Red RC » Avid RC

December 1, 2018

Avid 2S charge lead cable with 4/5mm connectors

Coming from Avid are their new 2S balance charge lead cables with stepped 4mm/5mm bullet-type connectors. Designed to be colour coordinated for charging 2S battery packs, the pre-configured wires include gold-plated 4mm to 5mm bullets on the battery end to cover all battery types and 4mm bullets on the charging end. Comes with the popular XH 3pin balance plug, which most trim one of the plastic alignment rails with an x-acto to plug right into the charger instead of the balance port. Or owners can use the included XH 7pin if they don’t want to brave that. Balance leads are 63.5mm longer than the charge leads so they can easily be plugged into any charger design. The cables are available in black, red or blue colour.

View the red and blue leads here

August 11, 2018

Avid roll out new B6.1 & YZ-2 optionals

Avid have announced the release of new option parts for the Team Associated B6.1 and Yokomo YZ-2 2WD off-road buggies. Coming for the B6.1 are the customisable Evo slipper and Stock direct drive sets that are designed to replace the standard slipper assembly. The customisable Evo slipper set allows to choose two spur gears of 69T to 87T in size and either the triple CPD pads, triple red pads, triple white pads or two white and two red pads – all depending on the chosen application. The Evo slipper scrubs nearly 5g or weight compared to the stock slipper assembly for improved acceleration and efficiency.

Continue reading here

July 13, 2018

Avid B6.1 titanium slipper screw

Coming from Avid and made for Team Associated’s B6.1 based vehicles is a titanium slipper screw. Using the part will reduce the drivetrain’s rotating mass while the pre-pinned design ensures everything is staying in place. The screw is made from billet 6Al-4V titanium, it scrubs about 50 percent of weight compared to the stock steel screw and it includes a spare pin and is usable with all B6.1, T6.1 and SC6.1 kits.

Source: Avid [avidrc.com]

July 12, 2018

Avid TLR 22 4.0 carbon fibre electronics tray

Avid have announced the immediate release of their new carbon fibre electronics tray for the TLR 22 4.0 2WD buggy. The item is machined from 1.0mm carbon material and allows to remove the electronics easily and conveniently for cleaning or maintaining purposes. The tray including hardware weighs in at only 4.4g and it comes including two flathead screws and two black alloy nuts.

Source: Avid [avidrc.com]

June 28, 2018

Avid introduce MBX8 option parts range

Avid have released several products for the popular Mugen MBX8 buggy in the form of a couple of aluminium, titan and carbon fibre goodies. Available are aluminium shock standoffs in two and four-piece packs, +4.5mm offset rear alloy standoffs that provide more traction on low-bite tracks as well as a four-piece low-traction set that includes a pair of standard length standoffs for the front and +4.5mm standoffs for the rear. Also new are hard-anodised aluminium steering posts, hard-anodised front anti-twist arm inserts as well as titanium shock pins. Next up are 0.8mm, 1.0mm and 1.2mm carbon fibre arm inserts that are available separately for the front and rear A-arms and also as a complete set including a pair of each. Last but not least are bearing sets for both the MBX8 nitro and MBX8 Eco E-buggy kits.

View the other new parts here

March 23, 2018

Avid XB8 carbon rear chassis braces

Avid have introduced a rear carbon fibre chassis brace set for the Xray XB8 and XB8E buggies. The 1.5mm parts are designed to stiffen up the rear of the car for high traction surfaces and included in the set are two braces as well as three stainless steel screws and nuts. The set fits all 2016 to present XB8 and XB8E kits.

Source: Avid [avidrc.com]

March 14, 2018

Avid RC8B3/T3 HD aluminium steering rack

Coming from Avid and made for the Team Associated RC8B3 series of off-road vehicles is the HD aluminium steering rack. Made to prevent the easy bending of the stock steering rack by making it out of the strong 7075-T6 aluminium, the design also removes the relief pockets, and takes out the unnecessary kinks. The black anodised item comes with silver edge details and a laser-etched Avid logo. The rack fits all the vehicles in the RC8B3 and RC8T3 line.

Source: Avid [avidrc.com]

March 13, 2018

Avid T4 front suspension mount

The HD Xray T4 Front Suspension mount from Avid for the front-rear is a solid piece that bolts into all 4 screw holes making the front end very stiff. Testing found that this helped increase the immediate responsiveness of the steering and can be used in a variety of track conditions. Made from orange anodised 7075-T6 aluminium it features a laser etched Avid logo.

View more images of the mount here