Red RC » Sebastian

July 3, 2017

Mibosport Summer Race – Report

The Mibosport Summer Race was held this past weekend in Blansko. The event attracted 43 drivers to compete in the five classes of Touring Modified, Stock LRP, Formula, Truck and LeMans. Radek Flek was in the lead after the second qualifying round of the Touring Car Modified class ahead of Michal Bok and Ladislav Lebánek. The third run was prematurely stopped due to rain and it was decided that the round would not be repeated. In the Stock LRP class Vlastimil Švec took the TQ after the third qualifying round ahead of Michal Blahovský and David Měšťan. The TQ in the Formula class went to Svetlin Douhlevski who won the qualifying very closely ahead of Lukáš Hoch. Martin Janíček took the third spot on the grid. Unfortunately the Truck and LeMans classes only saw a handful of entries and so it was decides to run both classes together in the qualifying and race and after Q3 it was Leoš Bulva with a tight gap to Milan Peška in the Truck class while Roman Krejčí took a comfortable TQ in the LeMans category.

Continue reading the report here

July 3, 2017

Boots & Sartel successful at Pro-Line European Challenge

The 2017 Pro-Line European Challenge was hosted by the Mini Auto-Club Saint-Quentinois in France this past weekend. The event attracted both national and international 1/8th buggy racers to compete in the two classes of nitro and electric. In Nitro Buggy it was Kyosho’s Elliott Boots who brought home the TQ and win, leaving Team Associated’s Jamie Clancy and Xray’s Jean-Pierrick Sartel behind in 2nd and 3rd respectively.

Continue reading here

July 2, 2017

SWorkz 1/8th pinion gears

SWorkz have expanded their range of 1/8th scale pinion gears by 18T, 19T and 20T variants. The module 1 gears are precisely cut, they feature laser-engraved markings for easy identification and they are usable for all 1/8th vehicles with module 1 main gears.

Source: MW RC Cars [mwrccars.at]

July 2, 2017

2017 EFRA 1/10th Electric Track Euros – Report

The 2017 EFRA 1/10th Electric Track European Championship was held this weekend in Almussafes, Spain. Unseasonable rain here in Spain put the drivers, and their cars, in a spin at the finals on Saturday until the sun came out and normal service was resumed. In ISTC Modified Touring and with the first A-final held about 90 minutes after the rain stopped grip was beginning to return to the Almusafes track. However neither of the front row starters could find any traction and it was P3 starter Marc Rheinard who shot into the lead, which he held for the entire five minutes. Behind him runner-up after the qualifiers, Bruno Coelho clung on to his 2nd place starting position, but pole man Ronald Volker had a nightmare spinning out four times before retiring from the race.

Continue reading the report here

July 1, 2017

T-Works 1/8th off-road & GT twin motor starter box

T-Works have introduced their new twin motor starter box for 1/8th scale off-road and GT vehicles. Using a laser-engraved black aluminium case with adjustable rubber chassis stops the box makes use of dual 775-class motors that offer a high torque, ensuring easy starting even of factory new engines. A tough drivetrain helps with reliability and the box can be powered by dual NiMH or LiPo packs as well as a 12V lead-acid battery.

View more images here

June 30, 2017

Tekno SCT/SL low frequency springs

Tekno have introduced a complete line of Low Frequency springs for the SCT410.3 and EB48SL vehicles. The new design improves traction by reducing chassis oscillation on rough track surfaces and large jump landings. Better stability of the vehicle is achieved, providing more forward grip, increased corner speed and quicker lap times. The spring length has been reduced by 13mm in front and 15mm in the rear to allow for lower ride height adjustments which in turn increases corner speed under high traction conditions, such as carpet or astro-turf, where lower ride heights are essential. With additional coils as well as a larger wire diameter, the new LF springs feature a natural silver finish with a colour indicator for easy spring identification. They directly replace existing springs and are intended to be used on the SCT410, SCT410.3 and the EB48SL vehicles. The set includes two springs and available are five front and five rear sets.

View the rear springs here

June 30, 2017

VRP E817 aluminium servo mount

Coming from VRP is an aluminium servo mount for the HB Racing E817 off-road buggy. The mount takes the place of the stock plastic mount, which can be sloppy and move under load from the servo. The VRP mount is CNC-cut from American grade 7075 aluminium, it comes black anodised and laser-etched, and it includes three aluminium servo mount posts to secure the mount to the chassis.

Source: VRP [visionracingproducts.com]

June 30, 2017

Xray Racing Series Austria – Announcement

The Xray Racing Series Austria will take place on the weekend of the 23rd of July at the MRC Wiener Neustradt track in Vienna. Held in Modified, Pro Stock and Formula classes the event will see a full day of practice, including the famous floodlight practice, on Saturday with Sunday being race day. More information, rules and registration are available here.