February 2, 2018

Xray NT1 2018 1/10th 200mm nitro on-road kit

Xray have introduced the latest incarnation of their IFMAR Worlds and EFRA European Championship winning NT1 200mm nitro platform, the NT1 2018. The kit features some subtle refinements in the chassis and rear bulkhead and layshaft mount area, mostly to adapt the chassis to a full range of grip conditions even better. The 2018 specification kit is based off of a redesigned 7075-T6 aluminium chassis that features a larger front opening for improved flex, with a milled-out pocket taking an optional alloy brace that has influence on the overall steering response and cornering speed. Using the brace will improve steering…


July 13, 2016

Xray NT1’16 1-piece brass engine mount

Xray has introduced an optional brass engine mount for the NT1’16 1/10th 200mm nitro on-road kit. Providing solid engine mounting and easy gear mesh adjustment the part also adds a certain weight which can be beneficial in various track conditions as the mount moves the weight balance further back, improving the rotation of the car in medium-high traction conditions. Source: Xray [teamxray.com] FacebookTwitter…


April 26, 2016

Xray RX8 2016 1/8th nitro on-road kit

…come with new, longer ball ends to add to the new geometry while allowing optimised up and down travel values. As for the new wire front anti-roll bar, the common design makes for improved handling on tight track while also being easy to adjust thanks to different thickness wires and “touring car style” mounts. An optional blade-type front anti-roll bar is available for larger, open tracks. The body mount duties are taken care of by new aluminium front body posts while the rear body mount features three positions for downforce adjustments. Finally the RX8’16 utilises all-new pinion gears. They replace…


June 16, 2015

Xray NT1’15 optional rear anti-roll bars

Xray have new optional rear anti-roll bars for the NT1’15 200mm nitro on-road car available. To the standard 2.0mm variant add harder 2.2mm, 2.4mm and 2.6mm wires that help to fine-tune the roll characteristics of the car. The black wires come laser-etched for easy identification. Source: Xray [teamxray.com] FacebookTwitter…


April 10, 2015

Xray NT1’15 200mm nitro on-road kit

…flex characteristic using different bushings on for the servo saver post. Additional Multi-Flex setting in the front and rear of the radio plate further enhance the ability to fine-tune the flex characteristics to your liking. Furthermore a rear stiffener link was designed to connect the radio plate and the rear 2-speed bulkhead, again in a wake to allow for maximised flex adjustment capability. Moving to the rear end the 2015 NT1 features new, smaller rear uprights with optimised wheel bearing fitment, two upper camper link positions and the possibility to mount optional 2-piece carbon fibre aero discs. The NT1’15 also…


May 19, 2011

Capricorn LAB C801 & C01 options

Capricorn have released a whole bunch of new options for their LAB C801 and C01 chassis’. First up is rear flex system for the C801 which allows the rear of the car’s radio plate to flex separately from the radio plate mounting bracket giving more overall grip. This can be used with the optional full flex radio plate to give more steering and which was used by Dario Balestri to take 3rd place at last month’s World Championships. Also for the C801, something taken from the C01, is the new front anti-roll bar system that allows you to use a…


February 3, 2011

Toy Fair 2011 – Xray

…offer a large amount of roll centre adjustment. The car’s most visible update is the new high downforce cab forward body shell, following the current trend seen from other manufacturers. Less noticeable updates include new shock o-rings to prevent leaking, and the inclusion of ribbed shock membranes as standard. The NT1 has been updated with a new chassis plate that allows the mounting of supplied carbon plates that help retain the same low weight as before but prevent stones and dirt from going into the main pulleys. These mounting points also allow the use of optional brass weights that help…


November 2, 2010

Xray NT1 brass engine mount

Xray have released this optional brass engine mount for the NT1 that provides solid engine mounting and easy adjustment. The Monoblock Engine Mount is recommended for all conditions, providing a stiffer design than the standard single engine mounts but is still a bit more flexible than the Multi-Flex 1-Piece Engine Mounting System. The engine area of the car and the area between engine and 2-speed is reinforced but the flex of the chassis is still available. This reinforced area of the chassis between the engine and 2-speed gears reduces the chance of spur gear breakage or stripping. CNC-machined from premium…


Tonisport
LC Racing
Monaco RC
T-Works
RC Mart