July 13, 2022

JConcepts Landmines pre-mounted for Arrma Mojave

JConcepts designers have opened the imagination to create an all-new performance scale tire for the Arrma Mojave. The Landmines, available pre-mounted, developed after tuning and analysis have reached the summit and now available to the Mojave enthusiast. The design starts with a robust carcass carefully shaped and sized for a multitude of conditions and capable of bashing those difficult courses while being down-to-earth enough to carry a scale appearance. The team spent considerable time with the split-block centre design which has been sliced, stepped, and recessed for flexibility and contortion over sharp, loose, and polished surfaces. The Landmines have alternating solid and cavity pads which is ideal for transitioning from smooth dirt or pavement into dirt, mud, and rocky terrain. Moving toward the edges of the carcass, the tire has horizontal grippy pads with edge and channels to provide additional forward bite.

View the set of premounted Landmines here

November 18, 2021

JConcepts Warrior Arrma Typhon body

The Warrior body by JConcepts features a design that has, frankly, gone a little mad. The design process was simple, throw out the conventional principals and centre the design around a battle tested look, fit and finish. The Warrior is protected from the competition with a heavily wrapped roll-cage to provide strength in every direction. The racers eye is drawn to the unique split front window, protecting the cockpit from the occasional aerial assault of lap traffic. The rear upper pods blend into the rear section of the body to start a ramping feature which tops-off at the rear body mounts. The side-pods are tall and with an additional scoop built on top to accommodate an assortment of different type of battery packs. The sides of the body shell fit the chassis like a glove and allows plenty of electrical clearance inside the shell. The body is an experienced racer too, featuring a vent that may be trimmed by the user and opened on the front of the scoops and off the back of the cab providing air-intake or escape packages for the skilled and crafty driver. Fully committed, the Warrior body features cut lines for the Arrma Typhon or the TLR Tuned version.

View more angles of the Warrior body here

November 18, 2021

Protoform Mustang GT body for Vendetta & Infraction

For the Arrma Vendetta & Infraction 570 Mega Protoform have introduced this 2021 Ford Mustang GT body. They combined the signature wide-mouth grille, hood scoops and powerful stance of the 1:1 6th-Gen S550 Mustang with some pro-touring tuner style fender flares to transform the look of your car. Included is a sculpted rear wing to complete the super-scale look. This Mustang is formed from durable 1mm thick high-quality polycarbonate with paint-then-peel overspray film, and it also includes a detailed decal sheet and wing mounting hardware.

View more images of the Mustang GT here

September 24, 2021

Pro-Line Chevy Silverado 2500 HD body for Kraton 6S

Pro-Line is proud to bring the latest Chevy Silverado 2500 HD body style to your Monster Truck. Pro-Line has carefully recreated the details of the new 2500 HD and made it fit the Arrma Kraton 6S. Proudly Made from durable polycarbonate material that allows you to put your custom paint job onto your body. Paint-then-peel overspray film, window masks and scale Pro-Line decals are included with the body to take it to the next level.

View another image of the Silverado 2500 HD

September 24, 2021

Pro-Line Jeep Gladiator Rubicon for Stampede & Granite

Pro-Line have released the all-new Jeep Gladiator Rubicon body for your 1:10 Monster Truck. The Gladiator combines the iconic and unmistakable Jeep body styling with the utility and ruggedness of a truck that tells everyone that you are ready for adventure. Pro-Line has included all the scale Jeep Gladiator detail you would expect into the body and sticker sheet that will completely transform the look of your truck. The 1-piece body comes clear, so you can customise the look of your truck in any way you desire. Fits the Arrma Granite and Traxxas Stampede.

View another angle of the Gladiator Rubicon here

June 14, 2021

Bittydesign Seven65 body for Arrma 1/7th scale cars

Bittydesign have released this Seven65 body shell for the 1/7th scale Arrma Infraction/Limitless cars. Like their 1/8th GT version this too takes inspiration from British GT3 super cars but unlike that body, this new version benefits greatly from the Arrma’s more realistic wheelbase to make what is a great scale looking body shell. Made with high quality and genuine 1.5mm thick polycarbonate Lexan, it is sold clear with protective film outside and comes with a pre-cut decal sheet and windows masks and the kit includes a complete set of screws, nuts and large plastic washers to properly fix the rear wing.

View more images of the Seven65 here

February 18, 2021

Protoform Corvette C8 body for Felony & Infraction

Protoform are bringing one of the most anticipated cars Chevrolet has ever built to the 1:7 scale Arrma Street Bash line of vehicles with the release of the Corvette C8 body for Felony & Infraction. The officially licensed body is the ultimate aerodynamic upgrade to the popular Felony platform, whether you are making speed runs in the back roads or drifting in the parking lot. All the exceptional details of its 1:1 counterpart including aggressive cab-forward design, sculpted side doors, and vents are captured using the latest in 3D CAD and 5-axis milling technology. The extensive decal sheet lets you deck out your C8 with Corvette™ badges, windshield headers, ‘Jake’ skulls and USA flags. Also included are a custom add-on front splitter and rear wing to complete the super-scale look. The C8 is formed from durable 1.5mm thick high-quality polycarbonate with paint-then-peel overspray film. This body was designed with wider rear fenders as a direct fit for the Felony to clear the 53/107 tires.

View more angles of the C8 here

December 28, 2020

Pro-Line PowerStroke shocks for Arrma 3S & 4S vehicles

Pro-Line have introduced their high-performance PowerStroke Shocks specifically designed for your Arrma 3S and 4S vehicles. They include 14mm big bore aluminium shock bodies with infinite spring pre-load adjustment, strong machined aluminium shock caps, beefy 3.5mm shock shafts and true dual-rate springs for a massive performance and durability upgrade over the stock shocks. Pro-Line have also released a complete set of optional dual-rate front and rear springs. Mix and match the different upper and lower spring rates to dial in your suspension to the conditions. The 3 different upper and lower rates allow for 9 different combined spring rate options.

View the shock springs here