May 7, 2018

T-Works roll-up pit mats

New from T-Works come two roll-up pit mats with different designs. Both measure 120x60cm and they sport either a black and white or graffito style print. The mats are made of high-quality material, they help to keep pit tables clean and they include a handy carry strap for easy transportation and storage.

View the Graffito style pit mat & carry strap here


May 7, 2018

Layton, Turner & Zhao win at California Turf Cup

The 2018 California Turf Cup was hosted by Silver Dollar Raceway in Chico, California over the weekend. The event was held in the usual variety of Modified and Stock classes an the 2WD Open Buggy category it was Kyle Turner with the overall TQ thanks to winning round 1 and 2 as Q3 winner, Kyle Layton would secure the P2 spot on the grid. In 4WD Open Buggy it was also Kyle Turner with the TQ courtesy of coming out fastest in Q2 and Q3 while Q1 winner, Brian Strange had to settle for 2nd on the grid. In the very competitive 13.5 4WD class Patrick Zhao TQ’d from Julian Jimenez.

Continue reading here


May 7, 2018

Brandon Clements doubles at CTS3 Rd4

Round four of the CTS3 was held at Roadrunners RC Club in Camarillo, California over the weekend. Fresh asphalt made racing close throughout the whole weekend and as the weather was perfect the track conditions were consistent. This round’s special guest appearance was the “Fabulous” Barry Baker, however in Modified Touring, it was Awesomatix driver Brandon Clements with the overall TQ, and he also came out victorious against a strong competition, with Team Associated driver Rick Hohwart in 2nd and team mate Randy Caster in 3rd. In 17.5 Touring it was Brandon Clements again who got the TQ honors and secured the win followed by Armond DeForest in 2nd and JD Ramsey in 3rd. In USGT Clayton Young TQ’d and he also took the win followed by Mark Goldwater in 2nd and Charles Lightfoot in 3rd. In Formula, it was Charles Lightfoot followed by Mark Goldwater in 2nd and Doug Rebal TQ in 3rd.

Source: CTS3 [facebook.com]


May 7, 2018

Berkan Kilic wins at North German regionals Rd2

The Braunschweig track near Hanover played host to the second round of the North German 1/8th Off-road regionals this past weekend. The track was pretty challenging with its natural clay surface and a lot of small holes and most of the drivers already showed up on Saturday to make maximum use of the practice time. After the 20-minute semi finals on Sunday it was Berkan Kilic (Agama) with the TQ from Burak Kilic (Agama) on the 2 spot and Phillip Guschel (Xray) starting from P3. In the opening stages of the 40-minute A-main final Burak was able to get past Berkan and he even slightly separated from the field until he ran into mechanical issues that promoted Berkan into the lead again that he would hold onto until the checkered flag. Marcel Paul (Kyosho) would obtain the 2nd spot from Phillip Guschl 3rd. However as the latter was only a guest starter it was Ilias Reise (Agama) who would round out the podium result.

Thanks to Abdullah Kilic for the report.


May 7, 2018

Ongaro & Hara win at 2018 Philippine Masters

The 2018 Philippine Masters was held at the Circulo Verde Race Track in Quezon City, Philippines over the weekend, attracting many World-class 1/8th off-road drivers from all over the planet. The nitro 1/8-scale event contests only buggies and truggies – no Sportsman, or other classes. In the one-hour Buggy final, it was Mugen Seiki’s Robert Batlle who put up a fierce early battle with Ronnefalk who was battling for the lead from his P3 position. The two drove clean and changed places often, but Batlle didn’t seem to have the same speed that carried him to TQ. Whether it was engine power, tire choice or other variable, Batlle just couldn’t hold his earlier lines and mistakes started to plague him sending him down the list of drivers.

Continue reading the report here


May 7, 2018

Yeah Racing YD2 series adjustable suspension mounts

Coming from Yeah Racing and made for Yokomo’s YD2 series of RWD drift cars is an adjustable suspension mount set. Included are 1-piece front and rear suspension mounts that utilise composite inserts to adjust the height and angle of the suspension pins in order to fine-tune the suspension settings. The mounts are machined from quality aluminium, they come black anodised and with machined silver edge details. The included composite inserts are conveniently marked for easy identification and the set is available now.

View another image here


May 7, 2018

Orlowski & Savoya win at EFRA 1/10 Buggy warm-up

The Reims Enduro Model Car club in France hosted the EFRA 1/10 Buggy Euros warm-up race this past weekend at their indoor dirt track facility. The event was well attended, attracting many of Europe’s fast electric off-road drivers. The 2WD Modified Buggy class saw Schumacher’s Michal Orlowski sweeping the qualifiers to take the TQ from TLR’s Renaud Savoya 2nd and Yokomo’s Lee Martin 3rd. In the 4WD Mod Buggy class it was Renaud who excelled, TQing five of the six rounds gave him the pole for the A-mains from Michal Orlowski 2nd and Lee Martin 3rd.

Continue reading the report here


May 7, 2018

Power HD sign Thilo Tödtmann

Power HD have announced the signing of German nitro front runner Thilo Tödtmann to their factory team. Specialised in nitro racing, Thilo is a multiple European Championship finalist as well as multi-time US Nitro World Cup winner, ENS podium finisher and reigning international 1/10th Nitro FEMCA Champion. Thilo will be using Power HD’s Storm-7 servos in his rides and he has the following to say about the deal:

I would like to thank everyone at Power HD to let me join their factory Team for the 2018 season and beyond. After my first test this decision was very easy to make as their products perform awesome. I am looking forward to a great collaborate and i am sure together we can achieve great results.

Source: Power HD [chd.hk]