Red RC » 7075.it

January 16, 2020

7075.it T4’20 LCG high traction aluminium chassis

7075.it have announced the release of their new LCG high traction aluminium chassis for the Xray T4 2020 touring car. The full face chassis offers limited torsional flex compared to 7075.it‘s LCG chassis and is ideal for very high traction conditions where it can help to settle down the reaction of the car while countering traction rolling. The chassis offers two milled pockets in the steering area that allow to attach optional brass weights in the lowest possible position, ensuring an overall lower centre of gravity and thus improved cornering in high grip conditions. The chassis comes black anodised, with machined silver edge details and it is available separately or including two brass balance weights.

View more images here

January 15, 2020

7075.it slim pack battery stops

Coming from 7075.it and made for their free flex battery mount are slim pack battery stops. Machined from 3mm 7075-T6 aluminium the battery hooks are narrower than the original parts, allowing for secure fitment of the new slim LiPo battery packs such as the one from Sunpadow. The hooks come black anodised and with laser-engraved logos for surface protection and professional looks.

View more images here

January 14, 2020

7075.it A800MMX LCG alloy chassis & top decks

Coming from 7075.it and made for the Awesomatix A800MMX mid motor touring car are a new LCG aluminium main chassis and split aluminium top decks. Starting with the chassis, the main plate is machined from high-quality 7075-T6 aluminium and it comes black anodised for wear and looks while machined silver edge details further enhance the visual appearance. Strategically machined holes make for optimised flex characteristics and incorporated into the design are also milled out sections to add brass weights that help to fine-tune the weight balance if needed. The chassis is available separately or including two front brass weights.

Continue reading here

December 4, 2019

7075.it T4’20 aluminium eccentric diff holders

7075.it from Italy have introduced their redesigned aluminium eccentric diff holder for the T4 2020 touring car. Machined from high-quality 7075-T6 aluminium and coming black anodised for surface protection, the bearing holders offer optimised bearing fit for less natural drivetrain drag and better heat dissipation compared to the standard composite parts, resulting in improved overall performance and bearing life. The eccentric inserts are available as pairs from now on.

Source: 7075.it [7075.it]

November 29, 2019

7075.it Inferno MP10 closed switch cover

Made for the Kyosho Inferno MP10 1/8th off-road buggy is 7075.it’s closed switch cover. Machined from high-quality aluminium and coming with an anodised surface finish for wear and looks, the laser-etched part replaces the standard switch cover with a closed variant for all drivers that scrapped the standard switch over a DIY “plug” solution.

Source: 7075.it [7075.it]

November 22, 2019

7075.it T4 2020 aluminium & brass optionals

7075 Special Parts from Italy have introduced first option parts for the Xray T4 2020 touring car. First up is a low centre of gravity aluminium main chassis that allows for easy placement of balance weights using single screws. Machined cut-outs enable the racer to position optional brass weights which not only adds to the overall appearance but the weights are also secured in a much safer manner compared to just using tape to securing them to the chassis. The main plate comes machined from high-quality 7075 aluminium, it sports a black surface coating for wear and it is available separately or including a set of low-profile brass balance weights.

Continue reading here

September 12, 2019

7075.it T4F aluminium & brass option parts

7075 Special Parts from Italy have announced the release of more aluminium and brass option parts for the Xray T4F FWD touring car. First up is a LCG 7075-T6 aluminium chassis that is stiffer and narrower than the original carbon fibre chassis, making it ideal for medium to high-bite track conditions. Excessive machining of the rear portion still allows for a certain amount of flex, retaining good rear end side bite. The chassis is available separately or as combo package including front, centre and rear end brass weights.

Continue reading here

August 7, 2019

7075.it T4F aluminium 30mm fan holder

7075.it have announced the release of an aluminium motor fan mount for the Xray T4F FWD touring car. The mount utilises two non-used mounting holes of the motor, ensuring easy, reliable and lightweight fixing of any 30mm fan. Machined from high-quality aluminium and coming black anodised and with laser-etched markings, the mount is also usable with other front-wheel touring cars that use low-CG motor mounts.

View another image here