. ‘It was a hot hard fought win in the Buggy class, and a little easier cruise in the Truggy class for Cody. These were good wins for Cody as he maintains the points lead in both classes and retains the #1 number plates. Temps exceeding 100f made the effort just a little more difficult unless you pitted in a motor home with AC. Lots of water and wet towels were the order of the day.

Continue reading the report here

May 13, 2013

Yannick Aigoin double at French 1/10th Nationals Rd3

The 3rd round of the French electric offroad nationals took place last weekend in the town of Orange in the south of France, close to Marseille. Qualifying would see Associated driver Yannick Aigoin take the top spot in both 2wd and 4wd and in the final would convert his form into convincing wins in both classes. In 2wd he would beat out Xray driver Renaud Savoya who took 2nd with X-Factory driver Alexis Dufau in 3rd. In 4wd it would be Savoya again in 2nd, this time beating out Xray/Orion team mate Lorenzo Crolla in 3rd.

Thanks to Yannick Aigoin for the report.