Red RC » Sebastian

April 14, 2015

Shepherd Velox V10 Pro 1-piece engine mount

Shepherd introduce a new option part for the Velox V10 Pro 1/10th 200mm nitro on-road kit. The 1-piece engine mount with various flex options will stiffen up the rear end of the chassis for more constant rear traction especially in fast corners on high-grip tracks. Fixed with the four screws of the standard engine mounts the rear end is just a little bit stiffer while still allowing for longitudinal flex. To increase the stiffness even more the engine mount can be fixed with another three screws, two under the radio plate and one under the gear shaft. The option part is available from now on and fits all Velox V10 Pro 2015 or older spec models equipped with the team edition chassis plate.

Click here to view a photo of the engine mount in place

April 14, 2015

Western German Championships Rd1 – Report

The first of four rounds of the Western German Nitro Onroad Championships was held at the track of the MCK Dormagen in the North of Cologne. A total of 65 competitors joined this first qualifier for the German Nationals in the three classes of 1/8th scale class 1 and 2 and as well as 1/10th scale 200mm. Following the Nitro-West warmup race two weeks before, which has been washed out by rain, all drivers tried to make maximum use of the ten hours of practice on Saturday, which was interrupted by slight rain for about one hour at lunch time. Unfortunately more rain hit the track in the evening which resulted in a still damp track during the first heat on Sunday morning.

Click here to continue reading the report

April 14, 2015

Max Mört joins Alphaform Reds JQRacing Team

Alphaform Reds JQRacing havoc announced the signing of young and talented Max Mört from Finland to their factory team. Max will now be running Reds Racing engines, LRP electronics, AKA tyres, Savöx servos, GHEA Accessories and Maugrafix stickers. Max has been a part of the JQRacing team for quite a few years and he will now be getting a full factory ride.

Source: JQRacing [jq-products.com]

April 14, 2015

Serpent 748 TQ rear chassis stiffener set

New from Serpent and made for the 748 TQ 200mm nitro on-road car is a rear chassis stiffener set. Designed to connect the radio plate with the right hand 2-speed bulkhead the link is best used on high-bite tracks that can put a lot of stress on the chassis during hard braking. The stiffener prevents unwanted flex for an improved brake feeling and it mounts directly to the 748 TQ and it can also be used on standard 748’s if equipped with the TQ’s right hand bearing and brake holder or in case some DIY work is carried out on the standard part.

Source: Serpent [serpent.com]

April 14, 2015

Joel Valander sweeps Model Expo Race

Last weekend the final round of the Finnish National Winterjumps 1/10th off-road series was held at the annual Model Expo fair that, combined with other fairs held at the same time, attracted some 40,000 visitors in total. The race was held in 2WD and 4WD electric off-road classes and it attracted some 40 entries to race on a purpose-built concrete track with carpet-clad jumps. In the 2WD class, run on Saturday, Joel Valander controlled the qualifiers to secure the overall TQ. Team mate Lari Jäppinen would start from 2nd into the finals.

Click here to continue reading the report

April 14, 2015

Gunther van Staey stays with Serpent

Serpent have announced the re-signing of top Belgium 1/8th nitro on-road racer Gunther van Staey to their Benelux team for 2015. The 2014 Dutch champion will try to defend his title while also competing at selected Benelux and ENS races as well as the 1/8th Euros in Germany.

Source: Serpent [serpent.com]

April 14, 2015

Lee Martin sweeps BRCA 1/10th Buggy Nationals Rd1

The first round of this year’s BRCA 1/10th Electric Off-Road Nationals was held at the Robin Hood Raceway. Team Associated’s Neil Cragg took the TQs in both the 2WD and 4WD classes but it was Yokomo’s Lee Martin who ended the day on top of the podium in both classes. Neil came in 2nd while Yokomo driver Tom Cockerill completed the top 3 result both in 2WD and 4WD.

Source: BRCA [brca.org]

April 14, 2015

Carson Wernimont doubles at JBRL Nitro Series Rd1

The opening round of the 2015 Jimmy Babcock Racing League series was held at the Pro-Line Raceway in Banning, California. Run in several 1/8th off-road categories including 1/8th E-Buggy the event always attracts a good mixture of World-renown drivers and local talent. In the premier class of 1/8th Nitro Buggy Team Associated’s Carson Wernimont took the win driving a prototype of the forthcoming RC8B3 buggy in front of Drew Moller (HB) and newly signed Mugen racer Adam Drake.

Click here to continue reading