Red RC » Sebastian

March 14, 2016

Protoform WCICS Rd7 – Report

The Protoform Western Canadian Indoor Championship Series held round 7 in BC’s “Tournament Capital”, Kamloops, British Columbia, hosted by the Thompson Valley R/C Race Club. It was a great race weekend, lots of entries, with full heats all around. As usual, TVRCRC threw down a unique layout that left drivers looking for every inch on track to shave off the lap times with the bravest pulling out all the stops to make time in the tightest of chicanes. In the premier Touring Modified class the top 3 would slip away, with a chase for the win. Q3 Jason Melnyk however was sent airborne off track doing the first lap. His car would not survive and he would be a spectator for the 5 minute main. TQ Blake Bell and Korgae Scales would clear the pack quickly and just after setting his fastest lap, Korgae would have some issues in traffic, widening the distance to Blake and allowing Q4 John Tsang through for second. It would appear the car did not survive the incident undamaged, and after another slow lap, Scales joined Melnyk as a spectator. The second incident entangled Tsang, and allowed Luke Pittman a break into second position. Tsang closed the gap, but was unable to pass Pittman by the buzzer, just 0.25sec back.

Continue reading the report here

March 14, 2016

Reno Savoya successful at French E-Buggy Nats Rd1

This past weekend the opening round of the French RCMBT 1/8th E-Buggy Nationals was held at the famous Montpellier track. In its fourth season the championship, that is put together by rcmag.com, regularly attracts the country’s fastest drivers such as Yannick Aigoin, Jerome Sartel and Reno Savoya and round 1 was no exception. Following controlled practice on Friday the event saw triple 10 minute qualifiers on Saturday and it was TLR’s Reno Savoya who would take the TQ by winning two of the three rounds. Only Yannick Aigoin denied Reno a clean sweep as the Xray driver grabbed the TQ in the final round by less then 1 second. The triple A-mains then were a done deal for Yannick who won the opening leg with a margin of 10 seconds from Yannick Aigoin and Carl Maignien. In A2 it was again Reno who came out fastest, wrapping up the overall win with one leg to spare. Behind Sayova it was again the duo of Aigoin and Maignien who came in second and third. The third and final A-main then was won by Jerome Sartel from Yannick to grab the final podium spot.

View the top 5 result here

March 13, 2016

Wesley van Helmond wins MIO Cup 2WD title

The MIO International Indoor Off-road Cup recently concluded with the fifth and final round of the championship. TLR’s Wesley van Helmond would grab the overall title in the highly competitive 2WD Buggy class, that attracted nearly 100 drivers over the season, with three wins and a second pace from Schumacher driver Oliver Speith who scored two wins and two runner-up spots. The third place was gabbed by Dutch 1/8th buggy star Bart Mullink (Schumacher). In the 4WD Buggy class the overall title went to Yokomo driver David Pauwels in front of the Xray duo of Arie Vos and Jack Box. In the Youth category the winning honours went to Senne Pauwels (Yokomo), son of 4WD winner David, from Max Ceelen (TLR) and Jayden Vos (Xray).

View all title winners here

March 13, 2016

VIP Performance VPL V2 Pro10 bodyshell

German company VIP Performance have introduced the new VPL V2 Pro10 bodyshell. The redesigned version 2 features a 5mm lower rear end, a refined cockpit shape and new front stiffeners for improved corner speed. The body is made from clear polycarbonate, it fits most “wide” 1/10th scale Pro10 pan car chassis and it is available now.

Source: VIP Performance [vip-rc.com]

March 13, 2016

Framega Fenix YR-10 aluminium main chassis plate

Framega in cooperation with Fenix Racing have introduced an aluminium main chassis plate for the Yokomo YR-10 formula car. Developed and manufactured in Italy the 2mm chassis is made from high-quality 7075-T6 aluminium and made to replace the standard carbon fibre part with a stiffer solution for improved car performance especially on high-bite surfaces or when using high-grip tyres. The part is available for pre-order now and it should become available around mid-March.

Source: Framega [framega.com]

March 11, 2016

Bittydesign 1/10th formula bodyshell – Teaser

Italian company Bittydesign have released a first teaser image of their forthcoming 1/10th scale formula bodyshell. The body will fit most of today’s formula chassis and all information along with proper images will become available in the 15th of March.

Source: Bittydesign [bittydesign.net]

March 11, 2016

Serpent Cobra SRX8 1/8th nitro buggy – Coming soon

Serpent Cobra SRX8 – Coming soon

Serpent have released a first teaser for their forthcoming Cobra SRX8 1/8th scale nitro off-road buggy. Doing away with the former S811 name in favour of calling the buggy the SRX8 suggests that the vehicle had undergone a certain redesign. Detailled information will become available in time for the release which is scheduled for late March/early April but getting a first taste of the new buggy will be possible at the upcoming Silver State and Neo16 race events.

Source: Serpent [serpent.com]

March 11, 2016

TWT Team Edition acrylic setup boards

TWT have introduced new versions of their acrylic setup boards with updated layouts. Developed in cooperation with their team drivers such as Jilles Groskamp and Meen Vejrak the boards offer different pocket locations for small parts and also TWT’s acrylic car stand, making for a more convenient and ergonomic use. All boards feature a white upper plate with measurement grid and coloured bottom sides with foam-cladded pockets with the blue board being the Groskamp edition, the red one being the Surikarn board and the black one the Meen edition.

View the other team boards here