Red RC » Sebastian

November 21, 2014

Tonisport-Winter-Cup Rd2 – Report

The 2nd round of the Tonisport-Winter-Cup was held at the Eifel-Ring, a permanent indoor track in Leimbach, close to the World-famous Nürburgring. A total of 40 racers attended the race that was organized by the MAC Adenau. The 13.5T Touring Car class saw an impressive battle for positions already in the three six-minutes qualifying heats. Finally Ingo Herschbach took pole position in front of his Serpent fellows Majuran Tharmalingam and Oliver Kaufmann, winner of the first TWC race weekend.

Continue reading the report here

November 21, 2014

Spec-R TRF418/419 P8 version double joint driveshafts

Made for the Tamiya TRF418 and TRF419 are the P8 double joint driveshafts from Spec-R. They are of a reinforced design with a large diameter cross joint, 1.8mm cross pins and strong 0.8mm circlips for the cross pins. Made from high quality spring steel and offering precision-ground wheel axles the shafts are recommended for the use in combination with a front spool axle and they minimise wheel chatter at high steering angles due to their design.

Source: Spec-R [spec-r.com]

November 21, 2014

Shepherd Velox V10 Ackermann plate & linkage parts

Shepherd have a new option part for the Velox V10 Pro 200mm nitro on-road car available in the form of an updated steering Ackermann plate and linkage parts. Due to a much smaller steering differential angle, the new 8mm servo saver Ackermann plate provides even more steering and a completely different, more aggressive overall handling. Prototypes have been successfully tested at the this year’s European and World Championships and also at the ENS in Fiorano with a higher corner speed noticed by all drivers. The servo saver Ackermann plate is available as a set including new 4.9mm uniballs and ball joints or as a single part from now on. The new uniballs and ball joints are also available separately as a replacement of the standard parts to eliminate play in the V8 and V10 steering linkage while allowing smooth operation.

Click here to view the linkage set

November 21, 2014

Team C TM8 1/8th nitro buggy coming soon

Team C have released a first teaser image of the forthcoming TM8 1/8th nitro off-road buggy. So far only one CAD rendering is available and from the looks of things the buggy will be of a class-standard design although it is not clear if some fancy gizmos are hidden behind the front shock tower. We bring you more information as soon as we get them.

Source: Team C [teamcracing.net]

November 21, 2014

Lucas Sanford wins at Gun Smoke Classic

The recent Gun Smoke Classic race held at IERC Raceway in San Bernardino, CA saw a tight battle of Lucas Sanford, David Jenson and Brian Sullivan over the top spots in the 1/8th E-Buggy class. Brian Sullivan had a very good run in the first heat taking the TQ but Lucas Sandford would take the overall TQ in Rd1 by 2 seconds and a near perfect run. In Q2, David Jenson pressed hard for the entire race, but Sanford had another great run taking the win. Sanfords 2nd round TQ meant he would not have to race the third qualifier, and would start on the pole for Sunday’s A-mains, with Eric McNeil 2nd and Brian Sullivan 3rd.

Click here to continue reading

November 21, 2014

Alberta Touring Series Rd1 – Report

Round 1 of the newly established Alberta Touring Series was held in Calgary, Alberta, hosted by the CARCAR club. 125 entries spread across the five classes of Touring Car Modified, Touring Car Stock, Mini, 1/12th scale Stock and Formula. In the Touring Modified class where the Reedy Race Format was used, there were 24 entries, with five rounds of random sorted heads up racing. In the end, Steve Soon (Serpent) with a five win record beat out Peter Toszer (Team Associated) on tiebreak points to take top spot on the podium with Wayne Mah (Awesomatix) coming in 3rd.

Click here to continue reading the report

November 21, 2014

Fenix Phi-Gamma 1/10th formula bodyshell

Fenix Racing from Italy introduce their new Phi-Gamma formula bodyshell for 1/10th cars. Designed using 3D CAD software with Computational Fluid Dynamics validation for improved aerodynamics, the body is best used on medium to fast tracks and it is completely tuneable in terms of downforce and drag. The body is made from clear polycarbonate and fits most of today’s formula chassis.

Source: Fenix [fenix-racing.com]

November 20, 2014

Favrelle & Delalondre win at French Winter Nats Rd2

The 2nd round of the French Winter Nationals was held at the AMC Tours club in central France. In the Touring Car Modified class Maxime Favrelle (Yokomo) took the pole position for the finals and later on was able to bring home the overall win from Remi Callens (Xray) and Jeremy Limoges (Xray). In the Touring Car stock class Jeremy Delalondre (Yokomo) came out successful from Pierre Delorme (Xray) and young Steve Favrelle (Yokomo).

Click here to continue reading